KJ4001X1-BA1模块备件

KJ4001X1-BA1

离散输出I/O卡
8通道24V直流隔离DO卡规范
频道数：8
隔离：每个通道与系统光学隔离
并在工厂测试至1500V DC。
输出范围：2V直流至60V直流
输出额定值1.0 A
关闭状态泄漏：大1.2 mA
每个卡的本地总线电流（标称12V DC）典型为100mA，大为150mA
每卡现场电路功率无
可配置通道类型输出
离散输出输出保持在控制器提交的后状态。
瞬时输出：输出在预先配置的时间段内处于激活状态
（100ms至100ms）。
连续脉冲输出：输出按预配置的百分比激活
基准时间段（100ms至100s）。分辨率=5毫秒
DO卡的简化电路和连接图，8通道，24V直流，隔离。
DeltaV M系列传统I/O，2022年8月
www.emerson。com/deltav 23
DO卡规格，8通道，24V直流，高压侧
频道数：8
隔离：每个通道与系统光学隔离
并在1500V DC下进行工厂测试。
输出范围：2V直流至60V直流
输出额定值：每通道1.0A连续；
每个I/O接口多3.0 A
关闭状态泄漏：大1.2 mA
每个卡的本地总线电流（标称12V DC）典型为100mA，大为150mA
每个I/O接口24V直流时每个卡的现场电路功率为3.0 A
可配置通道类型输出
离散输出输出保持在控制器提交的后状态。
瞬时输出：输出在预先配置的时间段内处于激活状态
（100ms至100ms）。
连续脉冲输出：输出按预配置的百分比激活
基准时间段（100ms至100s）。分辨率=5毫秒
可选保险丝2.0 A
DO卡的简化电路和连接图，8通道，24V直流，高压侧。
DeltaV M系列传统I/O，2022年8月
www.emerson。com/deltav 24
DO（plus）卡规格，32通道，24V直流，高压侧
通道数：32
输出额定值：每个通道100 mA
输出范围24V直流±10%
关闭状态泄漏：大0.1 mA
本地总线电流（标称12V直流）典型为100mA，大为150mA
24V直流（+20%/-15%）下每个卡的现场电路功率为3.2 A
隔离：每个通道与系统光学隔离
并在1500V DC下进行工厂测试。
单工DO（Plus）卡的简化电路和连接图，32通道，
24V直流，高压侧。
DeltaV M系列传统I/O，2022年8月
www.emerson。com/deltav 25
8通道120/230V交流隔离DO卡规范
频道数：8
隔离：每个通道与系统光学隔离
在250V AC下，从其他通道在250V交流下
输出范围20至250V交流
输出额定值：每通道1.0A连续；
高温度为60°C（140°F）时，每个卡的大电流为2.0 A
高温度为50°C（122°F）时，每张卡的大电流为3.0 A
120V交流电压下大2 mA的断开状态泄漏
230V交流电压下大4 mA
每个卡的本地总线电流（标称12V DC）典型为100mA，大为150mA
每卡现场电路功率无
可配置通道类型输出
离散输出输出保持在控制器提交的后状态。
瞬时输出：输出在预先配置的时间段内处于激活状态
（100ms至100ms）。
连续脉冲输出：输出按预配置的百分比激活
基准时间段（100ms至100s）。分辨率=5毫秒
可选保险丝2.0 A
DO卡的简化电路和连接图，8通道，120/230
在250V AC和来自其他通道的250V AC。
接通84至130V AC的检测电平
断开0至34V AC的检测电平
输入负载（触点清洁）2 mA，交流电压为120V
输入阻抗60KΩ
每个卡的本地总线电流（标称12V DC）典型为75 mA，大为100 mA
每卡现场电路功率无
可选保险丝2.0 A
DI卡的简化电路和连接图，8通道，120V交流，隔离。
DeltaV M系列传统I/O，2022年8月
www.emerson。com/deltav 20
PCI卡规格，4通道，24V直流，干触点
频道数：四
ON（小值）>4.8V DC（>5mA）的检测电平
断开检测电平（大值）＜1.0V DC（＜1mA）
24V直流（960欧姆）时的输入阻抗为25 mA
输入精度：0.1%读数（超过0.1 Hz至50 kHz）
分辨率+/-1脉冲
小脉冲宽度10µS
大输入电压24V直流+20%
分辨率计数器32位
输入频率正弦波10 Hz至50 kHz
方波0.1 Hz至50 kHz
润湿电压24V DC
本地总线电流（12V直流标称）大150 mA
每个卡的现场电路功率：24V DC时25 mA（1 A可复位保险丝）
隔离：每个通道与系统光学隔离
在250V AC下，以及在100V AC下从其他通道。
PCI卡的简化电路和连接图，4通道，24V直流，隔离。
DeltaV M系列传统I/O，2022年8月
www.emerson。com/deltav 21
SOE板卡规格，16通道，24V直流，干触点
信道数16
On>2 mA的检测电平
Off＜0.25 mA的检测电平
输入阻抗5K欧姆（近似值）
润湿电压24V DC
所有16个信道的信道扫描速率为0.25毫秒
时间戳精度（仅适用于启用SOE的信道）*0.25毫秒，来自同一板卡
1毫秒

