Woodward 8236-026模块现货

Woodward 8236-026

FL MGUARD通过组合以下功能来保护IP数据连接：
–网卡（FL MGUARD PCI4000）
–VPN路由器（VPN-虚拟专用网络），用于通过公共网络进行安全数据传输
网络（基于硬件的DES、3DES和AES加密、IPsec协议）。
–可配置防火墙，防止未经授权的访问。动态数据包
筛选器使用源和目标地址和块检查数据包
不希望的数据流量。
可以使用web浏览器轻松配置设备。
网络功能–隐形（自动、静态、多）、路由器（静态、DHCP客户端）、PPPoE（用于DSL）、PPTP（用于
DSL）和调制解调器
–VLAN
–内部和外部网络接口上的DHCP服务器/中继
–内部网络接口上的DNS缓存
–通过HTTPS和SSH进行管理
–DSCP/TOS值的可选转换（服务质量）
–服务质量（QoS）
–LLDP
–MAU管理
–SNMP
防火墙功能-有状态数据包检查
–反欺骗
–IP过滤器
–L2过滤器（仅在隐身模式下）
–支持FTP、IRC和PPTP的NAT（仅在路由器模式下）
–1:1 NAT（仅在路由器网络模式下）
–端口转发（不在隐形网络模式下）
–不同用户的单独防火墙规则（用户防火墙）
–作为防火墙规则（用户防火墙或VPN除外）的操作（目标）的单个规则集
防火墙）
防病毒功能–针对特定文件类型（例如。，
可执行文件）
–防病毒扫描连接器，支持网络驱动器的中央监控
病毒扫描器
有关更多信息，请访问菲尼克斯电气公司网站：
phoenixcontact.net/products
FL MGUARD
10菲尼克斯电气8334_en_02
VPN功能–协议：IPsec（隧道和传输模式）
–使用DES（56位）、3DES（168位）和AES（128位、192位）在硬件中进行IPsec加密，
256位）
–数据包身份验证：MD5，SHA-1
–具有主模式和快速模式的互联网密钥交换（IKE）
–通过以下方式进行身份验证：
–预共享密钥（PSK）
–X.509v3证书，带有证书颁发机构的公钥基础设施（PKI）
（CA）、可选证书撤销列表（CRL）和按主题筛选的选项
或
–合作伙伴证书，例如自签名证书
–通过DynDNS检测合作伙伴IP地址的变化
–NAT穿越（NAT-T）
–死点检测（DPD）：检测到IPsec连接中止
–IPsec/L2TP服务器：连接IPsec/L2TP客户端
–IPsec防火墙和1:1 NAT
–VPN上的默认路由
–VPN之间的数据转发（集线器和分支）
–根据许可证：多250个VPN信道
–VPN中加密的硬件加速
其他功能–远程日志记录
–路由器/防火墙冗余（可以稍后为每个许可证安装，而不是为固件安装
版本7.0））
–使用SNMP v1-v3和FL MGUARD设备管理器（FL MGUARD）进行管理
DM）
–对HTTPS/SSH远程访问的PKI支持
–可以通过LAN接口充当NTP和DNS服务器
支持
有关设备和发行说明的其他信息：说明和软件更新可在互联网上找到：phoenixcontact.net/products。
介绍
8334_en_02菲尼克斯电气11
1.1设备版本
FL MGUARD有以下设备版本，它们基本相同
功能。无论处理器技术和操作如何，都可以使用所有设备
连接的计算机使用的系统。
FL MGUARD RS4000/
FL MGUARD RS2000
FL MGUARD RS4000是一款具有智能防火墙和可选IPsec的安全路由器
VPN（10至250个隧道）。它被设计用于工业，以适应严格的
分布式安全和高可用性要求。
FL MGUARD RS2000是一个具有基本防火墙和集成IPsec VPN的版本
（多两条隧道）。它的功能范围被缩小到基本的范围。它是合适的
用于安全远程维护

Woodward 8236-026

Woodward 8236-026

The FL MGUARD protects IP data connections by combining the following functions: – Network card (FL MGUARD PCI4000) – VPN router (VPN - Virtual Private Network) for secure data transmission via public networks (hardware-based DES, 3DES, and AES encryption, IPsec protocol). – Configurable firewall for protection against unauthorized access. The dynamic packet filter inspects data packets using the source and destination address and blocks undesired data traffic. The device can be configured easily using a web browser. Network features – Stealth (auto, static, multi), router (static, DHCP client), PPPoE (for DSL), PPTP (for DSL), and modem – VLAN – DHCP server/relay on the internal and external network interfaces – DNS cache on the internal network interface – Administration via HTTPS and SSH – Optional conversion of DSCP/TOS values (Quality of Service) – Quality of Service (QoS) – LLDP – MAU management – SNMP Firewall features – Stateful packet inspection – Anti-spoofing – IP filter – L2 filter (only in stealth mode) – NAT with FTP, IRC, and PPTP support (only in router modes) – 1:1 NAT (only in router network mode) – Port forwarding (not in stealth network mode) – Individual firewall rules for different users (user firewall) – Individual rule sets as action (target) of firewall rules (apart from user firewall or VPN firewall) Anti-virus features – CIFS integrity check of network drives for changes to specific file types (e.g., executable files) – Anti-virus scan connector which supports central monitoring of network drives with virus scanners Further information can be found on the Phoenix Contact website at: phoenixcontact.net/products FL MGUARD 10 PHOENIX CONTACT 8334_en_02 VPN features – Protocol: IPsec (tunnel and transport mode) – IPsec encryption in hardware with DES (56 bits), 3DES (168 bits), and AES (128, 192, 256 bits) – Packet authentication: MD5, SHA-1 – Internet Key Exchange (IKE) with main and quick mode – Authentication via: – Pre-shared key (PSK) – X.509v3 certificates with public key infrastructure (PKI) with certification authority (CA), optional certificate revocation list (CRL), and the option of filtering by subject or – Partner certificate, e.g., self-signed certificates – Detection of changing partner IP addresses via DynDNS – NAT traversal (NAT-T) – Dead Peer Detection (DPD): detection of IPsec connection aborts – IPsec/L2TP server: connection of IPsec/L2TP clients – IPsec firewall and 1:1 NAT – Default route over VPN – Data forwarding between VPNs (hub and spoke) – Depending on the license: up to 250 VPN channels – Hardware acceleration for encryption in the VPN Additional features – Remote logging – Router/firewall redundancy (can be installed later for each license, not for firmware version 7.0)) – Administration using SNMP v1-v3 and FL MGUARD device manager (FL MGUARD DM) – PKI support for HTTPS/SSH remote access – Can act as an NTP and DNS server via the LAN interface Support Additional information on the device as well as on release NOTE: notes and software updates can be found on the Internet at: phoenixcontact.net/products. Introduction 8334_en_02 PHOENIX CONTACT 11 1.1 Device versions The FL MGUARD is available in the following device versions, which largely have identical functions. All devices can be used regardless of the processor technology and operating system used by the connected computers. FL MGUARD RS4000/ FL MGUARD RS2000 The FL MGUARD RS4000 is a security router with intelligent firewall and optional IPsec VPN (10 to 250 tunnels). It has been designed for use in industry to accommodate strict distributed security and high availability requirements. The FL MGUARD RS2000 is a version with basic firewall and integrated IPsec VPN (maximum of two tunnels). Its scope of functions is reduced to the essentials. It is suitable for secure remote maint