1C31224G02 模块备件

1C31224G02 

您的DSC安全设备旨在为您提供大的灵活性
以及方便性。请仔细阅读本手册，并让安装人员指导您的系统
操作以及在系统中实现了哪些功能。此系统的所有用户
在使用时应同样得到指导。在“系统信息”页面中填写您的所有区域
信息和访问代码，并将本手册保存在安全的地方，以备将来参考。
火灾探测
该设备能够监控火灾探测装置，如烟雾探测器，并提供：
检测到火灾情况时发出警告。良好的火灾探测取决于具有足够数量的
探测器放置在适当位置。该设备的安装应符合以下要求：
N、 F.P.A.标准#72（N.F.P.A.，马萨诸塞州昆西市巴特马奇公园，邮编02269）。仔细回顾家庭
本手册中的逃生计划指南。
注意：您的安装程序必须启用此设备的火灾探测部分，然后才能工作。
测试
为了确保系统继续按预期工作，您必须每周测试系统。请
请参阅本手册13页的“测试您的系统”。如果您的系统不能正常工作，请拨打
您的安装公司提供服务。
监测
该系统能够通过电话线向以下人员发送警报、故障和紧急信息：
监测站。如果您无意中触发警报，请立即致电监控站：
防止不必要的响应。
注意：安装程序必须启用监视功能才能正常工作。
一般系统操作
您的安全系统由DSC控制面板、一个或多个键盘和各种传感器组成
和检测器。控制面板将安装在公用设施壁橱或地下室中。这个
金属柜包含系统电子设备、保险丝和备用电池。通常没有理由
除安装人员或服务专业人员外，任何人都可以访问控制面板。
所有键盘都有声音指示器和命令输入键。LED键盘有一组
区域和系统状态灯。LCD键盘具有字母数字液晶显示器（LCD）。
键盘用于向系统发送命令并显示当前系统状态。这个
键盘将安装在受保护场所内靠近入口的方便位置/
出口门。
安全系统有几个保护区（区域），每个保护区将连接到一个保护区
或多个传感器（运动检测器、玻璃破裂检测器、门触点等）。警报中的传感器将：
通过LED键盘上闪烁的相应区域灯或上的书面信息指示
LCD键盘。
重要通知
安全系统无法防止紧急情况。它仅用于提醒您，如果包括：
你的紧急情况监测站。安全系统通常非常可靠
但它们可能不会在所有条件下都起作用，也不能替代谨慎的安全
执业或人寿和财产保险。您的安全系统应由以下人员安装和维护：
合格的安全专业人员，他们应向您提供以下保护级别的指导：
提供并基于系统操作。
2.
系统信息
填写以下信息：

1C31224G02 

1C31224G02 
Your DSC security equipment has been designed to provide you with the greatest possible flexibility
and convenience. Read this manual carefully and have your installer instruct you on your system’s
operation and on which features have been implemented in your system. All users of this system
should be equally instructed in its use. Fill out the “System Information” page with all of your zone
information and access codes and store this manual in a safe place for future reference.
Fire Detection
This equipment is capable of monitoring fire detection devices such as smoke detectors and providing
a warning if a fire condition is detected. Good fire detection depends on having adequate number of
detectors placed in appropriate locations. This equipment should be installed in accordance with
N.F.P.A. standard #72. (N.F.P.A., Batterymarch Park, Quincey MA 02269). Carefully review the Family
Escape Planning guidelines in this manual.
NOTE: Your installer must enable the fire detection portion of this equipment before it will work.
Testing
To insure that your system continues to work as intended, you must test your system weekly. Please
refer to “Testing Your System” on page 13 of this manual. If your system does not work properly, call
your installing company for service.
Monitoring
This system is capable of sending alarms, troubles and emergency information over telephone lines to
a monitoring station. If you inadvertently initiate an alarm, immediately call the monitoring station to
prevent an unnecessary response.
NOTE: Your installer must enable the monitoring feature before it will work.
General System Operation
Your security system is made up of a DSC control panel, one or more keypads and various sensors
and detectors. The control panel will be mounted out of the way in a utility closet or in a basement. The
metal cabinet contains the system electronics, fuses and stand-by battery. There is normally no reason
for anyone but the installer or service professional to have access to the control panel.
All the keypads have an audible indicator and command entry keys. The LED keypads have a group
of zone and system status lights. The LCD keypad has an alphanumeric liquid crystal display (LCD).
The keypad is used to send commands to the system and to display the current system status. The
keypad(s) will be mounted in a convenient location inside the protected premises close to the entry/
exit door(s).
The security system has several protected areas (zones) and each of these will be connected to one
or more sensors (motion detectors, glassbreak detectors, door contacts, etc.). A sensor in alarm will
be indicated by the corresponding zone lights flashing on an LED keypad or by written messages on
the LCD keypad.
IMPORTANT NOTICE
A security system cannot prevent emergencies. It is only intended to alert you and – if included –
your monitoring station of an emergency situation. Security systems are generally very reliable
but they may not work under all conditions and they are not a substitute for prudent security
practices or life and property insurance. Your security system should be installed and serviced by
qualified security professionals who should instruct you on the level of protection that has been
provided and on system operations.
2
System Information
Fill out the following information for