Woodward 5415-816模块备件

Woodward 5415-816

训练指导员的职责，海军陆战队的58%和60%
招募人员职责，海军陆战队服役的比例分别为18%和16.7%
海上保安和警卫分别负责。这些百分比保持不变
根据海军陆战队的需要进行更改。节目
已成立，以提供秀晋升至中士的机会
下士在训练指导和招募任务。指挥
海军陆战队新兵基地将军，帕里斯岛/东部新兵
地区和圣地亚哥/西部招聘地区被授权：
根据客户的需求，有价值地提升一定比例的下士
海军陆战队。
c、 熟练度工资
（1） 海军陆战队被指定为演习指导员（钢坯MOS 8511），
招募人员（钢坯MOS 8411/8412）和海上保安（钢坯莫斯
8151）是根据参考（d）授权的特殊任务分配（SDA）付款。
BMOS初始
8411/8412 $375.00
8511 $275.00
8151（仅限味精）$110.00
（2） 熟练度薪酬根据海军陆战队的独特要求进行调整
为了完成他们的工作，他们必须处理这些问题。其不旨在
表示一项职责比另一项职责更重要。（即招聘人员：
作为我们的客户，需要保持高标准的专业外观
公众面前的代表，但他们也在监狱里服务
这些活动通常与我们开展的所有传统支持活动相隔离
依靠我们的基地，如住房、小卖部和交易所。）
d、 选择性重新列名奖金（SRB）。某些钢坯贯穿整个过程
海军陆战队允许海军陆战队保留其SRB资格，即使：
他们在其主要军事职业专业之外服役。
以下特殊任务允许海军陆战队保留其SRB：
MOS标题
8151防护罩
8152海军陆战队保安部队警卫
8153海军陆战队安全部队干部培训师
8154海军陆战队安全部队近距离战斗队
成员
8411招聘人员
8511训练指导员
e、 丝带。作为一名海军陆战队队员成功完成了一次巡演
培训讲师（至少30个月），招聘人员（30个月
至少）或海上保安（至少24个月）有权：
1-4
斯达曼
戴着代表他们的丝带
一端为阳销，另一端为阴销。
连接舱壁和双端的指南
电缆
连接隔板和标准电缆的指南如下：
•标准连接器只能连接到隔板
连接器或460V-1326Ax电机。
•隔板连接器只能连接到标准连接器
连接器。
•将隔板连接到标准连接器时，一个
接头必须有阳插脚，另一个必须有
母销。
•尽管可以连接指定为L选项的电缆
对于没有此选项的电缆或电机，结果
连接将不具有L选项。
•电缆敷设长度不得超过90米。
安装直角连接器电缆
直角接头采用键连接，以确保方向正确。这个
以直角连接的1326根电缆的方向
与电机轴相关的接头如下所示：
AB
艾伦布拉德利律师事务所
标准舱壁
1326 xxx RA xxx和1326 xxx RAL xxx
电缆通向电机轴

Woodward 5415-816

Woodward 5415-816

drill instructor duty, 58 percent and 60 percent for Marines serving on
recruiter duty, and 18 percent and 16.7 percent for Marines serving on
Marine Security Guard duty, respectively. These percentages remain
subject to change according to the needs of the Marine Corps. A program
has been established to provide for meritorious promotions to Sergeant for
Corporals on Drill Instructor and Recruiting Duty. The Commanding
Generals, Marine Corps Recruit Depot, Parris Island/Eastern Recruiting
Region and San Diego/Western Recruiting Region are delegated authority to
meritoriously promote a percentage of Corporals based on the needs of the
Marine Corps.
 c. Proficiency Pay
 (1) Marines assigned as drill instructors (billet MOS 8511),
recruiters (billet MOS 8411/8412), and Marine Security Guards (billet MOS
8151) are authorized Special Duty Assignment (SDA) pay per reference (d).
 BMOS Initial
 8411/8412 $375.00
 8511 $275.00
 8151 (MSG only) $110.00
 (2) Proficiency pay is scaled to the unique requirements Marines
must deal with in order to perform their job. It is not intended to
signify that one duty is more important than another. (i.e. Recruiters are
required to maintain a high standard of professional appearance as our
representatives before the general public, but they also serve in billets
which are usually isolated from all the traditional support activities we
rely on aboard our Bases, such as housing, commissaries and exchanges.)
 d. Selective Reenlistment Bonus (SRB). Certain billets throughout
the Marine Corps allow Marines to retain their SRB eligibility even though
they are serving outside of their primary military occupational specialty.
The following special duty assignments allow Marines to retain their SRB:
 MOS TITLE
 8151 Guard
 8152 Marine Corps Security Force Guard
 8153 Marine Corps Security Force Cadre Trainer
 8154 Marine Corps Security Force Close Quarters Battle Team
 Member
 8411 Recruiter
 8511 Drill Instructor
 e. Ribbons. Marines who have successfully completed a tour as a
Drill Instructor (30 months minimum), Recruiter (30 months
minimum), or Marine Security Guard (24 months minimum) are entitled
1-4
 SDAMAN
to wear a ribbon representing ts have
male pins on one end and female pins on the other end.
Guidelines for Connecting Bulkhead and Double-Ended
Cables
The guidelines for connecting bulkhead and standard cables are:
• A standard connector can only connect to a bulkhead
connector or a 460V-1326Ax motor.
• A bulkhead connector can only connect to a standard
connector.
• When connecting a bulkhead to a standard connector, one
connector must have male pins and the other must have
female pins.
• Though cables designated with the L option can be connected
to cables or motors without this option, the resulting
connection will not have the L option.
• The length of a cable run cannot exceed 90 meters.
Installing Right-Angle Connector Cables
Right-angle connectors are keyed for correct orientation. The
orientation of the 1326 cables attached with right-angle
connectors in relation to the motor shaft is shown below:
AB
AB ALLEN-BRADLEY
Standard Bulkhead
1326-xxx-RA-xxx and 1326-xxx-RAL-xxx
 cables exit towards the motor shaft