VE4002S1T2B1模块备件

VE4002S1T2B1

Decreases capital equipment costs
Full system modularity: The Traditional I/O subsystem was
designed with your investment in mind. All components are
fully modular and may be installable under power. You add
I/O interface carriers and I/O interfaces in groups of 4, 8, 16,
or 32 channels as you need them. The modular design enables
you to purchase the exact amount of I/O cards, 8-wide or
4-wide carriers, power/ controllers, and 2-wide carriers you
need and add more DeltaV I/O as your system grows.
Reduced system footprint: The DeltaV system’s state-of-theart form factor design of the I/O components enables you to
mount the I/O interface carrier in a junction box in the field
so you significantly reduce the footprint of your equipment
and increase valuable control room space for other uses.
Installation: Save on wiring expenses by installing Classic
Instrumentation in the field, near the actual field devices.
Mounting the controller with the I/O further reduces your
wiring expenditures by eliminating the need for long runs
of multi-cores. The integrated design of the Traditional I/O
subsystem can eliminate the need for marshalling panels.
This saves you even more in your total capital costs.
The provision of in-line fuses and bussed power saves
on installation costs compared with external fuses and
power distribution.
Decreases installation time and expense
Plug-and-play installation saves money: All Traditional
I/O components plug into the I/O interface carrier. You can
install the I/O interface carriers to manage anticipated growth
and postpone the I/O interfaces until you’re ready to install
your additional field devices.
Phased installation saves time: As soon as you mount the
I/O interface carrier, you’re ready to begin installing the field
devices. I/O terminal blocks plug directly onto the I/O interface
carrier. There is no need to have the I/O cards installed.
Keys: Traditional I/O interfaces and terminal blocks have
I/O function keys. These keys ensure that the correct I/O
card is always plugged into the corresponding terminal block.
It’s incredibly easy to use and gives you time to do more.
This design enables you to initially install Traditional I/O
quickly and efficiently. When you need to replace an I/O card,
the function key design ensures that you will always install
it correctly. This keying system provides a safety measure
by preventing the wrong I/O interface’s being installed.

VE4002S1T2B1

VE4002S1T2B1

降低资本设备成本
全系统模块化：传统的I/O子系统是
设计时考虑到您的投资。所有组件均为：
完全模块化，可在电源下安装。你补充说
I/O接口载波和I/O端口以4、8、16、16和16为一组，
或32个频道，如您需要。模块化设计使
您需要购买准确数量的I/O卡，8宽或
4宽载波、电源/控制器和2宽载波
随着系统的增长，需要并添加更多的DeltaV I/O。
减少系统占地面积：DeltaV系统先进的I/O组件外形设计使您能够：
将I/O接口托架安装在现场接线盒中
因此，您可以显著减少设备的占地面积
并为其他用途增加宝贵的控制室空间。
安装：通过安装Classic节省布线费用
现场仪表，靠近实际现场设备。
将控制器与I/O一起安装会进一步减少
通过消除长时间运行的需要，实现布线支出
多核。传统I/O的集成设计
子系统可以消除编组面板的需要。
这将为您节省更多的总资本成本。
提供在线熔断器和母线节能
与外部保险丝相比的安装成本，以及
配电。
减少安装时间和费用
即插即用安装省钱：所有传统
I/O组件插入I/O接口载体。你可以
安装I/O接口载体以管理预期增长
并推迟I/O接口，直到您准备好安装
您的其他现场设备。
分阶段安装可节省时间：一旦安装
I/O接口载体，您已准备好开始现场安装
设备。I/O端子块直接插入I/O接口
载体不需要安装I/O卡。
键：传统的I/O接口和端子板具有
I/O功能键。这些键确保正确的I/O
卡始终插入相应的接线板。
它非常容易使用，让你有时间做更多的事情。
此设计使您能够初安装传统I/O
快速且有效。当您需要更换I/O卡时，
功能键设计确保您始终安装
正确。该键控系统提供了安全措施
通过防止安装错误的I/O接口。