1C31234G01模块备件

1C31234G01

AUI电缆连接单元接口（AUI）电缆，用于将PCRR卡连接到
远程I/O应用中的MAU模块。
A侧是指当
接线板或AUI电缆连接器面向观察者。
B侧是指当
接线板或AUI电缆连接器面向观察者。
基座单元由印刷电路板、各种连接器和塑料外壳组成。它
为用户提供连接现场接线的机制，并连接现场
输入/输出模块的信号。该装置使I/O模块能够接收电力，以及
还提供低阻抗接地连接。
每个标准基本单元可以容纳两组I/O模块，以及
相关的现场布线。继电器输出基本单元包含一个电子设备
单元
在DIN导轨上连续配置的基本单元的分支集，本地总线为：
连接到I/O控制器。
电子模块：I/O模块的一部分，提供带有相关透镜的塑料外壳
以及标签。它包含多两个印刷电路板（逻辑板和
现场板），提供与现场设备接口所需的电子设备
具有I/O控制器。
网络和I/O之间的I/O控制器接口。控制器位于
Ovation I/O机柜（机柜在U3-1000和U3-1005中描述）。
IOIC卡控制器PCI I/O接口卡的通用名称。选项是PCQL，
PCRL、PCRR。
I/O模块：标准I/O模件由电子模块和个性模块组成
单元紧凑型模块和继电器输出模块不包含
个性模块。这些模块执行I/O之间的接口
控制器和现场设备。
MAU媒体附件单元（MAU）是附件单元的替代名称
并包括电子模块和个性模块的组合。
在远程I/O应用中，该设备将PCRR卡（通过AUI电缆）连接到RNC（通过光纤电缆）。
用于将Ovation控制器连接到WDPF Q线I/O的迁移过程。

1C31234G01

1C31234G01

AUI Cable Attachment Unit Interface (AUI) Cable that interfaces the PCRR card to the MAU module in remote I/O applications. A Side Refers to the left side board-to-board connector of the base unit when the terminal block or AUI Cable connector is facing the viewer. B Side Refers to the right side board-to-board connector of the base unit when the terminal block or AUI Cable connector is facing the viewer. Base Unit Consists of a printed circuit board, various connectors, and plastic housing. It provides a mechanism for the user to land field wiring, and connects the field signals to the I/O module. The unit enables the I/O module to receive power, and also provides a low-impedance earth ground connection. Each standard base unit can house two sets of I/O modules, along with the associated field wiring. The Relay Output base unit houses one Electronics module. Branch Set of base units configured consecutively on a DIN rail with a local bus being connected to the I/O Controller. Electronics Module Portion of an I/O module that provides a plastic housing with associated lenses and labelling. It contains up to two printed circuit boards (the logic board and field board) that provide the electronics necessary to interface the field devices with the I/O Controller. I/O Controller Interface between the Network and the I/O. The Controller is located in the Ovation I/O cabinet (cabinets are described in U3-1000 and U3-1005). IOIC Card Generic name for the Controller PCI I/O Interface card. Options are PCQL, PCRL, PCRR. I/O Module Standard I/O modules are made up of an Electronics module and a Personality module. Compact modules and Relay Output modules do not contain a Personality module. These modules perform the interface between the I/O Controller and the field devices. MAU Media Attachment Unit (MAU) is an alternate name for the Attachment Unit Module and includes the Electronics module and Personality module combined. This device interfaces the PCRR card (via the AUI cable) to the RNC (via fiberoptic cable) in remote I/O applications. Migration Process used to interface an Ovation Controller to WDPF Q-Line I/O.