140CFE03200模块现货

140CFE03200

仔细阅读这些说明，并查看要熟悉的设备
在尝试安装、操作或维护设备之前，请先检查设备。以下特别
本文档中或设备上可能出现警告信息
潜在危险，或提请注意澄清或简化
程序
在危险或警告安全标签上添加此符号表示：
存在电气危险，如果
没有遵守说明。
这是安全警告符号。它用于提醒您潜在的个人信息
伤害危险。遵守此符号后面的所有安全信息，以避免：
可能的伤害或死亡。
危险表示一种迫在眉睫的危险情况，如果不避免，将
导致死亡、重伤或设备损坏。
危险
警告
警告表示潜在的危险情况，如果不避免，可能导致
死亡、重伤或设备损坏。
注意安全
警告表示潜在危险情况，如果不避免，可能导致
受伤或设备损坏。
安全信息
xii 840使用100 00 2004年11月
请注意，电气设备只能由合格人员进行维修。施耐德电气对使用过程中产生的任何后果不承担任何责任
这种材料。本文件不作为未经培训人员的指导手册
人。
©2004施耐德电气。版权所有。
840使用100 00 2004年11月13日
关于这本书
一瞥
文件范围：本手册是量子自动化硬件的参考指南
系统
有效性注意：本书中的数据和插图不具有约束力。我们保留以下权利：
根据我们的持续产品开发政策修改我们的产品。这个
本文件中的信息如有更改，恕不另行通知
解释为施耐德电气的承诺。
产品相关
警告
施耐德电气对可能出现的任何错误概不负责
文件如果您有任何改进或修改建议，或
在本出版物中发现错误，请通知我们。
本文件的任何部分不得以任何形式或任何方式复制，包括电子版
或机械，包括复印，未经明确书面许可
施耐德电气。
在下列情况下，必须遵守所有相关的州、地区和地方安全法规
安装和使用本产品。出于安全考虑并确保合规性
在记录系统数据的情况下，只有制造商应对
组件。
当控制器用于具有技术安全要求的应用时，
请遵循相关说明。
我们的硬件未使用施耐德电气软件或经批准的软件
产品可能导致不正确的操作结果。
不遵守本产品相关警告可能导致人身伤害或设备损坏
损坏
用户意见我们欢迎您对本文件提出意见。您可以通过电子邮件联系我们：
techpub@schneider-electric.com

140CFE03200

140CFE03200

Read these instructions carefully, and look at the equipment to become familiar with
the device before trying to install, operate, or maintain it. The following special
messages may appear throughout this documentation or on the equipment to warn
of potential hazards or to call attention to information that clarifies or simplifies a
procedure.
The addition of this symbol to a Danger or Warning safety label indicates
that an electrical hazard exists, which will result in personal injury if the
instructions are not followed.
This is the safety alert symbol. It is used to alert you to potential personal
injury hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.
DANGER indicates an imminently hazardous situation, which, if not avoided, will
result in death, serious injury, or equipment damage.
DANGER
WARNING
WARNING indicates a potentially hazardous situation, which, if not avoided, can result
in death, serious injury, or equipment damage.
CAUTION
CAUTION indicates a potentially hazardous situation, which, if not avoided, can result
in injury or equipment damage.
Safety Information
xii 840 USE 100 00 11/2004
PLEASE NOTE Electrical equipment should be serviced only by qualified personnel. No responsibility is assumed by Schneider Electric for any consequences arising out of the use
of this material. This document is not intended as an instruction manual for untrained
persons.
© 2004 Schneider Electric. All Rights Reserved.
840 USE 100 00 11/2004 xiii
About the Book
At a Glance
Document Scope This manual is a reference guide for the hardware of the Quantum automation
system.
Validity Note The data and illustrations found in this book are not binding. We reserve the right to
modify our products in line with our policy of continuous product development. The
information in this document is subject to change without notice and should not be
construed as a commitment by Schneider Electric.
Product Related
Warnings
Schneider Electric assumes no responsibility for any errors that may appear in this
document. If you have any suggestions for improvements or amendments or have
found errors in this publication, please notify us.
No part of this document may be reproduced in any form or by any means, electronic
or mechanical, including photocopying, without express written permission of
Schneider Electric.
All pertinent state, regional, and local safety regulations must be observed when
installing and using this product. For reasons of safety and to ensure compliance
with documented system data, only the manufacturer should perform repairs to
components.
When controllers are used for applications with technical safety requirements,
please follow the relevant instructions.
Failure to use Schneider Electric software or approved software with our hardware
products may result in improper operating results.
Failure to observe this product related warning can result in injury or equipment
damage.
User Comments We welcome your comments about this document. You can reach us by e-mail at
techpub@schneider-electric.com