KJ3241X1-EA1模块备件

KJ3241X1-EA1

KJ3241X1-BA1冗余串行接口
卡片
危险大气
二、3g
Nemko No.02ATEX431U
EEx nA IIC T4
功率规格
300 mA时的本地总线额定功率12 VDC
环境规范
环境温度-40至70摄氏度
冲击10g½正弦波持续11毫秒
振动：1毫米，峰间频率为5至16Hz；
0.5g，从16到150Hz
空运的
污染物
ISA-S71.04–1985机载
G3类污染物
相对湿度5-95%，不冷凝，IP 20
评级
接线盒键
位置
D4
注：序列号参见产品标签
以及制造地点和日期。还参考
板卡左侧的接线图。
警告：本产品具有以下特定说明：
危险环境中的安装、拆除和操作
地区。参考文件12P2046“DeltaV
可扩展工艺系统2区安装
其他安装说明包括
在“安装您的DeltaV自动化”中提供
系统”手册。
移除和插入
此单元不能随系统一起移除或插入
电源已通电。
维护和调整
该装置不包含用户可维修部件，并且
不得因任何原因拆卸。
不需要校准。
其他安全批准

KJ3241X1-EA1

KJ3241X1-EA1

KJ3241X1-BA1 Redundant Serial Interface
Card
Hazardous Atmosphere
 II 3 G
Nemko No. 02ATEX431U
EEx nA IIC T4
Power Specifications
LocalBus power rating 12 VDC at 300 mA
Environmental Specifications
Ambient Temperature -40 to 70o C
Shock 10g ½ Sinewave for 11 msec
Vibration 1mm Peak to Peak from 5 to 16Hz;
0.5g from 16 to 150Hz
Airborne
Contaminants
ISA-S71.04 –1985 Airborne
Contaminants Class G3
Relative Humidity 5 to 95% Non-Condensing IP 20
Rating
Terminal block key
position
D4
Note: Refer to the product label for serial number
and location and date of manufacture. Refer also to
the wiring diagram on the left side of the card.
Warning: This product has specific instructions for
installation, removal and operation in hazardous
areas. Refer to document 12P2046 "DeltaV 
Scalable Process System Zone 2 Installation
Instructions". Other installation instructions are
available in the "Installing Your DeltaV Automation
System" manual.
Removal and Insertion
This unit cannot be removed or inserted with system
power energized.
Maintenance and Adjustment
This unit contains no user serviceable parts and
should not be disassembled for any reason.
Calibration is not required.
Other Safety Approvals