AS-BADU-256模块备件

本节提供了CableFast电缆规格、电缆长度和内部导线颜色
代码（标准和高功率电缆）、电缆选择和附件。
缆绳
规格
下表显示了CableFast电缆规格。
电缆规格
标准功率
电缆直径0.43英寸。标称值（10.9mm）
导体数量8-#20 AWG（0.8mm），7/28镀锡退火铜；半刚性
聚氯乙烯
32-#26 AWG（0.4mm），7/34镀锡退火铜；半刚性
聚氯乙烯
弯曲半径（内径）0.75英寸。小值（19.0 mm）
高功率
电缆直径0.55英寸。标称值（14.0 mm）
导体数量8-#18 AWG（1.0 mm），16/30镀锡退火铜；半刚性
聚氯乙烯
32-#20 AWG（0.8mm），10/30镀锡退火铜；半刚性
聚氯乙烯
弯曲半径（内径）1.50英寸。小值（38.1 mm）
通用规格
电缆护套颜色：黑色，小壁厚0.040英寸，柔性PVC
钢带长度0.32英寸。（8毫米）
导线标记：参见导线颜色编码表（下一页）
电线额定电压300 V，105°C，UL额定电压2517，CSA型AWM 1/2 FT1
电缆额定电压300 V，额定温度105°C
屏蔽铝/聚酯胶带（铝侧外）连接在
连接器主体（360°）。
#22 AWG，7/30加蔽线。屏蔽电阻16.55欧姆/Mft
名义上的
UL-758认证机构；AWM型号2517 VW-1和CSA C22:210.2；AWM I/II A/
B FT1
电缆快速布线
840使用100 00 11/2004 759
电缆长度下表显示了CableFast系统的电缆长度。
内导线颜色
代码
下表提供了标准功率和高功率的导线颜色代码
电缆。
端接尾纤的电缆长度
标准功率高功率高功率
3英尺（0.91米）X X X
6英尺（1.82米）X X X X
9英尺（2.73米）X X X
12英尺（3.64米）X X X
15英尺（4.6米）X
电线/
别针#
特设工作组
标准
权力
缆绳
特设工作组
高的
权力
缆绳
彩色电线/
别针#
特设工作组
标准
权力
缆绳
特设工作组
高的
权力
缆绳
颜色
1 26 20黑色21 26 20白色/蓝色
2 26 20棕色22 26 20白色/紫色
3 26 20红色23 26 20白色/灰色
4 26 20橙色24 26 20白色/黑色/
棕色的
5 26 20黄色25 26 20白色/黑色/
红色
6 26 20绿色26 26 20白色/黑色/
橙色
7 26 20蓝色27 26 20白色/黑色/
黄的
8 26 20紫色28 26 20白色/黑色/
绿色
9 20 18黑色29 20 18黄色
10 20 18棕色30 20 18绿色
11 26 20灰色31 26 20白色/黑色/
蓝色
12 26 20白色32 26 20白色/黑色/
紫罗兰
13 26 20白色/
黑色
33 26 20白色/黑色/
灰色
14 26 20白色/
棕色的
34 26 20白色/棕色/
红色
电缆快速布线
760 840使用100 00 2004年11月
电缆选择
（XTS）
下表显示了140XTS0xx端接电缆。
15 26 20白色/
红色
35 26 20白色/棕色/
橙色
16 26 20白色/
橙色
36 26 20白色/棕色/
黄的
17 26 20白色/
黄的
37 26 20白色/棕色/
绿色
18 26 20白色/
绿色
38 26 20白色/棕色/
蓝色
19 20 18红色39 20 18蓝色
20 20 18橙色40 20 18紫色
电线/
别针#
特设工作组
标准
权力
缆绳
特设工作组
高的
权力
缆绳
彩色电线/
别针#
特设工作组
标准
权力
缆绳
特设工作组
高的
权力
缆绳
颜色
零件号、电缆类型、电缆说明
标准
权力
高的
权力
带量子I/O的140XTS00203 X CableFast系统电缆
连接器，3英尺（0.9米）和“D”子连接器140XTS01203 X
带量子I/O的140XTS00206 X CableFast系统电缆
连接器，6英尺（1.8米）和“D”子连接器140XTS01206 X
140XTS00209 X带量子I/O的CableFast系统电缆
连接器，9英尺（2.7米）和“D”子连接器140XTS01209 X
140XTS00212 X带量子I/O的CableFast系统电缆
连接器，12英尺（3.7米）和“D”子连接器140XTS01212 X
电缆快速布线
840使用100 00 11/2004 761
用于的I/O连接器
量子
下图显示了Quantum系统的I/O连接器。
XCA102xx尾光纤下表显示了140XCA102XXX尾光纤电缆的说明。
尾纤引线下图显示了彩色编码的尾纤引线。
参见电缆长度
在上表中。
量子I/O
连接器
50引脚“D”
连接器
