6SM37S-6.000 6SM 37S-6.000 伺服电动机 Kollmorgen

6SM37S-6.000 6SM 37S-6.000 伺服电动机 Kollmorgen
t（窗口）
以下过程描述了Windows的基本打印过程。
1.从软件程序中选择打印选项。
2.从打印机列表中选择打印机。要更改设置，请单击“属性”或“项”按钮
打开打印驱动程序。
注：按钮的名称因不同软件程序而异。
注意：要从Windows 8或8.1启动屏幕应用程序访问这些功能，请选择设备，选择打印，
然后选择打印机。
注意：有关详细信息，请单击帮助（？）打印驱动程序中的按钮。
注意：打印驱动程序可能与此处显示的不同，但步骤相同。
544章印刷版
3.单击打印驱动程序中的选项卡以配置可用选项。例如，将纸张方向设置为
“完成”选项卡，并在纸张上设置纸张来源、纸张类型、纸张大小和质量设置/
质量选项卡。
4.单击确定按钮返回打印对话框。从该屏幕选择要打印的份数。
5.单击打印按钮打印作业。
ENWW打印任务（Windows）55
双面自动打印（窗口）
对于安装了自动双工器的打印机，请使用此步骤。如果打印机没有
安装了自动双工器，或要在双工器不支持的纸张类型上打印，请双面打印
手动。
1.从软件程序中选择打印选项。
2.从打印机列表中选择打印机，然后单击“属性”或“项”按钮打开
打印驱动程序。
注：按钮的名称因不同软件程序而异。
注意：要从Windows 8或8.1启动屏幕应用程序访问这些功能，请选择设备，选择打印，
然后选择打印机。
3.单击“完成”选项卡。
4.选择双面打印。单击“确定”关闭“文档属性”对话框。
5.在打印对话框中，单击打印以打印作业。
双面手动打印（窗口）
对于未安装自动双工器的打印机，或要在
双工器不支持。
1.从软件程序中选择打印选项。
2.从打印机列表中选择打印机，然后单击“属性”或“项”按钮打开
打印驱动程序。
注：按钮的名称因不同软件程序而异。
注意：要从Windows 8或8.1启动屏幕应用程序访问这些功能，请选择设备，选择打印，
然后选择打印机。
3.单击“完成”选项卡。
4.选择“双面打印”（手动），然后单击“确定”关闭“文档属性”对话框。
5.在打印对话框中，单击打印以打印作业的一面。
6.从输出箱中取出打印纸堆，并将其放入托盘1。
7.如果出现提示，触摸相应的控制面板按钮继续。
564章印刷版
每页打印多页（Windows）
1.从软件程序中选择打印选项。
2.从打印机列表中选择打印机，然后单击“属性”或“项”按钮打开
打印驱动程序。
注：按钮的名称因不同软件程序而异。
注意：要从Windows 8或8.1启动屏幕应用程序访问这些功能，请选择设备，选择打印，
然后选择打印机。
3.单击“完成”选项卡。
4.从“每页”下拉列表中选择每页的页数。
5.选择正确的打印页面边框、页面顺序和方向选项。单击“确定”关闭文档
属性对话框。
6.在打印对话框中，单击打印以打印作业。
选择纸张类型（Windows）
1.从软件程序中选择打印选项。
2.从打印机列表中选择打印机，然后单击“属性”或“项”按钮打开
打印驱动程序。
注：按钮的名称因不同软件程序而异。
注意：要从Windows 8或8.1启动屏幕应用程序访问这些功能，请选择设备，选择打印，
然后选择打印机。
3.单击纸张/质量选项卡。
4.从“纸张类型”下拉列表中，选择“更多…”选项。
5.展开类型为：选项的列表。
6.扩展能描述您论文的纸张类型类别。
7.选择您正在使用的纸张类型的选项，然后单击“确定”。
8.单击“确定”关闭“文档属性”对话框。在打印对话框中，单击打印以打印作业。
如果需要配置托盘，打印机控制面板上会显示托盘配置消息。
9.将指定类型和尺寸的纸张装入纸盘，然后关闭纸盘。
10.触摸确定按钮以接受检测到的类型和尺寸，或触摸修改按钮以选择一个差异
纸张大小或类型。
11.选择正确的类型和尺寸，然后触摸确定按钮
6SM37S-6.000 6SM 37S-6.000 伺服电动机 Kollmorgen

6SM37S-6.000 6SM 37S-6.000 伺服电动机 Kollmorgen
t (Windows)
The following procedure describes the basic printing process for Windows.