KJ4001X1-BA1

KJ4001X1-BA1

Discrete Output I/O Cards
Specifications for DO Card, 8-channel, 24V DC, Isolated
Number of Channels Eight
Isolation Each channel is optically isolated from the system
and from each other and factory tested to 1500V DC.
Output Range 2V DC to 60V DC
Output Rating 1.0 A
Off State Leakage 1.2 mA maximum
LocalBus Current (12V DC nominal) per Card 100 mA typical, 150 mA maximum
Field Circuit Power per Card None
Configurable Channel Types Output
Discrete Output Output stays in last state submitted by the controller.
Momentary Output Output is active for a pre-configured time period
(100 ms to 100 s).
Continuous Pulse Output Output is active as a percentage of a pre-configured
base time period (100 ms to 100 s). Resolution = 5 ms
Simplified circuit and connection diagram for DO card, 8-channel, 24V DC, Isolated.
DeltaV M-series Traditional I/O August 2022
www.emerson.com/deltav 23
Specifications for DO Card, 8-channel, 24V DC, High-Side
Number of Channels Eight
Isolation Each channel is optically isolated from the system
and factory tested to 1500V DC.
Output Range 2V DC to 60V DC
Output Rating 1.0 A continuous per channel;
3.0 A maximum per I/O Interface
Off State Leakage 1.2 mA maximum
LocalBus Current (12V DC nominal) per Card 100 mA typical, 150 mA maximum
Field Circuit Power per Card 3.0 A at 24V DC per I/O Interface
Configurable Channel Types Output
Discrete Output Output stays in last state submitted by the controller.
Momentary Output Output is active for a pre-configured time period
(100 ms to 100 s).
Continuous Pulse Output Output is active as a percentage of a pre-configured
base time period (100 ms to 100 s). Resolution = 5 ms
Optional Fuse 2.0 A
Simplified circuit and connection diagram for DO card, 8-channel, 24V DC, High-Side.
DeltaV M-series Traditional I/O August 2022
www.emerson.com/deltav 24
Specifications for DO (plus) Card, 32-channel, 24V DC, High-Side
Number of Channels 32
Output Rating 100 mA per channel
Output Range 24V DC ±10%
Off-State Leakage 0.1 mA maximum
Local Bus Current (12V DC Nominal) 100 mA typical, 150 mA maximum
Field Circuit Power per Card 3.2 A @ 24V DC (+20%/-15%)
Isolation Each channel is optically isolated from the system
and factory tested to 1500V DC.
Simplified circuit and connection diagram for simplex DO (Plus) Card, 32-channel,
24V DC, High-Side.
DeltaV M-series Traditional I/O August 2022
www.emerson.com/deltav 25
Specifications for DO Card, 8-channel, 120/230V AC, Isolated
Number of Channels Eight
Isolation Each channel is optically isolated from system
at 250V AC and from other channels at 250V AC
Output Range 20 to 250V AC
Output Rating 1.0 A continuous per channel;
2.0 A maximum per card up to 60°C (140°F)
3.0 A maximum per card up to 50°C (122°F)
Off State Leakage 2 mA maximum at 120V AC
4 mA maximum at 230V AC
LocalBus Current (12V DC nominal) per Card 100 mA typical,150 mA maximum
Field Circuit Power per Card None
Configurable Channel Types Output
Discrete Output Output stays in last state submitted by the controller.
Momentary Output Output is active for a pre-configured time period
(100 ms to 100 s).
Continuous Pulse Output Output is active as a percentage of a pre-configured
base time period (100 ms to 100 s). Resolution = 5 ms
Optional Fuse 2.0 A
Simplified circuit and connection diagram for DO card, 8-channel, 120/230
at 250V AC and from other channels at 250V AC.
Detection Level for On 84 to 130V AC
Detection Level for Off 0 to 34V AC
Input Load (contact cleaning) 2 mA at 120V AC
Input Impedance 60 KΩ
LocalBus Current (12V DC nominal) per Card 75 mA typical, 100 mA maximum
Field Circuit Power per Card None
Optional Fuse 2.0 A
Simplified circuit and connection diagram for DI card, 8-channel, 120V AC, Isolated.
DeltaV M-series Traditional I/O August 2022
www.emerson.com/deltav 20
Specifications for PCI Card, 4-channel, 24V DC, Dry Contact
Number of Channels Four
Detection Level for ON (min.) >4.8V DC (>5 mA)
Detection Level for OFF (max.) <1.0V DC (<1 mA)
Input Impedance 25 mA at 24V DC (960 Ohms)
Input Accuracy 0.1% reading (over 0.1 Hz to 50 kHz)
Resolution +/- 1 pulse
Minimum Pulse Width 10 µS
Maximum Input Voltage 24V DC +20%
Resolution Counter 32-bit
Input Frequency Sine wave 10 Hz to 50kHz
Square wave 0.1 Hz to 50 kHz
Wetting Voltage 24V DC
LocalBus Current (12V DC nominal) 150 mA maximum
Field Circuit Power per Card 25 mA at 24V DC (1 A resettable fuse)
Isolation Each channel is optically isolated from the system
at 250V AC and from other channels at 100V AC.
Simplified circuit and connection diagram for PCI card, 4 channel, 24V DC, Isolated.
DeltaV M-series Traditional I/O August 2022
www.emerson.com/deltav 21
Specifications for SOE Card, 16-channel, 24V DC, Dry Contact
Number of Channels 16
Detection Level for On >2 mA
Detection Level for Off <0.25 mA
Input Impedance 5K ohm (approximate)
Wetting Voltage 24V DC
Channel Scan Rate 0.25 msec for all 16 channels
Time Stamp Accuracy (for SOE enabled channels only)* 0.25 msec from same card
1 msec from same controller
LocalBus Current (12V DC nominal) 75 mA typical, 100 mA maximum
Field Circuit Power per Card 75 mA at 24V DC
Isolation Each channel is optically isolated from the system
and factory tested to 1500V DC