




Woodward 5464-331
这是安全警报符号。它用于提醒您潜在的个人信息
伤害危险。遵守此符号后面的所有安全信息,以避免:
可能的伤害或死亡。
危险表示危险情况,如果不避免,将导致死亡
或严重受伤。
警告表示危险情况,如果不避免,可能导致
死亡或重伤。
警告表示危险情况,如果不避免,可能导致:
轻微或中度伤害。
注意:表示仅可能导致财产损失的危险(包括:
对控制装置的损坏)。
重要:指定操作提示或维护建议。
发动机、涡轮机或其他类型的原动机应配备
超速停机装置,防止主泵失控或损坏
可能造成人身伤害、生命损失或财产损失的搬运工。
超速停机装置必须完全独立于原动机
控制系统。超温或超压停机装置也可能:
为安全起见,视情况而定。
阅读本手册以及与之前执行的工作相关的所有其他出版物
安装、操作或维护本设备。执行所有设备和安全说明,以及
注意事项。不遵守说明可能导致人身伤害和/或财产损失。
本出版物可能在本副本制作后进行了修订或更新。核实
您有新版本,请务必查看伍德沃德网站:
www.woodward.com/pubs/current.pdf
修订级别显示在出版物编号后的封面底部。新的
大多数出版物的版本可从以下网址获得:
www.woodward.com/publications
如果您的出版物不在,请联系您的客户服务代表以获取
这是新的一份。
任何未经授权的对本设备的修改或使用,超出其规定的机械范围,
电气或其他操作限制可能导致人身伤害和/或财产损失,包括
设备损坏。任何此类未经授权的修改:(i)构成“滥用”和/或
产品保修范围内的“疏忽”,因此不包括保修范围
以及(ii)使产品认证或清单失效。
防止损坏使用交流发电机或蓄电池充电的控制系统
设备,确保在断开电池之前关闭充电设备
来自系统。
为防止因操作不当而损坏电子部件,请阅读
并遵守伍德沃德手册82715《操作指南》中的注意事项,以及
电子控制、印刷电路板和模块的保护
Woodward 5464-331

Woodward 5464-331
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. DANGER—Indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING—Indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION—Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. NOTICE—Indicates a hazard that could result in property damage only (including damage to the control). IMPORTANT—Designates an operating tip or maintenance suggestion. The engine, turbine, or other type of prime mover should be equipped with an overspeed shutdown device to protect against runaway or damage to the prime mover with possible personal injury, loss of life, or property damage. The overspeed shutdown device must be totally independent of the prime mover control system. An overtemperature or overpressure shutdown device may also be needed for safety, as appropriate. Read this entire manual and all other publications pertaining to the work to be performed before installing, operating, or servicing this equipment. Practice all plant and safety instructions and precautions. Failure to follow instructions can cause personal injury and/or property damage. This publication may have been revised or updated since this copy was produced. To verify that you have the latest revision, be sure to check the Woodward website: www.woodward.com/pubs/current.pdf The revision level is shown at the bottom of the front cover after the publication number. The latest version of most publications is available at: www.woodward.com/publications If your publication is not there, please contact your customer service representative to get the latest copy. Any unauthorized modifications to or use of this equipment outside its specified mechanical, electrical, or other operating limits may cause personal injury and/or property damage, including damage to the equipment. Any such unauthorized modifications: (i) constitute "misuse" and/or "negligence" within the meaning of the product warranty thereby excluding warranty coverage for any resulting damage, and (ii) invalidate product certifications or listings. To prevent damage to a control system that uses an alternator or battery-charging device, make sure the charging device is turned off before disconnecting the battery from the system. To prevent damage to electronic components caused by improper handling, read and observe the precautions in Woodward manual 82715, Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, and Modules
Copyright ©2019-2022 瑞昌明盛自动化设备有限公司 版权所有 赣ICP备2021006016号