零件号
电缆类型
电缆描述标准功率高功率
140XCA10206 X CableFast系统电缆，6英尺（1.8米），
带“D”子连接器和尾纤
140XCA10215 X CableFast系统电缆，15英尺（4.6米），
带“D”子连接器和尾纤
40颜色编码
尾纤引线
50引脚“D”
连接器
参见电缆长度
在上表中。
电缆快速布线
762 840使用100 00 2004年11月
XTS102xx尾光纤下表显示了140XTS102XXX尾光纤电缆。
用于的I/O连接器
尾纤引线
下图显示了尾纤引线的I/O连接器。
零件号、电缆类型、电缆说明
标准
权力
高的
权力
140XTS10206 X带量子I/O的CableFast系统电缆
连接器，6英尺（1.8米）和尾光纤电缆
140 XTS10215 X带量子I/O的CableFast系统电缆
连接器，15英尺（4.6米）和尾光纤电缆
40颜色编码
尾纤引线
量子I/O
连接器
参见电缆长度
在上表中。
电缆快速布线
840使用100 00 11/2004 763
CableFast配件
概述以下信息与CableFast附件有关。
附件：下表显示了CableFast的零件号和说明
配件。
接线板
公共条his section provides CableFast cable specifications, cable lengths, inner wire color
codes (for standard and high power cables), cable selections, and accessories.
Cable
Specifications
The following table shows the CableFast cable specifications.
Cable Specifications
Standard Power
Cable Diameter 0.43 in. nominal (10.9 mm)
Number of Conductors 8-#20 AWG (0.8 mm), 7/28 tinned annealed copper; semi rigid
PVC
32-#26 AWG (0.4 mm), 7/34 tinned annealed copper; semi rigid
PVC
Bend Radius (I.D.) 0.75 in. min. (19.0 mm)
High Power
Cable Diameter 0.55 in. nominal (14.0 mm)
Number of Conductors 8-#18 AWG (1.0 mm), 16/30 tinned annealed copper; semi rigid
PVC
32-#20 AWG (0.8 mm), 10/30 tinned annealed copper; semi rigid
PVC
Bend Radius (I.D.) 1.50 in. min. (38.1 mm)
Common Specifications
Cable Jacket Jacket color: black, 0.040 in wall min, flexible PVC
Wire Strip Length 0.32 in. (8 mm)
Wire Marking See the wire color coding table (next page)
Wire Rating 300 V, 105° C UL rated 2517, CSA Type AWM 1/2 FT1
Cable Rating 300 V, 105° C rated
Shielding Aluminum/polyester tape (aluminum side out) attached at
connector body (360°).
#22 AWG, 7/30 drain wire.Shield resistance 16.55 Ohms/Mft
nominal
Agency Approval UL-758; AWM style 2517 VW-1 and CSA C22:210.2; AWM I/II A/
B FT1
CableFast Cabling
840 USE 100 00 11/2004 759
Cable Lengths The following table shows the cable lengths for the CableFast system.
Inner Wire Color
Codes
The following table provides the wire color codes for standard power and high power
cables.
