OCAH 940181103 电路板
EF615是专用馈线IED（智能电子设备），设计用于：
公用变电站的保护、控制、测量和监督
工业电力系统，包括放射状、环状和网状配电网络
具有或不具有分布式发电。REF615是ABB的成员
Relion®产品系列及其615保护和控制产品系列的一部分。
615系列IED的特点是紧凑和可抽出装置
设计
615系列从头开始重新设计，旨在释放
IEC 61850通信和互操作性标准的全部潜力
变电站自动化设备之间。
IED为以下区域的架空线路和电缆馈线提供主要保护：
分销网络。IED还用作应用中的后备保护，
其中需要独立和冗余的保护系统。
根据选择的标准配置，IED适用于
架空线路和电缆馈线的隔离中性点保护，电阻接地，
补偿和可靠接地网络。一旦标准配置IED
已给定应用程序特定设置，可以直接投入使用。
615系列IED支持一系列通信协议，包括IEC
61850具有GOOSE消息、IEC 60870-5-103、Modbus®和DNP3。
1MRS756378 K第2节
参考文献615概述
参考文献615 11
应用手册
2.1.1产品版本历史
产品版本产品历史
1.0产品发布
1.1•IRIG-B
•增加了对并行协议的支持：IEC 61850和Modbus
•X130生物添加：可选用于变体B和D
•CB联锁功能增强
•硬件中的TCS功能增强
•增加了非易失性存储器
2.0•支持DNP3串行或TCP/IP
•支持IEC 60870-5-103
•电压测量和保护
•功率和能量测量
•新的标准配置E和F
•通过WHMI上传干扰记录器
•保险丝故障监控
3.0•新配置G和H
•增加配置A、B、E和F
•应用程序可配置性支持
•模拟GOOSE支持
•带有单线图的大显示屏
•增强的机械设计
•增加了事件和故障记录的大数量
•基于导纳的接地故障保护
•频率测量和保护
•同步和通电检查
•组合传感器输入
•多端口以太网选项
4.0•新配置J
•配置A-H的添加/更改
•双光纤以太网通信选项（COM0032）
•通用控制点（SPCGGIO）功能块
•其他逻辑块
•SLD的按钮对象
•SLD的可控隔离开关和接地开关对象
•基于功率计量的E/F
•基于E/F的谐波
•电能质量功能
•增加了事件和故障记录的大数量
2.1.2 PCM600和IED连接包版本
•保护和控制IED管理器PCM600版本2.4 SP1或更高版本
•REF615连接包4.0版或更高版本
•参数设置 OCAH 940181103 电路板
 OCAH 940181103 电路板
EF615 is a dedicated feeder IED (intelligent electronic device) designed for the
protection, control, measurement and supervision of utility substations and
industrial power systems including radial, looped and meshed distribution networks
with or without distributed power generation. REF615 is a member of ABB’s
Relion® product family and part of its 615 protection and control product series.
The 615 series IEDs are characterized by their compactness and withdrawable-unit
design.
Re-engineered from the ground up, the 615 series has been designed to unleash the
full potential of the IEC 61850 standard for communication and interoperability
between substation automation devices.
The IED provides main protection for overhead lines and cable feeders in
distribution networks. The IED is also used as back-up protection in applications,
where an independent and redundant protection system is required.
Depending on the chosen standard configuration, the IED is adapted for the
protection of overhead line and cable feeders in isolated neutral, resistance earthed,
compensated and solidly earthed networks. Once the standard configuration IED
has been given the application-specific settings, it can directly be put into service.
The 615 series IEDs support a range of communication protocols including IEC
61850 with GOOSE messaging, IEC 60870-5-103, Modbus® and DNP3.
1MRS756378 K Section 2
REF615 overview
REF615 11
Application Manual
2.1.1 Product version history
Product version Product history
1.0 Product released
1.1 • IRIG-B
• Support for parallel protocols added: IEC 61850 and Modbus
• X130 BIO added: optional for variants B and D
• CB interlocking functionality enhanced
• TCS functionality in HW enhanced
• Non-volatile memory added
2.0 • Support for DNP3 serial or TCP/IP
• Support for IEC 60870-5-103
• Voltage measurement and protection
• Power and energy measurement
• New standard configurations E and F
• Disturbance recorder upload via WHMI
• Fuse failure supervision
3.0 • New configurations G and H
• Additions to configurations A, B, E and F
• Application configurability support
• Analog GOOSE support
• Large display with single line diagram
• Enhanced mechanical design
• Increased maximum amount of events and fault records
• Admittance-based earth-fault protection
• Frequency measurement and protection
• Synchronism and energizing check
• Combi sensor inputs
• Multi-port Ethernet option
4.0 • New configuration J
• Additions/changes for configurations A-H
• Dual fibre optic Ethernet communication option (COM0032)
• Generic control point (SPCGGIO) function blocks
• Additional logic blocks
• Button object for SLD
• Controllable disconnector and earth switch objects for SLD
• Wattmetric based E/F
• Harmonics based E/F
• Power Quality functions
• Increased maximum amount of events and fault records
2.1.2 PCM600 and IED connectivity package version
• Protection and Control IED Manager PCM600 Ver. 2.4 SP1 or later
• REF615 Connectivity Package Ver. 4.0 or later
• Parameter Setting | | |
