1X00093G04模块备件

1X00093G04

转换模块
MVME761
MVME761转换模块提供了对IEEE 1284并行端口的行业标准连接器访问
10/100BaseTX端口，通过一个RJ-45连接器，两个DB-9连接器提供对异步串行端口的访问
配置为EIA-574 DTE和两个HD-26连接器，提供对同步/异步串行端口的访问。这些是连载的
MVME761面板上标记为串行3和串行4的端口可单独由用户配置为
通过安装摩托罗拉串行接口模块（SIM），EIA-232、EIA-530、V.35或X.21 DCE或DTE。
P2适配器向MVME761转换模块提供接口模块信号。3行P2适配器可以是：
用于8位SCSI。5行P2适配器支持16位SCSI和PMC I/O。
4 MVME6100系列
MVME712M
MVME712M转换模块提供了对并行端口（一种窄SCSI）的行业标准连接器访问
端口和四个DB-25连接器，提供对异步/同步串行端口的访问，跳线可配置
如EIA-232 DCE或DTE。P2适配器向MVME712M转换模块提供接口信号。3行P2
适配器可用于8位SCSI。
要访问通过5排VME64扩展连接器提供的其他用户可定义的I/O引脚，请使用特殊的
P2适配器板可用。此适配器面板取代了传统的3行P2适配器，并扩展了其功能
通过提供对PMC I/O引脚的访问。
软件支持固件监视器
MVME6100固件（称为MOTLoad）驻留在MVME61000闪存中，并提供通电自检
（POST）、初始化和操作系统引导能力。此外，它还提供了类似于
摩托罗拉以前的VMEbus板上经过时间验证的“错误”界面。
操作系统和内核
MVME6100系列支持引导各种操作系统，包括一系列完整的实时操作系统
操作系统和内核。VxWorks板支持包和Linux支持将可用于
MVME6100系列。

1X00093G04

1X00093G04

Transition Modules MVME761 The MVME761 transition module provides industry-standard connector access to the IEEE 1284 parallel port, a 10/100BaseTX port via an RJ-45 connector, two DB-9 connectors providing access to the asynchronous serial ports configured as EIA-574 DTE and two HD-26 connectors providing access to the sync/async serial ports. These serial ports, labeled as Serial 3 and Serial 4 on the faceplate of the MVME761, are individually user-configurable as EIA-232, EIA-530, V.35, or X.21 DCE or DTE via the installation of Motorola serial interface modules (SIMs). A P2 adapter provides interface module signals to the MVME761 transition module. The 3-row P2 adapter can be used for 8-bit SCSI. A 5-row P2 adapter supports 16-bit SCSI and PMC I/O. 4 MVME6100 Series MVME712M The MVME712M transition module provides industry-standard connector access to the parallel port, a narrow SCSI port and four DB-25 connectors providing access to the asynchronous/synchronous serial ports jumper configurable as EIA-232 DCE or DTE. A P2 adapter provides interface signals to the MVME712M transition module. The 3-row P2 adapter can be used for 8-bit SCSI. To gain access to the additional user-definable I/O pins provided via the 5-row VME64 extension connector, a special P2 adapter board is available. This adapter panel replaces the traditional 3-row P2 adapter and extends its capability by providing access to the PMC I/O pins. Software Support Firmware Monitor The MVME6100 firmware (known as MOTLoad) is resident in the MVME6100 Flash and provides power-on self-test (POST), initialization and operating system booting capabilities. In addition, it provides a debugger interface similar to the time proven “Bug” interface on previous VMEbus boards from Motorola. Operating Systems and Kernels The MVME6100 series supports booting a variety of operating systems including a complete range of real-time operating systems and kernels. A VxWorks board support package and Linux support will be available for the MVME6100 series.