Woodward 9904-263模块备件

Woodward 9904-263

欧洲共同体（EC）指令合规性
如果本产品具有CE标志，则批准在
欧盟和欧洲经济区区域。其设计和测试旨在：
满足以下指令。
EMC指令
本产品经测试符合理事会指令89/336/EC
通过应用以下各项实现电磁兼容性（EMC）：
技术施工文件中记录的全部或部分标准：
•EN 50081-2电磁兼容性-通用排放标准，第2部分-
工业环境
•EN 5001082-2 EMC-通用抗扰度标准，第2部分-
工业环境
本产品适用于工业环境。
低压指令
本产品经测试符合理事会指令73/23/EEC低压，
通过应用EN 61131-2的安全要求，可编程
控制器，第2部分：设备要求和试验。这个设备
属于开放式设备，必须安装在外壳中
在操作期间提供安全保护。
4.ControlNet PCI通信接口卡
9904-IN002A-US-P-2000年3月
处理卡片
采取以下预防措施以防止ESD损坏：
•在处理卡之前，触摸接地物体进行放电
以及累积的静电荷。
•避免接触背板连接器或接口连接器引脚
位于卡上。
•如果卡不在使用中，将其存储在防静电翻盖中
信用卡已运入。
重要提示：请记住，断开交流电源的计算机不是
接地物体。
!
注意：该卡采用CMOS技术，高度
对静电放电（ESD）敏感。可能存在ESD
当你处理卡片的时候。当你处理卡片时
任何可能导致内部电路损坏的ESD保护
在您安装或初使用该卡时不明显。

Woodward 9904-263

Woodward 9904-263

European Communities (EC) Directive Compliance If this product has the CE mark it is approved for installation within the European Union and EEA regions. It has been designed and tested to meet the following directives. EMC Directive This product is tested to meet the Council Directive 89/336/EC Electromagnetic Compatibility (EMC) by applying the following standards, in whole or in part, documented in a technical construction file: • EN 50081-2 EMC — Generic Emission Standard, Part 2 — Industrial Environment • EN 5001082-2 EMC — Generic Immunity Standard, Part 2 — Industrial Environment This product is intended for use in an industrial environment. Low Voltage Directive This product is tested to meet Council Directive 73/23/EEC Low Voltage, by applying the safety requirements of EN 61131-2 Programmable Controllers, Part 2 - Equipment Requirements and Tests. This equipment is classified as open equipment and must be mounted in an enclosure during operation to provide safety protection. 4 ControlNet PCI Communication Interface Card 9904-IN002A-US-P - March 2000 Handling the Card Take these precautions to guard against ESD damage: • Before you handle the card, touch a grounded object to discharge and built-up static charge. • Avoid touching the backplane connector or interface connector pins located on the card. • If the card is not in use, store it in the anti-static clamshell that the card was shipped in. Important:Remember, a computer with ac power disconnected is not a grounded object. ! ATTENTION: The card uses CMOS technology, which is highly sensitive to electrostatic discharge (ESD). ESD may be present whenever you handle the card. When you handle the card without any ESD protection you can cause internal circuit damage that may not be apparent when you install or initially use the card.