MVME172-253A3模块备件

MVME172-253A

将您的开发时间线移动到高速档，并
使用此应用程序，缩短上市时间
Elma的站台。
描述
这是一个完全集成的6U VME64x应用程序开发平台
采用艾默生网络电源公司新的VME板；这个
MVME7100单板计算机，采用MPC8641双核
具有2eSST VMEbusr接口的处理器，该接口结合了
这对性能的提高意义重大。MVME7100 SystemPak
提供强大的预配置子系统，用于迁移当前
VMEbus应用程序采用新的PowerPC技术或
快速开发和部署新应用程序。它提供
与传统系统相比提高了性能和功能，同时
保护传统VMEbus相关技术投资。
支持此处理器卡的是PMC SATA存储模块，具有：
640GB或以上（查询更高的可用容量）的旋转硬盘
驱动器容量可满足应用程序数据存储要求。
12端口前面板、千兆以太网交换机和路由引擎
提供网络带宽和配置能力
这是处理大多数应用程序开发需求所必需的。
强大的有效载荷位于业界受欢迎的塔中
具有500W电源。方便的携带手柄允许：
轻松传输此桌面系统。
该子系统加载了VxWorks启动映像和运行时
许可证，并在装运前进行全面测试。一系列组件
选项允许用户确认设计用于满足以下要求的系统：
具体要求。有关机箱和有效负载选项的列表，请参阅
配置选项。
标准配置包括：
S32V6NP4NPCXNVN-711是一款可随时运行的装置，具有：
•单板计算机-MVME7100-0163型
•以太网交换机-T4001a-740型
•SATA PMCDisk-型号9262G-640GB-54-SD
•32型底盘–32V05OPX48Y3VGE0型
•VxWorks启动映像、运行时许可证和驱动程序集
TVME7100 SystemPak
应用程序就绪开发平台
ACT/Technico嵌入式计算产品品牌TM
以太网交换机
底盘
设计&
文档
软件
输入/输出
SBCs
TVME7100 SystemPak
标准配置组件
单板计算机：
MVME7100-0163
•片上系统飞思卡尔
1GHz MPC8641D，带双
PowerPC®e600处理器
核心，双集成
存储器控制器
引擎，PCI Express
接口、以太网和本地I/O
•两GB的DDR2 ECC
内存，128MB Nor fl ash
GB与非荧光粉
•四个千兆以太网端口
•USB 2.0控制器
•2eSST VMEbus协议提供
与MVME6100的互操作性
以及更高带宽的MVME3100
•通过XMC或PMC扩展的双33/66/100MHz PMC-X站点
模块（支持PrPMC）
•用于PMC-X和XMC扩展的8x PCI Express连接器，使用
艾默生XMCSpan
•RS232前面板串行端口
•VxWorks启动映像、运行时许可证和驱动程序集
•IEEE手柄
以太网交换机/第3层路由引擎：T4001a-740型
•12个10/100/1000前面板铜RJ45端口
•完全管理的第2层交换和第3层路由
•全线速运行
•自动协商、自动交叉和自动极性
•每个端口有八个优先级队列级别
•每个流量等级的小带宽保证
存储：型号9262G-640GB-54-SD SATA PMCDisk
•安装在PMC模块上的640GB 2.5“SATA旋转硬盘驱动器
在MVME7100 SBC上
•非常适合高容量、高带宽数据存储需求
•PCI680芯片组支持UDMA-6 ATA，传输速率为133 MB/秒
•适用于任何符合行业标准的单板计算机
IEEE P1386.1 PMC站点
•包括设备驱动程序
便携式塔：型号32V05OPX48Y3VGE0
•32型便携式机箱
•5个VME64X插槽背板–垂直方向
•气流：前下进气口/后上排气口
•500W电源，一个插入式电源，带+5V@50A,
+3.3V@60A, +12V@12A, -12V@4A位于PS插槽6中的输出
和7
•交流输入：带PFC的85-264VAC输入
•尺寸为4U宽，长17英寸，宽13.38英寸（不包括手柄）
•嵌入式前卡盒和嵌入式后卡盒（后卡盒为80mm
可选转换模块）
•卡笼下方的12VDC风扇
•前下部至后上部空气流量
•机箱后部的开/关开关、交流输入/滤波器/保险丝
•用于未使用插槽的空气阻断器
环境规范的标准配置
温度：0°C至+50°C工作温度
-20°C至+70°C储存温度
湿度：5%至95%非冷凝运行和
存储
冲击：11ms时为5 Gs，运行
11ms条件下的10g（根据ASTM 0775）储存
振动：10至33时为1.0 Gs

