1X00623H05模块备件

1X00623H05

可以通过在
MOTLoad提示。作为产品一部分包含的所有测试套件
特定的MOTLoad固件包是特定于产品的。更多
有关信息，请参阅
MOTLoad固件包用户手册。
通过testStatus获得测试结果和测试状态，
errorDisplay和taskActive命令。请参阅相应的
MOTLoad固件包用户的
更多信息请参阅手册。
3-4计算机组文献中心网站
非负载固件
3.
使用机动车辆
通过命令行接口执行与MOTLoad的交互
通过SBC上的串行端口连接到终端或
终端仿真器（例如，窗口的超命令）。默认值
MOTLoad串行端口设置为：9600波特，8位，无奇偶校验。
命令行接口
MOTLoad命令行界面类似于UNIX命令行
shell接口。通过输入有效的MOTLoad来启动命令
命令（文本字符串），并
按回车键表示输入结束。那末
执行指定的操作。MOTLoad命令行示例
提示如下所示。MOTLoad提示根据以下内容进行更改：
它用于的产品（例如，MVME5500、MVME6100）。
例子：
MVME6100>
如果在MOTLoad命令处输入了无效的MOTLOA命令
行提示，MOTLoad显示一条消息，说明该命令不是
建立
例子：
MVME6100＞mytest
找不到“mytest”
MVME6100>
如果用户输入可解析的部分MOTLoad命令字符串
并按下滑架返回键，
该命令将被执行，就像整个命令字符串已被执行一样
进入。此功能是一种用户输入快捷方式，可将所需的
命令行输入量。MOTLoad是一个不断变化的固件

1X00623H05

1X00623H05

their test contents, can be obtained by entering testSuite -d at the MOTLoad prompt. All testSuites that are included as part of a product specific MOTLoad firmware package are product specific. For more information, refer to the testSuite command description page in the MOTLoad Firmware Package User’s Manual. Test results and test status are obtained through the testStatus, errorDisplay, and taskActive commands. Refer to the appropriate command description page in the MOTLoad Firmware Package User’s Manual for more information. 3-4 Computer Group Literature Center Web Site MOTLoad Firmware 3 Using MOTLoad Interaction with MOTLoad is performed via a command line interface through a serial port on the SBC, which is connected to a terminal or terminal emulator (for example, Window’s Hypercomm). The default MOTLoad serial port settings are: 9600 baud, 8 bits, no parity. Command Line Interface The MOTLoad command line interface is similar to a UNIX command line shell interface. Commands are initiated by entering a valid MOTLoad command (a text string) at the MOTLoad command line prompt and pressing the carriage-return key to signify the end of input. MOTLoad then performs the specified action. An example of a MOTLoad command line prompt is shown below. The MOTLoad prompt changes according to what product it is used on (for example, MVME5500, MVME6100). Example: MVME6100> If an invalid MOTLoad command is entered at the MOTLoad command line prompt, MOTLoad displays a message that the command was not found. Example: MVME6100> mytest "mytest" not found MVME6100> If the user enters a partial MOTLoad command string that can be resolved to a unique valid MOTLoad command and presses the carriage-return key, the command will be executed as if the entire command string had been entered. This feature is a user-input shortcut that minimizes the required amount of command line input. MOTLoad is an ever changing firmware