KJ4001X1-GA1模块备件

KJ4001X1-GA1

键：传统的I/O接口和端子板具有
I/O功能键。这些键确保正确的I/O
卡始终插入相应的接线板。
它非常容易使用，让你有时间做更多的事情。
此设计使您能够初安装传统I/O
快速且有效。当您需要更换I/O卡时，
功能键设计确保您始终安装
正确。该键控系统提供了安全措施
通过防止安装错误的I/O接口。
传统的I/O端子块。
提高生产率
实时在线设备添加：在线添加
新的I/O接口意味着您的进程无法
打断。随着新设备的添加，DeltaV Explorer
确认并为其分配基本配置。
提高进程可用性
1： 1传统和HART I/O卡的冗余：
DeltaV冗余I/O使用与以下相同的2系列I/O卡：
非冗余I/O。这允许您利用您的投资
在已安装的I/O和I/O备件中。无其他配置
在使用冗余信道时需要。多余的
接线板提供相同的现场接线连接
作为单纯形块，因此不需要额外布线。
冗余自动感知：DeltaV自动感知冗余I/O，
这大大简化了向
系统冗余卡对被视为一张卡
在系统工具中。
自动切换：如果主I/O卡发生故障，
系统自动切换到“备用”卡
而无需用户干预。操作员得到了明确的指示
操作员显示屏上的切换通知。

KJ4001X1-GA1

KJ4001X1-GA1

Keys: Traditional I/O interfaces and terminal blocks have I/O function keys. These keys ensure that the correct I/O card is always plugged into the corresponding terminal block. It’s incredibly easy to use and gives you time to do more. This design enables you to initially install Traditional I/O quickly and efficiently. When you need to replace an I/O card, the function key design ensures that you will always install it correctly. This keying system provides a safety measure by preventing the wrong I/O interface’s being installed. Traditional I/O terminal block. Increases productivity Real-time, online equipment additions: Online addition of new I/O interfaces means your process does not get interrupted. As new equipment is added, the DeltaV Explorer acknowledges it and assigns it basic configuration. Increases process availability 1:1 Redundancy for Traditional and HART I/O cards: DeltaV redundant I/O uses the same Series 2 I/O cards as non- redundant I/O. This allows you to leverage your investment in installed I/O and in I/O spares. No additional configuration is needed when using a redundant channel. The redundant terminal blocks provide the same field wiring connections as simplex blocks, so there is no extra wiring needed. Autosense of redundancy: DeltaV autosenses redundant I/O, which greatly simplifies the task of adding redundancy to the system. The redundant pair of cards is treated as one card in the system tools. Automatic Switchover: Should a primary I/O card fail, the system automatically switches to the “standby” card without user intervention. The operator is given clear notification of a switchover at the operator display.