Woodward 8280-071模块现货

Woodward 8280-071

为了确保正确操作以及环境和人员的安全，FL
必须正确安装、操作和维护MGUARD。
还请注意以下章节中设备的附加安全注意事项。
关于使用的一般说明
警告：预期用途
仅以适当的方式使用FL MGUARD，并将其用于预期目的。
警告：仅将LAN安装连接到RJ45插座
仅将FL MGUARD网络端口连接到LAN安装。一些电信连接也使用RJ45插座；不得将其连接到FL MGUARD的RJ45插座。
注：连接说明
–使用时，您的电脑上必须有一个免费的PCI插槽（3.3 V或5 V）
FL MGUARD PCI4000。
–不要弯曲连接电缆。仅使用网络连接器连接到
网络。
注：选择合适的环境条件
–环境温度：
0°C…+40°C（FL-MGUARD SMART2、FL-MGUARD DELTA TX/TX）
0°C…+60°C（带电池的FL MGUARD PCI4000）
0°C…+70°C（无电池的FL MGUARD PCI4000）
-20°C…+60°C（FL MGUARD RS4000/FL MGUARD RS2000）
–大湿度，无冷凝
20%…90%（FL MGUARD SMART2）
5%…95%，
FL-MGUARD-DELTA-TX/TX）
为避免过热，请勿暴露在阳光直射或其他热源下。
注：清洁
用软布清洁设备外壳。不要使用研磨性溶剂。
产品名称
18菲尼克斯电气8334_en_02
启动步骤
要启动设备，请按指定顺序执行以下步骤：
步骤目标页面
1.检查供货范围
阅读发行说明
19页
2.连接设备
FL MGUARD RS4000/FL MGUARD RS200020页
FL MGUARD PCI400025页
FL MGUARD DELTA TX/TX28页
3如果需要，配置设备。
通过提供的单个菜单选项进行操作
FL MGUARD配置界面。
阅读本用户手册中的说明，以确定：
您的操作需要或需要哪些设置
环境
30页
启动
8334_en_02菲尼克斯电气19
3.2检查供应范围
启动前，检查供应范围，确保无遗漏。
供应范围包括：
–FL MGUARD RS4000、FL MGUARD RS2000、FL MGUARD SMART2，
FL MGUARD PCI4000，FL MGUARD DELTA TX/TX设备
–装箱单
FL MGUARD RS4000和FL MGUARD RS2000还包括：
–用于电源连接和输入/输出的COMBICON插件连接器（插入）
FL MGUARD DELTA TX/TX还包括：
–12 V直流电源，包括不同国家/地区的适配器

Woodward 8280-071

Woodward 8280-071

To ensure correct operation and the safety of the environment and of personnel, the FL MGUARD must be installed, operated, and maintained correctly. Please also note the additional safety notes for the device in the following sections. General notes regarding usage WARNING: Intended use Only use the FL MGUARD in an appropriate way and for its intended purpose. WARNING: Only connect LAN installations to RJ45 sockets Only connect the FL MGUARD network ports to LAN installations. Some telecommunications connections also use RJ45 sockets; these must not be connected to the RJ45 sockets of the FL MGUARD. NOTE: Connection notes – A free PCI slot (3.3 V or 5 V) must be available on your PC when using the FL MGUARD PCI4000. – Do not bend the connecting cable. Only use the network connector for connection to a network. NOTE: Select suitable ambient conditions – Ambient temperature: 0°C ... +40°C (FL MGUARD SMART2, FL MGUARD DELTA TX/TX) 0°C ... +60°C (FL MGUARD PCI4000 with battery) 0°C ... +70°C (FL MGUARD PCI4000 without battery) -20°C ... +60°C (FL MGUARD RS4000/FL MGUARD RS2000) – Maximum humidity, non-condensing 20% ... 90%(FL MGUARD SMART2) 5% ... 95%, (FL MGUARD RS4000/FL MGUARD RS2000, FL MGUARD PCI4000, FL MGUARD DELTA TX/TX) To avoid overheating, do not expose to direct sunlight or other heat sources. NOTE: Cleaning Clean the device housing with a soft cloth. Do not use abrasive solvents. Product designation 18 PHOENIX CONTACT 8334_en_02 Steps for startup To start up the device, carry out the following steps in the specified order: Step Aim Page 1 Check the scope of supply Read the release notes Page 19 2 Connect the device FL MGUARD RS4000/FL MGUARD RS2000 Page 20 FL MGUARD PCI4000 Page 25 FL MGUARD DELTA TX/TX Page 28 3 Configure the device, if required. Work through the individual menu options offered by the FL MGUARD configuration interface. Read the explanations in this user manual in order to determine which settings are necessary or desirable for your operating environment Page 30 Startup 8334_en_02 PHOENIX CONTACT 19 3.2 Checking the scope of supply Before startup, check the scope of supply to ensure nothing is missing. The scope of supply includes: – The FL MGUARD RS4000, FL MGUARD RS2000, FL MGUARD SMART2, FL MGUARD PCI4000, FL MGUARD DELTA TX/TX device – Packing slip The FL MGUARD RS4000 and FL MGUARD RS2000 also include: – COMBICON plug-in connector for the power supply connection and inputs/outputs (inserted) The FL MGUARD DELTA TX/TX also includes: – 12 V DC power supply including different country adapters