1X00093G01模块备件

1X00093G01

MVME6100系列延续了从摩托罗拉嵌入式控制器提供迁移路径的方向
例如MVME2300/MVME2400，以及从摩托罗拉的SBC例如MVME2600/2700到单个平台。
MVME6100系列与MVME5100和MVME5500系列一样，融合了摩托罗拉的佳功能
嵌入式控制器和SBC使OEM能够支持具有相同基础平台的不同I/O要求，
简化零件号维护、技术专业要求和备件。
MVME6100系列为客户提供了从MVME2300、MVME2400、MVME2600到MVME2302的迁移路径，
MVME2700、MVME5100和MVME5500板，使它们能够利用MPC7457等功能
处理器、DDR内存、千兆以太网、PCI-X和2EST。
PCI扩展
MVME6100具有32/64位、33/66MHz PCI连接，以支持摩托罗拉等PCI扩展运营商
PMCspan。
P2输入/输出模式
与MVME5100和MVME5500系列一样，MVME6100系列支持两种跳线可配置的P2 I/O模式：
PMC模式和IPMC模式。PMC模式与MVME2300/MVME2400向后兼容，并且
PMC模式下的MVME5100/MVME5500。在PMC模式下，PMC插槽1的64个引脚和PMC插槽2的46个引脚为
可在P2上用于PMC后I/O。在IPMC模式下，MVME6100系列支持传统MVME761或MVME712M
当IPMC761或IPMC712 PMC卡填充在PMC插槽1中时，I/O模块（具有有限的PMC I/O）
配置，PMC插槽2包含为扩展SCSI保留的一些信号。
IPMC模块
IPMC761和IPMC712是可选的附加PMC模块，可提供与上一代摩托罗拉产品（如IPMC模式下的MVME2600/MVME2700和MVME5100/MVME5500）的向后兼容性
MVME761或MVME712M转换模块。IPMC模块为以下各项提供后部I/O支持：
•一个单端超宽SCSI端口
•一个并行端口
•四个串行端口（两个或三个异步和一个或两个同步/异步，取决于模块）
使用此PMC卡配置，仍有一个PMC插槽可用于支持OEM产品定制

1X00093G01

1X00093G01

The MVME6100 series continues the direction of providing a migration path from Motorola’s embedded controllers such as the MVME2300/MVME2400 and from Motorola’s SBCs such as the MVME2600/2700 to a single platform. The MVME6100 series, like the MVME5100 and MVME5500 series, merged the best features of Motorola’s embedded controllers and SBCs enabling OEMs to support varying I/O requirements with the same base platform, simplifying part number maintenance, technical expertise requirements and sparing. The MVME6100 series offers customers a migration path from the MVME2300, MVME2400, MVME2600, MVME2700, MVME5100 and MVME5500 boards to allow them to take advantage of features such as the MPC7457 processor, DDR memory, Gigabit Ethernet, PCI-X and 2eSST. PCI Expansion The MVME6100 has a 32/64-bit, 33/66MHz PCI connection to support PCI expansion carriers such as the Motorola PMCspan. P2 I/O Modes Like the MVME5100 and MVME5500 series, the MVME6100 series supports two, jumper-configurable P2 I/O modes: the PMC mode and IPMC mode. PMC mode is backwards compatible with the MVME2300/MVME2400 and MVME5100/MVME5500 in PMC mode. In PMC mode, 64 pins from PMC slot 1 and 46 pins from PMC slot 2 are available on P2 for PMC rear I/O. In IPMC mode, the MVME6100 series supports legacy MVME761 or MVME712M I/O modules (with limited PMC I/O) when an IPMC761 or IPMC712 PMC card is populated in PMC slot 1. In this configuration, PMC slot 2 contains some signals that are reserved for extended SCSI. IPMC Modules The IPMC761 and IPMC712 are optional add-on PMC modules that provide backwards compatibility with previousgeneration Motorola products (such as MVME2600/MVME2700 and MVME5100/MVME5500 in IPMC mode) using the MVME761 or MVME712M transition module. IPMC modules provide rear I/O support for: • One single-ended Ultra Wide SCSI port • One parallel port • Four serial ports (two or three async and one or two sync/async, depending on module) With this PMC card configuration, one PMC slot is still available to provide support for OEM product customization