MVME172-253A

MVME172-253A

Move your development time line into high gear and reduce your time to market with this application ready platform from Elma. Description This fully integrated 6U VME64x application development platform features the newest VME board from Emerson Network Power; the MVME7100 single board computer featuring the MPC8641 dual core processor with a 2eSST VMEbusr interface which combined offer signifi cant performance improvement. The MVME7100 SystemPak provides a powerful pre-confi gured subsystem for migrating current VMEbus applications to the latest in PowerPC technology or for rapid development and deployment of new applications. It offers increased performance and features over legacy systems while protecting legacy VMEbus related technology investments. Supporting this processor card is a PMC SATA storage module with 640GB or more (inquire about higher available capacities) of rotating drive capacity ready to meet application data storage requirements. A 12-port front panel Gigabit Ethernet switch and routing engine provides the network bandwidth and confi guration capability necessary to handle most application development needs. The powerful, payload resides in the industry’s most popular tower featuring a 500W power supply. A convenient carrying handle allows easy transport of this desktop system. The subsystem is loaded with a VxWorks boot image and run time license and fully tested prior to shipment. A range of component options allows users to confi gure a system designed to meet specifi c requirements. For a list of chassis and payload options see Confi guration Options. Standard Confi guration Includes: The S32V6NP4NPCXNVN-711 comes as a ready to run unit with: • Single board computer - model MVME7100-0163 • Ethernet switch - model T4001a-740 • SATA PMCDisk - model 9262G-640GB-54-SD • Type 32 chassis – model 32V05OPX48Y3VGE0 • VxWorks boot image, run time license and driver set TVME7100 SystemPak Appplication Ready Development Platform ACT/Technico brand of Embedded Computing Products TM Ethernet Switches Chassis Design & Documentation Software I/O SBCs TVME7100 SystemPak Standard Confi guration Components Single Board Computer: MVME7100-0163 • System-on-chip Freescale 1GHz MPC8641D with dual PowerPC® e600 processor cores, dual integrated memory controllers, DMA engine, PCI Express interface, Ethernet, and local I/O • Two GB of DDR2 ECC memory, 128MB Nor fl ash GB Nand fl ash • Four Gigabit Ethernet ports • USB 2.0 controller • 2eSST VMEbus protocol offers interoperability with MVME6100 and MVME3100 at higher bandwidths • Dual 33/66/100MHz PMC-X sites for expansion via XMC or PMC modules (supports PrPMC) • 8x PCI Express connector for PMC-X and XMC expansion using Emerson XMCSpan • RS232 front panel serial port • VxWorks boot image, run time license and driver set • IEEE handles Ethernet Switch / Layer 3 Routing Engine: Model T4001a-740 • Twelve 10/100/1000 front panel copper RJ45 ports • Fully managed, Layer 2 switching and Layer 3 routing • Full wire speed operation • Auto negotiation, auto crossover and auto polarity • Eight priority queue levels per port • Minimal bandwidth guarantee per traffi c class Storage: Model 9262G-640GB-54-SD SATA PMCDisk • 640GB 2.5” SATA rotating hard drive on a PMC module mounted on the MVME7100 SBC • Ideal for high capacity, high bandwidth data storage requirements • PCI680 chipset supports UDMA-6 ATA, 133 MB/sec transfer rates • Suitable for any Single Board Computer with an industry standard IEEE P1386.1 PMC site • Device driver included Portable Tower: Model 32V05OPX48Y3VGE0 • Type 32 portable chassis • 5 VME64X slot backplane – vertical orientation • Airfl ow: lower front air intake / top rear exhaust • 500W Power One Plug in power supply with +5V@50A, +3.3V@60A, +12V@12A, -12V@4A outputs located in PS slots 6 and 7 • AC input 85-264VAC input with PFC • Measures 4U wide by 17”H x 13.38”D (excluding handles) • Flush front card cage and fl ush rear card cage (80mm for rear optional transition module) • 12VDC fan below card cage • Lower front-to-upper rear airfl ow • On/Off switch, AC inlet/fi lter/fuses in rear of chassis • Air blockers for unused slots Standard Confi guration Environmental Specifi cations Temperature: 0°C to +50°C operating -20°C to +70°C storage Humidity: 5% to 95% non-condensing operating and storage Shock: 5 Gs @ 11ms, operating 10 Gs @ 11ms (per ASTM 0775) storage Vibration: 1.0 Gs @ 10 to 33