VE4002S1T1B2模块备件

VE4002S1T1B2

DO卡规格，8通道，120/230V交流，高压侧
频道数：8
隔离：每个通道在250V AC下与系统光学隔离
输出范围20至250V交流
输出额定值：每通道1.0 A连续
高温度为60°C（140°F）时，每个卡的大电流为2.0 A
高温度为50°C（122°F）时，每张卡的大电流为3.0 A
120V交流电压下大2 mA的断开状态泄漏
230V交流电压下大4 mA
每个卡的本地总线电流（标称12V DC）典型为100mA，大为150mA
120V AC或230V AC时每个卡的现场电路功率为3.0A
可配置通道类型输出
离散输出：输出保持在控制器提交的后状态
瞬时输出：输出在预先配置的时间段内处于激活状态
（100ms至100ms）。
连续脉冲输出：输出按预配置的百分比激活
基准时间段（100ms至100s）。分辨率=5毫秒
可选保险丝2.0 A
DO卡的简化电路和连接图，8通道，120/230V交流，高压侧。
DeltaV M系列传统I/O，2022年8月
www.emerson。com/deltav 27
I/O接线板
可提供各种I/O端子块，以满足特定要求
功能和环境要求
安装I/O接口是I/O卡的组合
以及I/O端子块。每个I/O接口都有的键控
使得一旦安装在具有端子块的载体槽中，
该接线板将仅接受替换卡。
8通道标准接线盒。
键控机构由两个旋转的键控柱组成
并锁定在接线盒底座中。每个职位有6个职位：
A-F和1-6。每张卡都分配了一个的密钥，并标记
在I/O卡的一侧：
终端块键控示例。
键可防止安装不正确的卡，并且
卡上的图形信息便于确定
如果钥匙槽将接受特定卡。
有不同的I/O端子块可用于满足
现场信号的布线需求。
„8通道接线盒
„熔断8通道接线盒
„AI 8通道接线盒
„2线AI加16通道接线板
„4线AI加16通道接线板
„AO Plus 16通道接线盒
„DI 32通道接线盒
„DI Plus 32通道接线盒
„DO Plus 32通道接线盒
„隔离输入端子排
„RTD/电阻接线盒
„热电偶接线盒
以下冗余I/O端子块可用：
在某些I/O接口上，允许安装一对卡
作为冗余对。
„冗余AI 8通道接线盒
„冗余AI加16通道接线盒
„冗余AO 8通道接线盒
„冗余AO加16通道接线盒
„冗余离散8通道接线盒
„冗余DI加32通道接线盒
冗余DO加32通道接线盒
下页的表列出了兼容的
每个卡的接线板以及卡
独特的关键位置。列出的一个端子排
是推荐的接线板。
除标准信号布线外，某些板卡还可能
订购允许这些卡的大量接线板
连接到M系列质量连接解决方案
或来自Phoenix的三方布线解决方案或if IS屏障
由Pepperl和Fuchs提供，安装在相邻的
满足特殊信号调节或优化的机柜
现场布线解决方案。请参阅联盟计划
网站，以获取关于已批准的三方产品的详细信息。
„10针质量接线盒（仅单工）
„16针质量接线盒（仅单工）
„24针质量接线盒（仅单工）
„40引脚质量接线板（单工和冗余

VE4002S1T1B2

VE4002S1T1B2

Specifications for DO Card, 8-channel, 120/230V AC, High-Side
Number of Channels Eight
Isolation Each channel is optically isolated from the system at 250V AC
Output Range 20 to 250V AC
Output Rating 1.0 A continuous per channel
2.0 A maximum per card up to 60°C (140°F)
3.0 A maximum per card up to 50°C (122°F)
Off State Leakage 2 mA maximum at 120V AC
4 mA maximum at 230V AC
LocalBus Current (12V DC nominal) per Card 100 mA typical, 150 mA maximum
Field Circuit Power per Card 3.0 A at 120V AC or 230V AC
Configurable Channel Types Output
Discrete Output Output stays in last state submitted by the controller
Momentary Output Output is active for a pre-configured time period
(100 ms to 100 s).
Continuous Pulse Output Output is active as a percentage of a pre-configured
base time period (100 ms to 100 s). Resolution = 5 ms
Optional Fuse 2.0 A
Simplified circuit and connection diagram for DO card, 8-channel,120/230V AC, High-Side.
DeltaV M-series Traditional I/O August 2022
www.emerson.com/deltav 27
I/O Terminal Blocks
A variety of I/O terminal blocks are available to meet specific
functionality and environmental requirements of the
installation. The I/O interface is a combination of the I/O card
and the I/O terminal block. Each I/O interface is uniquely keyed
so that once installed in a carrier slot with a terminal block,
that terminal block will only accept a replacement card.
8-channel standard terminal block.
The keying mechanism consists of two keying posts that rotate
and lock into the terminal block base. Each post has 6 positions:
A-F and 1-6. Each card is assigned a unique key, which is marked
on the side of the I/O card:
Terminal block keying example.
The keys prevent installation of an incorrect card, and the
graphical information on the card makes it easy to determine
if a keyed slot will accept a particular card.
There are different I/O terminal blocks available to meet the
wiring needs of field signals.
„ 8-Channel terminal block
„ Fused 8-Channel terminal block
„ AI 8-Channel terminal block
„ 2-wire AI Plus 16-Channel terminal block
„ 4-wire AI Plus 16-Channel terminal block
„ AO Plus 16-Channel terminal block
„ DI 32-Channel terminal block
„ DI Plus 32-Channel terminal block
„ DO Plus 32-Channel terminal block
„ Isolated Input terminal block
„ RTD/Resistance terminal block
„ Thermocouple terminal block
The following redundant I/O terminal blocks are available
on some I/O interfaces, allowing a pair of cards to be installed
as a redundant pair.
„ Redundant AI 8-Channel terminal block
„ Redundant AI Plus 16-Channel terminal block
„ Redundant AO 8-Channel terminal block
„ Redundant AO Plus 16-Channel terminal block
„ Redundant Discrete 8-Channel terminal block
„ Redundant DI Plus 32-Channel terminal block
„ Redundant DO Plus 32-Channel terminal block
The table on the following page lists the compatible
terminal blocks for each card, along with the cards
unique key positions. The first terminal block listed
is the recommended terminal block.
In addition to standard signal wiring, some cards may also
be ordered with Mass Terminal blocks that allow these cards
to be connected to the M-series Mass Connection Solutions
or third party wiring solutions from Phoenix or if IS Barriers
are required from Pepperl and Fuchs, mounted in an adjacent
cabinet to meet special signal conditioning or for optimizing
field wiring solutions. Please refer to the Alliance Program
website for details on approved third-party products.
„ 10-pin Mass Termination Block (simplex only)
„ 16-pin Mass Termination Block (simplex only)
„ 24-pin Mass Termination Block (simplex only)
„ 40-pin Mass Termination Block (simplex and redundant