3300XL8MM模块备件

330055-04-04-18-18-00-00-05-01

本附录列出了所有输入、输出、通用和环境规范，如下所示：
以及以下FLEX I/O模拟模块的认证：1794-IE8，
1794-IE8XT、1794-EE12、1794-OE4、1794-OE4XT、794-OE12，
1794-IE4XOE2，1794-IEEE 4xOE2XT，1794-IE8XOE4。
输入规格
以下是FLEX I/O模拟输入和输出的输入规范
模块的组合。
输入规格–1794-IE8、1794-IEEE 8XT、1794－IE12、1794－IE4XOE2、1794—IE4xOO2xT、1794－IE8XOE4模拟输入模块
规范1794-IE12 1794-IEEE 8xOE4 1794-IE 8、1794-IEC 8xT 1794-IE4XOE2，
1794-IE4XOE2XT
输入12个单端，
非隔离
8个单端，非隔离4个单端，
非隔离
决议
电压
现在的
320μV/cnt
0.641μA/cnt
2.56mV/cnt单极性；5.13 mV/cnt双极型
5.13μA/cnt
转换类型连续近似
转换率，全部
渠道
8.0ms 256μs
输入电流端子
（用户可配置）
4…20毫安
0…20毫安
输入电压端子
（用户可配置）
±10V
0…10V
正常模式抑制
比率
电压端子
电流端子
-0.05赫兹时为3分贝-20分贝/十年
-50赫兹时52分贝-60赫兹时54分贝
-1.5赫兹时为3分贝：-20分贝/十年
-50小时时为29分贝
-17赫兹时为3分贝-20分贝/十年
-50赫兹时为10.0分贝，60赫兹时为-11.4分贝
-9Hz时为3dB-20分贝/十年
-50赫兹时为15.3分贝，60赫兹时为-16.8分贝
阶跃响应达到63%
电压端子
电流端子
1.3秒
0.09秒
9.4ms
18.2ms
出版物1794-UM062B-EN-P-2020年3月
46规格
输出规格
以下是FLEX I/O模拟输出的输出规格，以及
模块的组合。
输入阻抗
电压端子
电流端子
>1MΩ
< 100 Ω(1)
100KΩ
238 Ω
对准确度
电压端子
电流端子
25°C时满量程的0.1%
25°C时满量程的0.1%
25°C时满量程的0.29%
25°C时满量程的0.29%
精度漂移
温度
电压端子
电流端子
0.00428%满量程/℃
0.00407%满量程/℃
大过载30V连续或32mA连续，
一次一个频道
（1） 如果从模块中去除24V DC，则输入电阻<100Ω。即使存在24V直流电，在0 mA电流输入时也是如此。如果施加了输入电流
电阻大于1MΩ。
输入规格–1794-IE8、1794-IEEE 8XT、1794－IE12、1794－IE4XOE2、1794—IE4xOO2xT、1794－IE8XOE4模拟输入模块
规范1794-IE12 1794-IEEE 8xOE4 1794-IE 8、1794-IEC 8xT 1794-IE4XOE2，
1794-IE4XOE2XT
输出规格–1794-OE41794-OE4XT，1794-EE121794-IE4XOE2，1794-IE4XEE2XT，794-IE8XOE4
规范1794-OE12 1794-IE8XOE4 1794-EE4、1794-OE4XT 1794-IE4XOE2，
1794-IE4XOE2XT
输出12个单端，
非隔离
4个单端，非隔离2个单端，
非隔离
输出电压范围，标称值±10V
输出电流，大0…20 mA
电压输出电流
负载，大
3毫安
电压分辨率320μV/cnt 2.56μV/cnt
电流分辨率为0.641μA/cnt和5.13μA/cnt
对准确度
电压端子
电流端子
0.1%满量程@25%
0.1%满量程@25%
0.133%满量程@25%
0.425%满量程@25%
精度漂移
温度
电压端子
电流端子
0.004%满量程/℃
0.004%满量程/℃
0.0045%满量程/℃
0.0069%满量程/℃
电阻负载，mA输出0…750Ω@24V DC 15…750Ω@24V DC
出版物1794-UM062B-EN-P-2020年3月
规格47
一般规格
以下是所有FLEX I/O模拟接口的通用规范
本出版物中的模块。
输出规格–1794-OE41794-OE4XT，1794-EE121794-IE4XOE2，1794-IE4XEE2XT，794-IE8XOE4
规范1794-IE12、1794-OE12，
1794-IE8XOE4
1794-IE81794-IE8XT、1794-OE41794-OE4XT、1784-IE4XOE2，
1794-IE4XOE2XT
模块位置1794-TB3G
1794-TB3GS
1794-TB2
1794-TB3
1794-TB3S
1794-TB3T
1794-TB3TS
仅适用于1794-OE4、1794-EE4XT
1794-TBN
钥匙开关位置1794-IE12
3.