1. From the software program, select the Print option.
2. Select the printer from the list of printers. To change settings, click the Properties or Preferences button to
open the print driver.
NOTE: The name of the button varies for diƫerent software programs.
NOTE: To access these features from a Windows 8 or 8.1 Start screen app, select Devices, select Print,
and then select the printer.
NOTE: For more information, click the Help (?) button in the print driver.
NOTE: The print driver might look diƫerent than what is shown here, but the steps are the same.
54 Chapter 4 Print ENWW
3. Clickthe tabs in the print driver to conƭgure the available options. For example, set the paper orientation on
the Finishing tab, and set the paper source, paper type, paper size, and quality settings on the Paper/
Quality tab.
4. Click the OK button to return to the Print dialog box. Select the number of copies to print from this screen.
5. Click the Print button to print the job.
ENWW Print tasks (Windows) 55
Automatically print on both sides (Windows)
Use this procedure for printers that have an automatic duplexer installed. If the printer does not have an
automatic duplexer installed, or to print on paper types that the duplexer does not support, print on both sides
manually.
1. From the software program, select the Print option.
2. Select the printer from the list of printers, and then click the Properties or Preferences button to open the
print driver.
NOTE: The name of the button varies for diƫerent software programs.
NOTE: To access these features from a Windows 8 or 8.1 Start screen app, select Devices, select Print,
and then select the printer.
3. Click the Finishing tab.
4. Select Print on both sides. Click OK to close the Document Properties dialog.
5. In the Print dialog, click Print to print the job.
Manually print on both sides (Windows)
Use this procedure for printers that do not have an automatic duplexer installed or to print on paper that the
duplexer does not support.
1. From the software program, select the Print option.
2. Select the printer from the list of printers, and then click the Properties or Preferences button to open the
print driver.
NOTE: The name of the button varies for diƫerent software programs.
NOTE: To access these features from a Windows 8 or 8.1 Start screen app, select Devices, select Print,
and then select the printer.
3. Click the Finishing tab.
4. Select Print on both sides (manually), and then click OK to close the Document Properties dialog.
5. In the Print dialog, click Print to print the ƭrst side of the job.
6. Retrieve the printed stack from the output bin, and place it in Tray 1.
7. If prompted, touch the appropriate control panel button to continue.
56 Chapter 4 Print ENWW
Print multiple pages per sheet (Windows)
1. From the software program, select the Print option.
2. Select the printer from the list of printers, and then click the Properties or Preferences button to open the
print driver.
NOTE: The name of the button varies for diƫerent software programs.
NOTE: To access these features from a Windows 8 or 8.1 Start screen app, select Devices, select Print,
and then select the printer.
3. Click the Finishing tab.
4. Select the number of pages per sheet from the Pages per sheet drop-down.
5. Select the correct Print page borders, Page order, and Orientation options. Click OK to close the Document
Properties dialog.
6. In the Print dialog, click Print to print the job.
Select the paper type (Windows)
1. From the software program, select the Print option.
2. Select the printer from the list of printers, and then click the Properties or Preferences button to open the
print driver.
NOTE: The name of the button varies for diƫerent software programs.
NOTE: To access these features from a Windows 8 or 8.1 Start screen app, select Devices, select Print,
and then select the printer.
3. Click the Paper/Quality tab.
4. From the Paper type drop-down, select the More... option.
5. Expand the list of Type is: options.
6. Expand the category of paper types that best describes your paper.
7. Select the option for the type of paper you are using, and then click OK.
8. Click OK to close the Document Properties dialog. In the Print dialog, click Print to print the job.
If the tray needs to be conƭgured, a tray conƭguration message displays on the printer control panel.
9. Load the tray with the speciƭed type and size of paper, and then close the tray.
10. Touch the OK button to accept the detected type and size, or touch the Modify button to choose a diƫerent
paper size or type.
11. Select the correct type and size, and then touch the OK button
6SM37S-6.000 6SM 37S-6.000 伺服电动机 Kollmorgen