VE4002S2T2B1模块备件

VE4002S2T2B1

三角洲™ I/O子系统易于安装和维护。
减少资本设备成本
减少安装时间和费用
„提高生产率
„提高工艺可用性
介绍
传统的I/O是一个模块化子系统，提供了灵活性
在安装期间。设计用于现场安装，
靠近您的设备。传统I/O具有以下功能：
和现场接线保护键，以确保正确的I/O
卡始终插入相应的接线板。
模块化、保护密钥和即插即用功能
做三角洲™ 传统I/O是您流程的明智选择
控制
Uo=30 VDC
Io=135 mA
Li=0
Ci=0
系统功率
输入
12伏直流电
24伏直流电
11.5 VDC至12.6 VDC
19.2 VDC至28.8 VDC
输出功率：70℃时总功率为10.2 W（组合
5 VDC和3.3 VDC的输出）
输出额定值：大13A至60C时为12VDC，或
大10 A至70 C的12 VDC（12 VDC
输入）
大8 A至60 C的12 VDC或
大6 A至70 C的12 VDC（24 VDC
输入）
2.0 A时的5.1 VDC
2.0 A时的3.4 VDC
环境规范
环境温度-40至70摄氏度
冲击10 G½-正弦波持续11 ms
从5 Hz到1 mm的峰间振动
至16 Hz，0.5 g从16 Hz至
150赫兹
空运的
污染物
ISA-S71.04–1985机载
G3类污染物
相对湿度：5%至95%，不凝结
注：序列号和
制造地点和日期。
警告：本产品具有以下特定说明：
危险环境中的安装、拆除和操作
地区。参考文件12P2046“DeltaV
可扩展工艺系统2区安装
其他安装说明包括
在“安装您的DeltaV自动化”中提供
系统”手册。
该电源的电压源为12 VDC
直通模式不能生成或包含
正常运行时，电位源超过
12.6伏直流电，大电流不超过16安。
移除和插入
此单元不能随系统一起移除或插入
电源已通电。
维护和调整
该装置不包含用户可维修部件，并且
不得因任何原因拆卸。
不需要校准。
其他安全批准

VE4002S2T2B1

VE4002S2T2B1

The DeltaV™ I/O subsystem is easy to install and maintain.
„ Decreases capital equipment costs
„ Decreases installation time and expense
„ Increases productivity
„ Increases process availability
Introduction
Traditional I/O is a modular subsystem that offers flexibility
during installation. It’s designed to be installed in the field,
near your devices. Traditional I/O is equipped with function
and field wiring protection keys to ensure that the correct I/O
card is always plugged into the corresponding terminal block.
Modularity, protection keys, and plug-and-play capabilities
make DeltaV™ Traditional I/O a smart choice for your process
contr
 Uo = 30 VDC
 Io = 135 mA
 Li= 0
 Ci= 0
System Power
Input
12 VDC
24 VDC
11.5 VDC to 12.6 VDC
19.2 VDC to 28.8 VDC
Output Power: 10.2 W total at 70 C (combined
outputs of 5 VDC and 3.3 VDC)
Output rating: 12 VDC at 13 A max to 60 C or
12 VDC at 10 A max to 70 C (12 VDC
input)
12 VDC at 8 A max to 60 C or
12 VDC at 6 A max to 70 C (24 VDC
input)
5.1 VDC at 2.0 A
3.4 VDC at 2.0 A
Environmental Specifications
Ambient Temperature -40 to 70 C
Shock 10 G ½-sinewave for 11 ms
Vibration 1 mm peak-to-peak from 5 Hz
to 16 Hz, 0.5 g from 16 Hz to
150 Hz
Airborne
Contaminants
ISA-S71.04 –1985 Airborne
Contaminants Class G3
Relative Humidity 5% to 95% non-condensing
Note: See product label for serial number and
location and date of manufacture.
Warning: This product has specific instructions for
installation, removal and operation in hazardous
areas. Refer to document 12P2046 "DeltaV
Scalable Process System Zone 2 Installation
Instructions". Other installation instructions are
available in the "Installing Your DeltaV Automation
System" manual.
The voltage source to this power supply in 12 VDC
passthrough mode must not generate or contain in
normal operation, a source of potential in excess of
12.6 VDC and supply no more than 16 A maximum.
Removal and Insertion
This unit cannot be removed or inserted with system
power energized.
Maintenance and Adjustment
This unit contains no user serviceable parts and
should not be disassembled for any reason.
Calibration is not required.
Other Safety Approval