3BHB003688R0101 This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics retains all intellectual property and other rights in or to the information contained herein, and such information may only be used in connection with the operation of your GAI-Tronics product or system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party. General Information The following GAI-Tronics amplifier enclosures are covered in this manual: Model Description 702-002 Indoor Amplifier Enclosure; single-party, 24 V dc input 732-102 Weatherproof Aluminum Amplifier Enclosure, single-party, 24 V dc input 733-002 Weatherproof Non-metallic Amplifier Enclosure, single-party, 24 V dc input The amplifier enclosure is an important component of the 700 Series Page/Party® system. The Model 702-002 Indoor Amplifier Enclosure is constructed of fabricated steel. The Model 732-102 Outdoor Enclosure is made of cast aluminum alloy, and the Model 733-002 Outdoor Enclosure is made of Valox®. Both outdoor enclosures are extremely weatherproof and corrosion-resistant. These enclosures are equipped with terminal strips for connecting inter-station cable. The 701 and 751 Series amplifiers mate directly with these enclosures. Installation CAUTION Do not install this equipment in hazardous areas or areas other than those indicated on the approval listing in the “Specifications” section of this manual. Such installation may cause a safety hazard and consequent injury or property damage. When installing an add-on station, consult the 24 V dc system layout diagrams at the end of this manual. These figures, when used in conjunction with the station installation information and cable layout guide, should provide all the information necessary to install additional Page/Party stations. Pub. 42004-147H Model 702-002, 732-102, and 733-002 24 V DC Single-Party Amplifier Enclosures Page 2 of 12 f:\standard ioms - current release\42004 instr. manuals\42004-147h.doc 08/13 In 24-volt systems, plan on several branch lines from the dc source with no more than six stations per branch. One branch could span up to 4,000 feet for a single station. The Maximum Cable Distance Table lists the limits. Where two or more stations are listed, the |
