VE4001S2T2模块备件

VE4001S2T2

„热电偶接线盒
以下冗余I/O端子块可用：
在某些I/O接口上，允许安装一对卡
作为冗余对。
„冗余AI 8通道接线盒
„冗余AI加16通道接线盒
„冗余AO 8通道接线盒
„冗余AO加16通道接线盒
„冗余离散8通道接线盒
„冗余DI加32通道接线盒
冗余DO加32通道接线盒
下页的表列出了兼容的
每个卡的接线板以及卡
独特的关键位置。列出的一个端子排
是推荐的接线板。
除标准信号布线外，某些板卡还可能
订购允许这些卡的大量接线板
连接到M系列质量连接解决方案
或来自Phoenix的三方布线解决方案或if IS屏障
由Pepperl和Fuchs提供，安装在相邻的
满足特殊信号调节或优化的机柜
现场布线解决方案。请参阅联盟计划
网站，以获取关于已批准的三方产品的详细信息。
„10针质量接线盒（仅单工）
„16针质量接线盒（仅单工）
„24针质量接线盒（仅单工）
„40引脚质量接线板（单工和冗余）
„48针质量接线盒（单工和冗余）
DeltaV M系列传统I/O，2022年8月
www.emerson。com/deltav 28
传统I/O和端子板兼容性
I/O卡、I/O卡键控、传统I/O终端块、大规模终端块
AI，8通道，4-20 mA，HART A1输入/输出端子板
带保险丝的输入/输出端子块
4线I/O接线板
16引脚质量接线板
（支持双线设备）
24引脚质量接线板
（支持4线设备）
AI Plus，16通道，4-20 mA，HART A6 16通道双线AI
系列2 Plus的接线盒
16信道4线AI
系列2 Plus的接线盒
冗余2线和4线
接线板
48引脚AI质量终端
系列2 Plus的块
冗余48引脚
人工智能大规模终止
系列2 Plus的块
AO，8通道，4-20 mA，HART A4输入/输出端子板
熔断接线板
16引脚质量接线板
AO Plus，16通道，4-20 mA，HART A5 16通道AO
系列2 Plus的接线盒
冗余16通道AO
系列2 Plus的接线盒
48针AO质量
系列2 Plus的接线盒
冗余48引脚AO质量
系列2 Plus的接线盒
热电偶，中压C1输入/输出端子板
冷端补偿（CJC）
接线板
NA
RTD，8通道C3电阻温度装置
（RTD）接线板
NA
隔离输入卡C2隔离输入端子块NA

VE4001S2T2

VE4001S2T2

„ Thermocouple terminal block
The following redundant I/O terminal blocks are available
on some I/O interfaces, allowing a pair of cards to be installed
as a redundant pair.
„ Redundant AI 8-Channel terminal block
„ Redundant AI Plus 16-Channel terminal block
„ Redundant AO 8-Channel terminal block
„ Redundant AO Plus 16-Channel terminal block
„ Redundant Discrete 8-Channel terminal block
„ Redundant DI Plus 32-Channel terminal block
„ Redundant DO Plus 32-Channel terminal block
The table on the following page lists the compatible
terminal blocks for each card, along with the cards
unique key positions. The first terminal block listed
is the recommended terminal block.
In addition to standard signal wiring, some cards may also
be ordered with Mass Terminal blocks that allow these cards
to be connected to the M-series Mass Connection Solutions
or third party wiring solutions from Phoenix or if IS Barriers
are required from Pepperl and Fuchs, mounted in an adjacent
cabinet to meet special signal conditioning or for optimizing
field wiring solutions. Please refer to the Alliance Program
website for details on approved third-party products.
„ 10-pin Mass Termination Block (simplex only)
„ 16-pin Mass Termination Block (simplex only)
„ 24-pin Mass Termination Block (simplex only)
„ 40-pin Mass Termination Block (simplex and redundant)
„ 48-pin Mass Termination Block (simplex and redundant)
DeltaV M-series Traditional I/O August 2022
www.emerson.com/deltav 28
Traditional I/O and Terminal Block Compatibility
I/O Card I/O Card Keying Traditional I/O Terminal Blocks Mass Termination Blocks
AI, 8-Channel, 4–20 mA, HART A1 I/O terminal block
Fused I/O terminal block
4-wire I/O terminal block
16-pin Mass termination block
(Supports 2-wire Devices)
24-pin Mass termination block
(Supports 4-wire Devices)
AI Plus, 16-Channel, 4-20 mA, HART A6 16-Channel 2-Wire AI
terminal block for Series 2 Plus
16-Channel 4-Wire AI
terminal block for Series 2 Plus
Redundant 2- & 4-Wire
terminal block
48-pin AI Mass termination
block for Series 2 Plus
Redundant 48-pin
AI Mass termination
block for Series 2 Plus
AO, 8-Channel, 4–20 mA, HART A4 I/O terminal block
Fused terminal block
16-pin Mass termination block
AO Plus, 16-Channel, 4-20 mA, HART A5 16-Channel AO
terminal block for Series 2 Plus
Redundant 16-Channel AO
terminal block for Series 2 Plus
48-pin AO Mass
termination block for Series 2 Plus
Redundant 48-pin AO Mass
termination block for Series 2 Plus
Thermocouple, mV C1 I/O terminal block
Cold Junction Compensated (CJC)
terminal block
NA
RTD, 8-Channel C3 Resistant Temperature Device
(RTD) terminal block
NA
Isolated Input Card C2 Isolated Input terminal block NA