1794-OE12
4.
1794-IE8XOE4
5.
1794-IE81794-IE8XT
3.
1794-OE41794-OE4XT
4.
1794-IE4XOE2，1794-IE4XOE2XT
5.
尺寸，约。
（HxWxD）
94.0 x 94.0×53.3毫米
（3.7x3.7x2.1in.）
45.7 x 94.0 x 53.3毫米
（1.8 x 3.7 x 2.1英寸）
无需校准
指示器1绿色/红色电源/状态指示器1绿色电源指示器
数据格式为16位2的补码，左对齐
外部直流电源，
笔名
24V直流电
外部直流电源，
电压范围
10.0…31.2V直流电
（包括5%的交流纹波）
19.2…31.2V直流电
（包括5%的交流纹波）
外部直流电源，
现在的
1794-IE12
24V DC时为30 mA；10V直流电时为45 mA
1794-OE12
24V DC时为320 mA；10伏直流电时为720毫安
1794-IE8XOE4
直流24V时为140 mA；10伏直流电时280毫安
24V DC时为70 mA
1794-IE81794-IE8XT
24V DC时为60 mA
12V直流电时为150 mA
FlexBus电流80 mA 70 mA
60 mA–仅适用于1794-IE8、1794-IEEE 8XT
隔离电压50V连续
在850V直流电下测试60秒，介于
系统的用户电源
个人之间没有隔离
渠道
50V连续电压
在用户电源与系统之间的850V直流电压下测试1秒
单个通道之间没有隔离
出版物1794-UM062B-EN-P-2020年3月
48规格
功耗，大1794-IE12
31.2V直流电时为1.2W
24V直流电时为1.1 W
10.0V直流电时为0.9 W
1794-OE12
31.2V直流电时为4.0 W
24V D时为4.3 W

330055-04-04-18-18-00-00-05-01

330055-04-04-18-18-00-00-05-01

This Appendix lists all input, output, general and environment specifications, as well as certifications for the following FLEX I/O Analog Modules: 1794-IE8, 1794-IE8XT, 1794-IE12, 1794-OE4, 1794-OE4XT, 1794-OE12, 1794-IE4XOE2, 1794-IE4XOE2XT, 1794-IE8XOE4. Input Specifications The following are input specifications for the FLEX I/O analog input and combination modules. Input Specifications – 1794-IE8, 1794-IE8XT, 1794-IE12, 1794-IE4XOE2, 1794-IE4XOE2XT, 1794-IE8XOE4 Analog Input Modules Specification 1794-IE12 1794-IE8XOE4 1794-IE8, 1794-IE8XT 1794-IE4XOE2, 1794-IE4XOE2XT Number of inputs 12 single-ended, non-isolated 8 single-ended, non-isolated 4 single-ended, non-isolated Resolution Voltage Current 320 μV/cnt 0.641 μA/cnt 2.56 mV/cnt unipolar; 5.13 mV/cnt bipolar 5.13 μA/cnt Conversion type Successive approx Conversion rate, all channels 8.0 ms 256 μs Input current terminal (user configurable) 4…20 mA 0…20 mA Input voltage terminal (user configurable) ±10V 0…10V Normal mode rejection ratio voltage terminal current terminal -3 db @ 0.05 Hz; -20 db/decade -52 db @ 50 Hz: -54 db @ 60 Hz -3 db @ 1.5 Hz: -20 db/decade -29 db @ 50 H -3 db @ 17 Hz; -20 db/decade -10.0 dB @ 50 Hz, -11.4 dB @ 60 Hz -3 db @ 9 Hz; -20 db/decade -15.3 dB @ 50 Hz, -16.8 dB @ 60 Hz Step response to 63% voltage terminal current terminal 1.3 s 0.09 s 9.4 ms 18.2 ms Publication 1794-UM062B-EN-P - March 2020 46 Specifications Output Specifications The following are output specifications for the FLEX I/O analog output and combination modules. Input Impedance Voltage Terminal Current Terminal > 1 MΩ < 100 Ω(1) 100 kΩ 238 Ω Absolute accuracy Voltage Terminal Current Terminal 0.1% Full scale @ 25 °C 0.1% Full scale @ 25 °C 0.29% Full scale @ 25 °C 0.29% Full scale @ 25 °C Accuracy Drift with Temperature Voltage Terminal Current Terminal 0.00428% Full scale/°C 0.00407% Full scale/°C Max overload 30V continuous or 32 mA continuous, one channel at a time (1) If 24V DC is removed from the module, input resistance is 1 MΩ. Input Specifications – 1794-IE8, 1794-IE8XT, 1794-IE12, 1794-IE4XOE2, 1794-IE4XOE2XT, 1794-IE8XOE4 Analog Input Modules Specification 1794-IE12 1794-IE8XOE4 1794-IE8, 1794-IE8XT 1794-IE4XOE2, 1794-IE4XOE2XT Output Specifications – 1794-OE4, 1794-OE4XT, 1794-OE12, 1794-IE4XOE2, 1794-IE4XOE2XT, 1794-IE8XOE4 Specification 1794-OE12 1794-IE8XOE4 1794-OE4, 1794-OE4XT 1794-IE4XOE2, 1794-IE4XOE2XT Number of outputs 12 single-ended, non-isolated 