DI86-MU8/8 57775840E DI86-MU8 模拟量输入卡 ABB
is出版物包括危险、警告、警告和注释信息（如适用），以指出安全
相关或其他重要信息。
危险：可能导致严重人身伤害或死亡的危险
警告：可能导致人身伤害的危险
注意：可能导致设备或财产损坏的危险
注意：提醒用户注意相关事实和条件
尽管危险和警告危险与人身伤害有关，但警告危险与
设备或财产损坏，应理解，在某些操作条件下，损坏设备的操作可能
条件导致工艺性能下降，导致人身伤害或死亡。因此，完全遵守
危险、警告和注意事项。
商标
Pressductor®是ABB AB的注册商标。
通知
本文件中的信息如有变更，恕不另行通知，不应被解释为ABB AB的承诺。
ABB AB对本文件中可能出现的任何错误概不负责。
在任何情况下，ABB AB均不对任何性质或种类的直接、间接、特殊、附带或后果性损害负责
由于使用本文件而产生的，ABB AB也不对因使用本文件引起的附带或间接损害负责
本文件中描述的任何软件或硬件。
未经ABB AB书面许可，不得复制或复制本文件及其部分内容
不得将其传递给第三方，也不得用于任何未经授权的目的。
本文件中所述的软件是根据许可证提供的，只能根据以下要求使用、复制或披露：
根据该许可证的条款。
CE标记
张力电子PFEA113符合RoHS指令2011/65/EU、EMC指令中规定的要求
2014/30/EU和低压指令2014/35/EU，前提是按照
本用户手册第2章“安装”中给出的安装说明。
根据本标准，张力电子装置PFEA113满足美国和加拿大的安全认证要求
用于过程控制设备的UL61010C-1和编号为1010-1的CSA C22.2。证书编号为170304-E240621和
第240504-E240621号，前提是按照中给出的安装说明进行安装
第2章安装，包括在本用户手册中。
DI86-MU8/8 57775840E DI86-MU8 模拟量输入卡 ABB
DI86-MU8/8 57775840E DI86-MU8 模拟量输入卡 ABB
is publication includes, DANGER, WARNING, CAUTION and NOTE information where appropriate to point out safety
related or other important information.
DANGER Hazards which could result in severe personal injury or death
WARNING Hazards which could result in personal injury
CAUTION Hazards which could result in equipment or property damage
NOTE Alerts user to pertinent facts and conditions
Although DANGER and WARNING hazards are related to personal injury, and CAUTION hazards are associated with
equipment or property damage, it should be understood that operation of damaged equipment could, under certain operational
conditions, result in degraded process performance leading to personal injury or death. Therefore, comply fully with all
DANGER, WARNING, and CAUTION notices.
TRADEMARKS
Pressductor® is a registered trademark of ABB AB.
NOTICE
The information in this document is subject to change without notice and should not be construed as a commitment by ABB AB.
ABB AB assumes no responsibility for any errors that may appear in this document.
In no event shall ABB AB be liable for direct, indirect, special, incidental or consequential damages of any nature or kind
arising from the use of this document, nor shall ABB AB be liable for incidental or consequential damages arising from use of
any software or hardware described in this document.
This document and parts thereof must not be reproduced or copied without ABB AB’s written permission, and the contents
thereof must not be imparted to a third party nor be used for any unauthorized purpose.
The software described in this document is furnished under a license and may be used, copied, or disclosed only in accordance
with the terms of such license.
CE-MARKING
The Tension Electronics PFEA113 fulfills the requirements as stated in the RoHS Directive 2011/65/EU, EMC Directive
2014/30/EU and Low Voltage Directive 2014/35/EU, provided that the installation is carried out in accordance with the
installation instructions given in Chapter 2 Installation, included in this User Manual.
The Tension Electronics PFEA113 fulfills the requirements of safety approval for USA and Canada according to the standard
UL61010C-1 for Process Control Equipment and CSA C22.2 No. 1010-1. Certificate No. 170304-E240621 and
No. 240504-E240621, provided that the installation is carried out in accordance with the installation instructions given in
Chapter 2 Installation, included in this User Manual.
DI86-MU8/8 57775840E DI86-MU8 模拟量输入卡 ABB
