PP825 3BSE042240R1 触摸屏全供应PLC系统
保护功能块是功能图的一部分。它们被识别
基于其IEC 61850名称，但基于IEC的符号和ANSI功能
数字也包括在内。使用了一些功能块，如PHHPTOC
在配置中多次。为了将模块彼此分开，IEC
61850名称、IEC符号和ANSI功能编号附加有运行
数字，即实例编号，从1开始。如果块没有后缀
在IEC或ANSI符号之后，
仅实例化一次。IED的内部功能和外部
连接用虚线分隔，虚线表示IED的物理外壳。
信号矩阵和应用程序配置
通过PCM600中的信号矩阵和应用程序配置，可以
根据实际需要修改标准配置。简易爆炸装置是
出厂时带有功能中所述的默认连接
二进制输入、二进制输出、函数对函数连接和
报警LED。信号矩阵用于GOOSE信号输入工程和
用于在物理I/O信号和函数之间进行交叉引用
阻碍。信号矩阵工具不能用于添加或删除功能
例如，GOOSE接收功能块。应用程序
配置工具用于此类操作。如果功能块是
与应用程序配置一起删除，功能相关数据将从
菜单以及61850数据模型中的菜单，除了一些基本
功能块是强制性的，因此不能从IED中删除
通过从应用程序配置中删除它们进行配置。
第3节1MRS756378 K
REF615标准配置
36参考文献615
应用手册
3.4标准配置A
3.4.1应用
非定向过流和定向的标准配置
接地故障保护主要用于电缆和架空线路馈线
隔离和谐振接地配电网的应用。这个
配置还包括选择接地故障保护的附加选项
基于导纳或瓦特计原理。
默认情况下，具有标准配置的IED从工厂交付
设置和参数。终端用户在传入、传出和
IED内的内部信号指定使该配置更进一步
适用于不同的主电路布局和相关功能需求
使用PCM600修改内部功能。
3.4.2功能
表10：标准配置A中包含的功能
功能IEC 61850 IEC 60617 IEC-ANSI
保护
三相无方向过电流
保护，低级，实例1 PHLPTOC1 3I>（1）51P-1（1）
三相无方向过电流
保护，级，实例1 PHHPTOC1 3I>>（1）51P-2（1）
三相无方向过电流
保护，级，实例2 PHHPTOC2 3I>>（2）51P-2（2）
三相无方向过电流
保护，瞬时级，实例1 PHIPTOC1 3I>>>（1）50P/51P（1）
定向接地故障保护，低级，
实例1 DEFLPDEF1 Io>->（1）67N-1（1）
定向接地故障保护，低级，
实例2 DEFLPDEF2 Io>->（2）67N-1（2）
定向接地故障保护，级DEFHPDEF1 Io>->67N-2
基于导纳的接地故障保护，
实例1 EFPADM1 Yo>->（1）21YN（1）
基于导纳的接地故障保护，
实例2 EFPADM2 Yo>->（2）21YN（2）
基于导纳的接地故障保护，
实例3 EFPADM3 Yo>->（3）21YN（3）
基于瓦特计的接地故障保护，
实例1 WPWDE1 Po>->（1）32N（1）
基于瓦特计的接地故障保护，
实例2 WPWDE2 Po>->（2）32N（2）
基于瓦特计的接地故障保护，
实例3 WPWDE3 Po>->（3）32N（3）
瞬态/间歇性接地故障保护INTRPTEF1 Io>->IEF 67NIEF
下一页续表
1MRS756378 K第3节
REF615标准配置
参考文献615:37
应用手册
功能IEC 61850 IEC 60617 IEC-ANSI
非定向（越野）接地故障
保护，使用计算Io EFHPTOC1 Io>>（1）51N-2（1）
负序过电流保护，
实例1 NSPTOC1 I2>（1）46（1）
负序过电流保护，
实例2 NSPTOC2 I2>（2）46（2）
相位不连续保护PDNSPTOC1 I2/I1＞46PD
剩余过电压保护，例如1 ROVPTOV1 Uo>（1）59G（1）
剩余过电压保护，例如2 ROVPTOV2 Uo>（2）59G（2）
剩余过电压保护，例如3 ROVPTOV3 Uo>（3）59G（3）
馈线的三相热保护，
电缆和配电变压器T1PTTR1 3th>F 49F
断路器故障保护CCBRBRF1 3I>/Io>BF 51BF/51NBF
三相涌流检测器INRPHAR1 3I2f>68
主跳闸，实例1 TRPPTRC1主跳闸（1）94/86（1）
主跳闸，实例2 TRPPTRC2主跳闸（2）94/86（2）
电弧保护，实例1电弧电弧1电弧（1 PP825 3BSE042240R1 触摸屏全供应PLC系统
 PP825 3BSE042240R1 触摸屏全供应PLC系统
Protection function blocks are part of the functional diagram. They are identified
based on their IEC 61850 name but the IEC based symbol and the ANSI function
number are also included. Some function blocks, such as PHHPTOC, are used
several times in the configuration. To separate the blocks from each other, the IEC
61850 name, IEC symbol and ANSI function number are appended with a running
number, that is an instance number, from one upwards. If the block has no suffix
after the IEC or ANSI symbol, the function block has been used, that is,
instantiated, only once. The IED’s internal functionality and the external
connections are separated with a dashed line presenting the IED’s physical casing.