4 single-ended, non-isolated 2 single-ended, non-isolated Output voltage range, nom ±10V Output current, max 0…20 mA Voltage output current load, max 3 mA Voltage resolution 320 μV/cnt 2.56 μV/cnt Current resolution 0.641 μA/cnt 5.13 μA/cnt Absolute accuracy Voltage Terminal Current Terminal 0.1% Full scale @ 25% 0.1% Full scale @ 25% 0.133% Full scale @ 25% 0.425% Full scale @ 25% Accuracy Drift with Temperature Voltage Terminal Current Terminal 0.004% Full scale/° C 0.004% Full scale/° C 0.0045% Full scale/° C 0.0069% Full scale/° C Resistive load, mA output 0…750 Ω @ 24V DC 15…750 Ω @ 24V DC Publication 1794-UM062B-EN-P - March 2020 Specifications 47 General Specifications The following are general specifications common to all the FLEX I/O analog modules in this publication. Output Specifications – 1794-OE4, 1794-OE4XT, 1794-OE12, 1794-IE4XOE2, 1794-IE4XOE2XT, 1794-IE8XOE4 Specification 1794-IE12, 1794-OE12, 1794-IE8XOE4 1794-IE8, 1794-IE8XT, 1794-OE4, 1794-OE4XT,1794-IE4XOE2, 1794-IE4XOE2XT Module location 1794-TB3G 1794-TB3GS 1794-TB2 1794-TB3 1794 -TB3S 1794-TB3T 1794-TB3TS For 1794-OE4, 1794-OE4XT only 1794-TBN Keyswitch position 1794-IE12 3 1794-OE12 4 1794-IE8XOE4 5 1794-IE8, 1794-IE8XT 3 1794-OE4, 1794-OE4XT 4 1794-IE4XOE2, 1794-IE4XOE2XT 5 Dimensions, approx. (HxWxD) 94.0 x 94.0 x 53.3 mm (3.7 x 3.7 x 2.1 in.) 45.7 x 94.0 x 53.3 mm (1.8 x 3.7 x 2.1 in.) Calibration None required Indicators 1 green/red power/status indicator 1 green power indicator Data format 16 bit 2’s complement, left justified External DC power supply, nom 24V DC External DC power supply, voltage range 10.0…31.2V DC (includes 5% AC ripple) 19.2…31.2V DC (includes 5% AC ripple) External DC power supply, current 1794-IE12 30 mA @ 24V DC; 45 mA @ 10V DC 1794-OE12 320 mA @ 24V DC; 720 mA @ 10V DC 1794-IE8XOE4 140 mA @ 24V DC; 280 mA @ 10V DC 70 mA @ 24V DC 1794-IE8, 1794-IE8XT 60 mA @ 24V DC 150 mA @ 12V DC FlexBus current 80 mA 70 mA 60 mA – For 1794-IE8, 1794-IE8XT only Isolation voltage 50V continuous Tested at 850V DC for 60 s between user power to system No isolation between individual channels 50V continuous Tested @ 850V DC for 1 s between user power to system No isolation between individual channels Publication 1794-UM062B-EN-P - March 2020 48 Specifications Power dissipation, max. 1794-IE12 1.2 W @ 31.2V DC 1.1 W @ 24V DC 0.9 W @ 10.0V DC 1794-OE12 4.0 W @ 31.2V DC 4.3 W @ 24V DC 4.0 W @ 10.0V DC 1794-IE8XOE4 3.0 W @ 31.2V DC 2.3 W @ 24V DC 2.0 W @ 10.0V DC 1794-IE8 3.0 W @ 31.2V DC 1794-OE8 4.5 W @ 31.2V DC 4.0 W @ 31.2V DC Thermal dissipation, max. 1794-IE12 4.1 BTU/hr @ 31.2V DC 1794-OE12 4.7 BTU/hr @ 24V DC 1794-IE8XOE4 10.3 BTU/hr @ 31.2V DC 1794-IE8 10.2 BTU/hr @ 31.2V DC 1794-OE8 15.3 BTU/hr @ 31.2V DC 13.6 BTU/hr @ 31.2V DC Wire size – Power 0.34…2.5 mm2 (22…12 AWG) stranded copper wire rated at 75° C 167° F) or higher 4 mm2 (12 gauge) stranded, max – For 1794-IE8 and 1794-IE8XT only 1.2 mm (3/64 in.) insulation, max. Wire category(1) 2 – on signal port 2 – on power ports Terminal base screw torque 1794-TB3G and 1794-TB3GS 0379…1.02 N•m (7…9 lb-in.) 0.8 N•m (7 lb-in.) 1794-TBN 1.0 N•m (9 lb-in.) Enclosure type rating None (open-style) (1) Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1. Output Specifications – 1794-OE4, 1794-OE4XT, 1794-OE12, 1794-IE4XOE2, 