CCON-23 10000110155 工控自动化控制卡

CCON-23 10000110155 工控自动化控制卡 
模块化，允许逐步扩展。
•简单的DIN导轨连接/拆卸程序，使用独特的滑块和
锁定机构。
•通过单元/通道LED提供快速、简单的故障排除程序。
•IP20级防护，无需外壳。
•由于装置极低，允许使用低成本密封外壳
散热，即使环境温度为40C（104）F） 外面
圈占地
•所有装置均通过EMC认证。
•可通过电气模块总线连接多达192个I/O信号。
•可通过光学模块总线连接多达1344个I/O信号。
•S100 I/O连接可用。
•可连接Satt I/O。
•允许通过PROFIBUS DP连接大量I/O。
•连接至基金会现场总线高速以太网（FF HSE）。
•连接到Modbus TCP。
•与IEC 61850的连接。
•连接到Advant现场总线100。
•连接至MOD5至MOD5。
•连接到PROFINET IO。
•连接到以太网/IP。
•允许连接大量串行数据的自定义协议
通信RS-232C端口。
•连接到MasterBus 300网络。
•通过网关（以太网/LON）连接到INSUM。
•可通过驱动总线和模块总线连接ABB驱动器。
1节介绍产品发布历史
3BSE036351-510 A 57
•内存内置电池备份（使用外部电源的PM891除外
仅电池备用）。
•外部备用电池。
•CPU冗余（PM861/PM864/PM865/PM866/PM891）。
•使用一对BC810的冗余/分段CEX总线。
•使用PM865/SM810/SM811的安全完整性2级认证控制器。
•使用PM865/SM811的安全完整性3级认证控制器
•支持CEX总线单元的热插拔。
产品发布历史
AC 800M硬件平台的初始版本号为1.0。
该数字用于保持上所有单元和组件的配置
AC 800M平台在一起，并作为未来不同
文件。随着未来AC 800M硬件平台配置的增长
发布，因此版本号将相应增加。
AC 800M的产品版本发布历史见57页的表2。
表2.AC 800M发布历史
版本说明用户文档
5.1.1 PM851A、PM856A和PM860A是
补充。
增加了CI873的冗余。
3BSE036351-510 A
5.1 PM891、CI869、CI871、CI872、CI873
添加
3BSE036351-510
添加了5.0 SP2 CI868、PM866和SM811。3BSE036351R5021
添加了5.0 SP1 SB822和CI867。3BSE036351R5011
添加了5.0 CI865。3BSE036351R5001
产品发布历史1节介绍
58 3BSE036351-510 A
4.1关于SS823的新信息是：
补充。SM810和闪存
已添加。
3BSE036351R4101
添加了4.0 CI862。3BSE036351R4001
3.1增加了PM851，3BSE 036 351 R101
3.0 PM865，PM861A，PM864A，BC810，
SM810、CI854A、CI858、CI860和
添加SS823。
3BSE 030 827 R201
2.1增加PM864。3BSE 027 941 R301
2.1增加了CI855和CI856。3BSE 027 941 R101
添加了2.0 PM861和CI854/CI857。3BSE 026 020 R101
1.1增加PM856和CI852。3BSE 019 193 R201
1.0初始AC 800M版本。3BSE 019 193 R101

CCON-23 10000110155 工控自动化控制卡 


CCON-23 10000110155 工控自动化控制卡 
Modularity, allowing for step-by-step expansion.
• Simple DIN-rail attachment/detachment procedures, using a unique slide and
lock mechanism.
• Fast, simple troubleshooting procedures available via unit/channel LEDs.
• IP20 Class protection with no requirement for enclosures.
• Allows for the use of low-cost, sealed enclosures due to extremely low unit
heat dissipation, even at an ambient temperature of 40 C (104 F) outside the
enclosure.
• All units are fully EMC certified.
• Connection of up to 192 I/O signals, via Electrical ModuleBus, is available.
• Connection of up to 1344 I/O signals, via Optical ModuleBus, is available.
• Connection of S100 I/O is available.
• Connection of Satt I/O is available.
• Allows connecting a large number of I/Os, via PROFIBUS DP.
• Connection to FOUNDATION Fieldbus High Speed Ethernet (FF HSE).
• Connection to Modbus TCP.
• Connection to IEC 61850.
• Connection to Advant Fieldbus 100.
• Connection to MOD5-to-MOD5.
• Connection to PROFINET IO.
• Connection to EtherNet/IP.
• Allows connecting custom protocols of a large amount of Serial
communication RS-232C ports.
• Connection to MasterBus 300 Networks.
• Connection to INSUM via Gateway (Ethernet/LON).
• Connection to ABB Drives is available, over DriveBus and ModuleBus.
Section 1 Introduction Product Release History
3BSE036351-510 A 57
• Built-in battery backup of memory (except for PM891 that uses external
battery backup only).
• External battery backup.
• CPU Redundancy (PM861/PM864/PM865/PM866/PM891).
• Redundant/sectioned CEX-Bus using a pair of BC810.
• Safety Integrity Level 2 certified controller using PM865/SM810/SM811.
• Safety Integrity Level 3 certified controller using PM865/SM811
• Support for hot swap of CEX-Bus units.
Product Release History
The AC 800M hardware platform has been allocated the initial version number 1.0.
This number is required to keep the configuration of all units and components on the
AC 800M platform together, and to act as a reference in the future between different
documents. As the AC 800M hardware platform configuration grows in future
releases, so the version number will increase accordingly.
See Table 2 on page 57 for the product version release history of AC 800M.
Table 2. AC 800M Release History
Version Description User Doc
5.1.1 PM851A, PM856A, and PM860A are
added.
Redundancy for CI873 is added.
3BSE036351-510 A
5.1 PM891, CI869, CI871, CI872, CI873
are added
3BSE036351-510
5.0 SP2 CI868, PM866, SM811 are added. 3BSE036351R5021
5.0 SP1 SB822 and CI867 are added. 3BSE036351R5011
5.0 CI865 is added. 3BSE036351R5001
Product Release History Section 1 Introduction
58 3BSE036351-510 A
4.1 New information about SS823 is
added. SM810 and Compact Flash
have been added.
3BSE036351R4101
4.0 CI862 is added. 3BSE036351R4001
3.1 PM851 is added 3BSE 036 351 R101
3.0 PM865, PM861A, PM864A, BC810,
SM810, CI854A, CI858, CI860 and
SS823 are added.
3BSE 030 827 R201
2.1 PM864 is added. 3BSE 027 941 R301
2.1 CI855 and CI856 are added. 3BSE 027 941 R101
2.0 PM861and CI854/CI857 are added. 3BSE 026 020 R101
1.1 PM856 and CI852 are added. 3BSE 019 193 R201
1.0 Initial AC 800M release. 3BSE 019 193 R101

CCON-23 10000110155 工控自动化控制卡