Cable Lengths Terminated Pigtail
Standard Power High Power High Power
3 ft. (0.91 m) X X
6 ft. (1.82 m) X X X
9 ft. (2.73 m) X X
12 ft. (3.64 m) X X
15 ft. (4.6 m) X
Wire/
Pin #
AWG for
Standard
Power
Cable
AWG for
High
Power
Cable
Color Wire/
Pin #
AWG for
Standard
Power
Cable
AWG for
High
Power
Cable
Color
1 26 20 Black 21 26 20 White/Blue
2 26 20 Brown 22 26 20 White/Violet
3 26 20 Red 23 26 20 White/Gray
4 26 20 Orange 24 26 20 White/Black/
Brown
5 26 20 Yellow 25 26 20 White/Black/
Red
6 26 20 Green 26 26 20 White/Black/
Orange
7 26 20 Blue 27 26 20 White/Black/
Yellow
8 26 20 Violet 28 26 20 White/Black/
Green
9 20 18 Black 29 20 18 Yellow
10 20 18 Brown 30 20 18 Green
11 26 20 Gray 31 26 20 White/Black/
Blue
12 26 20 White 32 26 20 White/Black/
Violet
13 26 20 White/
Black
33 26 20 White/Black/
Gray
14 26 20 White/
Brown
34 26 20 White/Brown/
Red
CableFast Cabling
760 840 USE 100 00 11/2004
Cable Selections
(XTS)
The following table shows the 140XTS0xx terminated cables.
15 26 20 White/
Red
35 26 20 White/Brown/
Orange
16 26 20 White/
Orange
36 26 20 White/Brown/
Yellow
17 26 20 White/
Yellow
37 26 20 White/Brown/
Green
18 26 20 White/
Green
38 26 20 White/Brown/
Blue
19 20 18 Red 39 20 18 Blue
20 20 18 Orange 40 20 18 Violet
Wire/
Pin #
AWG for
Standard
Power
Cable
AWG for
High
Power
Cable
Color Wire/
Pin #
AWG for
Standard
Power
Cable
AWG for
High
Power
Cable
Color
Part Number Cable Type Cable Description
Standard
Power
High
Power
140XTS00203 X CableFast system cable with Quantum I/O
connector, 3 ft. (0.9 m) and "D" sub connector 140XTS01203 X
140XTS00206 X CableFast system cable with Quantum I/O
connector, 6 ft. (1.8 m) and "D" sub connector 140XTS01206 X
140XTS00209 X CableFast system cable with Quantum I/O
connector, 9 ft. (2.7 m) and "D" sub connector 140XTS01209 X
140XTS00212 X CableFast system cable with Quantum I/O
connector, 12 ft. (3.7 m) and "D" sub connector 140XTS01212 X
CableFast Cabling
840 USE 100 00 11/2004 761
I/O Connector for
Quantum
The following figure shows the I/O Connector for the Quantum system.
XCA102xx Pigtail The following table shows the 140XCA102xx Pigtail cable description.
Pigtail Leads The following figure shows the color coded pigtail leads.
See cable lengths
in the above table.
Quantum I/O
Connector
50-pin “D”
Connector
Part Number
 Cable Type
Cable Description Standard Power High Power
140XCA10206 X CableFast system cable, 6 ft (1.8 m),
with "D" sub connector and pigtails
140XCA10215 X CableFast system cable, 15 ft (4.6 m),
with "D" sub connector and pigtails
40 Color Coded
Pigtail Leads
50-pin “D”
Connector
See cable lengths
in the above table.
CableFast Cabling
762 840 USE 100 00 11/2004
XTS102xx Pigtail The following table shows the 140XTS102xx Pigtail cables.
I/O Connector for
Pigtail Leads
The following figure shows the I/O connector for pigtail leads.
Part Number Cable Type Cable Description
Standard
Power
High
Power
140XTS10206 X CableFast system cable with Quantum I/O
connector, 6 ft. (1.8 m), and pigtail cable
140 XTS10215 X CableFast system cable with Quantum I/O
connector, 15 ft. (4.6 m), and pigtail cable
40 Color Coded
Pigtail Leads
Quantum I/O
Connector
See cable lengths
in the above table.