1794-IE4XOE2XT, 1794-IE8XOE4 Specification 1794-IE12, 1794-OE12, 1794-IE8XOE4 1794-IE8, 1794-IE8XT, 1794-OE4, 1794-OE4XT,1794-IE4XOE2, 1794-IE4XOE2XT Publication 1794-UM062B-EN-P - March 2020 Specifications 49 Environmental Specifications The following are the environmental specifications common to all the FLEX I/O analog modules in this publication. Environmental Specifications Specification Description Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Test Bd, Operating Dry Heat), IEC 60068-2-14 (Test Nb, Operating Thermal Shock): 0…55 °C (32…131 °F) -20…+60 °C (-40…+185 °F) – For 1794-IE12, 1794-OE12 and 1794-IE8XOE4 only Temperature, nonoperating IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold), IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat), IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock): –40…85 °C (–40…185 °F) Relative humidity IEC 60068-2-30 (Test Db, Unpackaged Damp Heat): 5…95% noncondensing Vibration IEC 60068-2-6 (Test Fc, Operating): 5 g @ 10…500 H Shock, operating IEC60068-2-27 (Test Ea, Unpackaged shock): Operating 30 g Shock, nonoperating IEC60068-2-27 (Test Ea, Unpackaged shock): Nonoperating 50 g Emissions CISPR 11: Group 1, Class A ESD immunity IEC 61000-4-2: 6 kV contact discharges 4 kV contact discharges – For 1794-IE8, 1794-OE4, 1794-IE4XOE2 and 1794-IE4XOE2XT only 8 kV air discharges Radiated RF immunity 1794-IE12, 1794-OE12, 1794-IE8XOE4 IEC 61000-4-3: 10 V/m with 1 kHz sine-wave 80% AM from 30…2000 MHz 10 V/m with 200 Hz 50% pulse 100% AM at 900 MHz 10 V/m with 200 Hz 50% pulse 100% AM at 1890 MHz 3 V/m with 1 kHz sine-wave 80% AM from 2…2.7 GHz 1794-IE8, 1794-OE4, 1794-IE4XOE2 and 1794-IE4XOE2XT 10V/m with 1 kHz sine-wave 80%AM from 30MHz to 1000MHz EFT/B immunity IEC 61000-4-4: ±2 kV at 5 kHz on power ports – For 1794-IE12, 1794-OE12, 1794-IE8XOE4 only ±2 kV at 5 kHz on signal ports Publication 1794-UM062B-EN-P - March 2020 50 Specifications Certification The following are the certifications common to all the FLEX I/O analog modules in this publication. Conducted RF immunity 1794-IE12, 1794-OE12, 1794-IE8XOE4 IEC 61000-4-6: 10V/m with 1 kHz sine-wave 80%AM from 150 kHz…80 MHz 1794-IE8, 1794-OE4, 1794-IE4XOE2 and 1794-IE4XOE2XT IEC 61000-4-6: 10V/m with 1 kHz sine-wave 80%AM from 150 kHz…30 MHz Surge transient immunity IEC 6100-4-5: ±2 kV line-earth (CM) on shielded ports – For 1794-IE8, 1794-OE4, 1794-IE4XOE2 and 1794-IE4XOE2XT only Environmental Specifications Specification Description Certifications Certifications (when product is marked)(1) (1) 1) See the Product Certification link at www.ab.com for Declarations of Conformity, Certificates, and other certification details. Value c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584 UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810. CSA CSA certified Process Control Equipment CSA certified for Class 1, Division 2, Groups A, B, C and D Hazardous locations CE European Union 2004/108/EC EMC Directive, compliant with: EN 61326; Meas./Control/Lab., Industrial Requirements EN 61000-6-2; Industrial Immunity EN 61000-6-4; Industrial Emissions EN 50082-2; Industrial Immunity C-Tick Australian Radiocommunications Act, compliant with: AS/NZS CISPR 11; Industrial Emissions Ex European Union 94/9/EC ATEX Directive, compliant with: EN 60079-15;