BENTLY 3500-42M 176449-02模块备件

BENTLY 3500-42M 176449-02

对齐盖并将其滑上。
2.拧紧盖边缘周围的固定螺钉。
3.重新安装控制面板。
注意：必须关闭控制面板窗口以符合以下要求：
IP54。
1 2
64.安装驱动器
ACH550-01用户手册
重新安装防护罩（IP21）
1.对齐盖并将其滑上。
2.拧紧固定螺钉。
3.重新安装控制面板。
1 2
3.
安装驱动器65
ACH550-01用户手册
施加功率
警告！转动前，务必重新安装前盖
打开电源。
警告！ACH550将在通电时自动启动
如果外部运行命令在I/O时打开。
1.施加输入功率。
2.绿色LED亮起。
注意：在提高电机速度之前，检查电机是否正常工作
在期望的方向上运行。
注意：如果要生成故障以检查I/O，请选择
手动模式并卸下控制面板。
66安装驱动器
ACH550-01用户手册
下图显示了改变电机旋转方向，
从电机的轴端看。
注意：旋转方向可以从驱动装置改变，
但我们建议切换电机电缆，以关联
顺时针旋转电机，向前驱动。
注意：现在驱动器完全可用于手动操作。如果
要使用I/O连接，请参阅“应用程序”一章
宏和布线。
L1 L2 L3
M
L1 L2 L3
U1 V1 W1
M
W2U2V2 W2U2 V2
电机接线盒
U1 V1 W1
启动和控制面板67
ACH550-01用户手册
启动和控制面板
本章包含的内容
本章包含助理（HVAC）的简要说明
控制面板（操作员键盘）、启动助手和
应用程序选择。
控制面板兼容性
本手册与HVAC控制面板兼容
带有面板固件版本2.04或更高版本的ACH-CP-B版本X。
HVAC控制面板（ACH-CP-B）功能
ACH550 HVAC控制面板（操作员键盘）ACH-CP-B
特征：
•显示器的语言选择
•可随时进行或拆卸的驱动连接
•启动助理，以促进驱动器调试
•复制功能，用于将参数移动到其他ACH550驱动器
•用于保存参数集的备份功能
上
柔软的
关键1
向下
关
柔软的
关键2
帮助
手
自动
正常时为绿色，如果闪烁或
红色，请参阅屏幕上的诊断显示
第370页。
（始终可用）
状态LED
68启动和控制面板
ACH550-01用户手册
•上下文相关帮助
•实时时钟。
启动
启动可通过两种方式进行：
1.使用启动助手或
2.单独改变参数。
次通电时，驱动器会激活启动助手。
您可以在助手模式下重新启动它及其各个任务
如第76页“助手模式”一节所述。
1.使用th启动

BENTLY 3500-42M 176449-02

BENTLY 3500-42M 176449-02
Align the cover and slide it on. 2. Tighten the captive screws around the edge of the cover. 3. Re-install the control panel. Note: The control panel window must be closed to comply with IP54. 1 2 64 Installing the drive ACH550-01 User's Manual Re-install cover (IP21) 1. Align the cover and slide it on. 2. Tighten the captive screw. 3. Re-install the control panel. 1 2 3 Installing the drive 65 ACH550-01 User's Manual Apply power WARNING! Always re-install the front cover before turning power on. WARNING! The ACH550 will start up automatically at power-up if the external run command is on at I/O. 1. Apply input power. 2. Green LED is lit. Note: Before increasing motor speed, check that the motor is running in the desired direction. Note: If you want to generate a fault to check the I/O, select HAND mode and remove the control panel. 66 Installing the drive ACH550-01 User's Manual The figure below shows changing the direction of motor rotation, seen from the shaft end of the motor. Note: The direction of rotation can be changed from the drive, but we recommend switching the motor cables to associate the drive forward direction with the clockwise motor rotation. Note: Now the drive is fully operational for manual operation. If you wish to use I/O connections, refer to chapter Application macros and wiring. L1 L2 L3 M L1 L2 L3 U1 V1 W1 M W2 U2 V2 W2 U2 V2 Motor terminal box U1 V1 W1 Start-up and control panel 67 ACH550-01 User's Manual Start-up and control panel What this chapter contains This chapter contains a brief description of the assistant (HVAC) control panel (operator keypad), start-up assistant and application selection. Control panel compatibility The manual is compatible with the HVAC control panel ACH-CP-B Rev X with panel firmware version 2.04 or later. HVAC control panel (ACH-CP-B) features The ACH550 HVAC control panel (operator keypad) ACH-CP-B features: • language selection for the display • drive connection that can be made or detached at any time • start-up assistant to facilitate drive commissioning • copy function for moving parameters to other ACH550 drives • backup function for saving parameter sets UP SOFT KEY 1 DOWN OFF SOFT KEY 2 HELP HAND AUTO Green when normal, if flashing or red, see Diagnostics displays on page 370. (always available) Status LED 68 Start-up and control panel ACH550-01 User's Manual • context sensitive help • real-time clock. Start-up Start-up can be performed in two ways: 1. using the Start-up assistant or 2. changing the parameters individually. At the first power-up, the drive activates the Start-up assistant. You can restart it and its individual tasks in the Assistants mode as described in section Assistants mode on page 76. 1. Start-up by using th