CableFast Cabling
840 USE 100 00 11/2004 763
CableFast Accessories
Overview The following information pertains to the CableFast accessories.
Accessories The following table shows the part numbers and descriptions for CableFast
Accessories.
Terminal Block
Common Strip
The following figure shows the terminal block common strip.
Jumper, Fuse
Replacement
Fuse replacement information is given in the following table.
The following figure shows a jumper.
Part Number Description Quantity
140CFU40000 Fuse Kit, Wickmann 4 A 10
140CFU08000 Fuse Kit, Wickmann 0.8 A 10
140CFU00600 Fuse Kit, Wickmann 0.063 A 10
140CFX00110 Terminal Block Common Strip, 10 Position (see below) 10
Part Number Description Quantity
140 CFX 002 10 Jumper, Fuse Replacement (see below) 10
The jumper is used instead of fuses as a disconnect device.
CableFast Cabling
764 840 USE 100 00 11/2004
840 USE 100 00 11/2004 765
F
Error Stopped Codes
Error Stopped Codes
Overview The following is a list of error stopped codes and their definitions.
Error Stopped
Codes
The following is a list of error stopped codes for the Quantum system.
Stop Bit Code (hex) Description
7FFF PLC unhealthy
8000 PLC stopped
4000 Bad I/O map
2000 PLC unconfigured
1000 Bad Modbus port intervention
0800 Bad segment scheduler
0400 Start-of-network (SON) did not start a segment
0200 Bad power-down checksum
0100 No end of logic detected
0080 Watchdog timer has expired
0040 Real time clock has failed
0020 Bad coil used table
0010 RIO option has failed
0008 Illegal node type found
0004 User logic checksum error
0002 Discrete disable table error
0001 Bad configuration
Error Stpd. Codes
766 840 USE 100 00 11/2004
Definitions for
Error Stopped
Codes
The following are definitions for Error Stopped Codes.
 PLC unhealthy: This condition indicates that the CPU has failed one or more of
its health diagnostics. In all probability the CPU will have to be replaced.
 PLC stopped: By itself, an 8000 hex is not an error but a CPU state. If, for
example, a user issues a CPU stop command, the status register would indicate
"8000" hex. An error condition exists when "8000" is anded with one or more of
the previously defined errors (bits 0-14). An example would be an error code of
"8100"; this suggests a PLC stopped with No End of Logic Node detected.
 Bad I/O map: This error will occur if the user declares more than one I/O drop in
his configuration but does not have an RIO Head installed. This error may also
occur if a drop has been configured in such a way so as to exceed the maximum
number of inputs/outputs allowable per drop.
 PLC unconfigured: The user should expect this condition if he is trying to log into
the CPU for the first time. This error indicates that the CPU has not been
configured. The user should write a configuration offline and transfer it to the CPU
prior to attempting to login to the CPU. If this error appears while seeking to
coomunicate to a previously running CPU, this would suggest a corrupted state
memory in the CPU. The usr should clear memory and attempt to reload the user
logic program.
 Bad modbus port intervention: This error will most likely appear in conjunction
with another error. The CPU would in all likelihood be stopped when this error
occurs. This error may also appear upon the user’s attempt to clear the system
stop state. The user should try to clear user logic and reload.
 Bad segment scheduler: This error indicates improper programming of the
segment scheduler.
 Start-of-network (SON) did not start a segment: This error is most often
caused by improper programming. It can also be caused by a corrupted program
and can be detected by issuing a start command to the CPU.
 Bad power-down checksum: This error indicates that continuous run time ram
diagnostic has failed. Reload the user logic program. If this error persists, replace
the CPU.
 No end of logic detected: This error is usually caused by an incomplete or
unsuccessful load of the program. Try another reload.
 Watchdog timer has expired: This error indicates that the CPU has taken too
much time to complete its current scan. This error will sometimes occur with
ambitious DX programming techniques. The user may want to increase the
Watchdog Timer value. This error may also point to a failure of the CPU.
 Real time clock has failed: Repl
f