490NTRJ11模块备件

CI873和TP867-以太网/IP接口
本文件包含一个或多个ABB产品的信息，可能包括：
对一个或多个标准的描述或引用，这些标准通常与：
ABB产品。标准的任何此类描述或对
本标准并不代表本文件中引用的所有ABB产品
支持所述或参考标准的所有功能。为了确定
特定ABB产品支持的特定功能，读者应参考
特定ABB产品的产品规格。
ABB可能拥有一项或多项或未决申请，以保护本文件所述ABB产品的知识产权。
本文件中的信息如有更改，恕不另行通知，不应
被解释为ABB的承诺。ABB对以下任何错误概不负责：
可能出现在本文档中。
在任何情况下，ABB均不对直接、间接、特殊、附带或后果负责
因使用本文件而产生的任何性质或种类的损害，ABB也不得
对因使用本文件所述的任何软件或硬件而导致的附带或间接损害负责。
未经ABB书面许可，不得复制或复制本文件及其部分内容，不得将其内容透露给第三方或使用
用于任何未经授权的目的。
本文件中描述的软件或硬件是根据许可证提供的，并且
只能根据该许可条款使用、复制或披露。这
产品符合EMC指令2004/108/EC和低压指令2006/95/EC中规定的要求。
商标
版权、注册商标和商标的所有权利属于其各自的所有者。
ABB版权所有©2003-2013。
版权所有。
发布日期：2013年2月
文件编号：3BSE036351-510 AThis document contains information about one or more ABB products and may include a
description of or a reference to one or more standards that may be generally relevant to
the ABB products. The presence of any such description of a standard or reference to a
standard is not a representation that all of the ABB products referenced in this document
support all of the features of the described or referenced standard. In order to determine
the specific features supported by a particular ABB product, the reader should consult the
product specifications for the particular ABB product.
ABB may have one or more patents or pending patent applications protecting the intellectual property in the ABB products described in this document.
The information in this document is subject to change without notice and should not be
construed as a commitment by ABB. ABB assumes no responsibility for any errors that
may appear in this document.
In no event shall ABB be liable for direct, indirect, special, incidental or consequential
damages of any nature or kind arising from the use of this document, nor shall ABB be
liable for incidental or consequential damages arising from use of any software or hardware described in this document.
This document and parts thereof must not be reproduced or copied without written permission from ABB, and the contents thereof must not be imparted to a third party nor used
for any unauthorized purpose.
The software or hardware described in this document is furnished under a license and
may be used, copied, or disclosed only in accordance with the terms of such license. This
product meets the requirements specified in EMC Directive 2004/108/EC and in Low Voltage Directive 2006/95/EC.
TRADEMARKS
All rights to copyrights, registered trademarks, and trademarks reside with their respective owners.
Copyright © 2003-2013 by ABB.
All rights reserved.
Release: February 2013
Document number: 3BSE036351-510 AIn order to minimize the risk of injury to personnel and/or damage to the
equipment, always comply with the following safety instructions when
installing and operating an AC 800M Controller system. Local, stricter statutory
regulations must always take precedence over the safety instructions given here.
Warnings and Information Symbols in the Text Margin
Observe the symbols for warnings and information located in other Chapters
and Appendices of this book. The symbols are placed in the left-hand margin,
adjacent to paragraphs requiring special attention. For an explanation of the
symbols, see About This User Manual - Warning, Caution, Information, and Tip
Icons on page 24.
The Safety Instructions are classified as mandatory reading for all suitably
qualified personnel intending to operate the AC 800M Controller.
14 3BSE036351-510 A
Safety Summary
Personnel and Process Safety
A control system is a tool used to control various processes. Responsibility for
attaining and maintaining a satisfactory level of safety rests with the personnel
who engineer, operate and maintain the equipment. It is important to have an
extensive knowledge of all control functions, the inherent safety risks that may
be involved in the process, and to possess the imaginative ability to anticipate
situations in which accidents may occur.
The following Safety Instructions must be observed:
• Take care when:
– fitting or removing units
– connecting or disconnecting cables
– resetting or switching units to manual operation
• For hazardous locations special restrictions apply, see Appendix E,
Standards.
• Never connect the equipment to the mains power supply during installation
work.
• Take extreme care when connecting the system to the mains power supply.
Injury or death can be the result of incorrect procedures.
• Ensure that all personnel operating or maintaining the installation know the
exact location of and how to operate the equipment isolating safety switch
and the mains power supply isolating switch.
• When the process sub-sections have been checked and a test run has been
performed, a person responsible must check the interlocking chains etc. All
concerned personnel must be fully informed regarding test runs to be
performed.
TAKE CARE AT ALL TIMES – This will prevent accidents from
occurring and help protect valuable equipment.