Signal Matrix and Application Configuration
With Signal Matrix and Application Configuration in PCM600, it is possible to
modify the standard configuration according to the actual needs. The IED is
delivered from the factory with default connections described in the functional
diagrams for binary inputs, binary outputs, function-to-function connections and
alarm LEDs. The Signal Matrix is used for GOOSE signal input engineering and
for making cross-references between the physical I/O signals and the function
blocks. The Signal Matrix tool cannot be used for adding or removing function
blocks, for example, GOOSE receive function blocks. The Application
Configuration tool is used for these kind of operations. If a function block is
removed with Application Configuration, the function related data disappears from
the menus as well as from the 61850 data model, with the exception of some basic
function blocks, which are mandatory and thus cannot be removed from the IED
configuration by removing them from the Application Configuration.
Section 3 1MRS756378 K
REF615 standard configurations
36 REF615
Application Manual
3.4 Standard configuration A
3.4.1 Applications
The standard configuration for non-directional overcurrent and directional
earthfault protection is mainly intended for cable and overhead-line feeder
applications in isolated and resonant-earthed distribution networks. The
configuration also includes additional options to select earth-fault protection based
on admittance or wattmetric based principle.
The IED with a standard configuration is delivered from the factory with default
settings and parameters. The end-user flexibility for incoming, outgoing and
internal signal designation within the IED enables this configuration to be further
adapted to different primary circuit layouts and the related functionality needs by
modifying the internal functionality using PCM600.
3.4.2 Functions
Table 10: Functions included in the standard configuration A
Function IEC 61850 IEC 60617 IEC-ANSI
Protection
Three-phase non-directional overcurrent
protection, low stage, instance 1 PHLPTOC1 3I> (1) 51P-1 (1)
Three-phase non-directional overcurrent
protection, high stage, instance 1 PHHPTOC1 3I>> (1) 51P-2 (1)
Three-phase non-directional overcurrent
protection, high stage, instance 2 PHHPTOC2 3I>> (2) 51P-2 (2)
Three-phase non-directional overcurrent
protection, instantaneous stage, instance 1 PHIPTOC1 3I>>> (1) 50P/51P (1)
Directional earth-fault protection, low stage,
instance 1 DEFLPDEF1 Io> -> (1) 67N-1 (1)
Directional earth-fault protection, low stage,
instance 2 DEFLPDEF2 Io> -> (2) 67N-1 (2)
Directional earth-fault protection, high stage DEFHPDEF1 Io>> -> 67N-2
Admittance based earth-fault protection,
instance 1 EFPADM1 Yo> -> (1) 21YN (1)
Admittance based earth-fault protection,
instance 2 EFPADM2 Yo> -> (2) 21YN (2)
Admittance based earth-fault protection,
instance 3 EFPADM3 Yo> -> (3) 21YN (3)
Wattmetric based earth-fault protection,
instance 1 WPWDE1 Po> -> (1) 32N (1)
Wattmetric based earth-fault protection,
instance 2 WPWDE2 Po> -> (2) 32N (2)
Wattmetric based earth-fault protection,
instance 3 WPWDE3 Po> -> (3) 32N (3)
Transient / intermittent earth-fault protection INTRPTEF1 Io> -> IEF 67NIEF
Table continues on next page
1MRS756378 K Section 3
REF615 standard configurations
REF615 37
Application Manual
Function IEC 61850 IEC 60617 IEC-ANSI
Non-directional (cross-country) earth fault
protection, using calculated Io EFHPTOC1 Io>> (1) 51N-2 (1)
Negative-sequence overcurrent protection,
instance 1 NSPTOC1 I2> (1) 46 (1)
Negative-sequence overcurrent protection,
instance 2 NSPTOC2 I2> (2) 46 (2)
Phase discontinuity protection PDNSPTOC1 I2/I1> 46PD
Residual overvoltage protection, instance 1 ROVPTOV1 Uo> (1) 59G (1)
Residual overvoltage protection, instance 2 ROVPTOV2 Uo> (2) 59G (2)
Residual overvoltage protection, instance 3 ROVPTOV3 Uo> (3) 59G (3)
Three-phase thermal protection for feeders,
cables and distribution transformers T1PTTR1 3Ith>F 49F
Circuit breaker failure protection CCBRBRF1 3I>/Io>BF 51BF/51NBF
Three-phase inrush detector INRPHAR1 3I2f> 68
Master trip, instance 1 TRPPTRC1 Master Trip (1) 94/86 (1)
Master trip, instance 2 TRPPTRC2 Master Trip (2) 94/86 (2)
Arc protection, instance 1 ARCSARC1 ARC (1) 50L/50NL (1)
Arc protection, instance 2 ARCSARC2 ARC (2) 50L/50NL (2)
Arc protection, instance 3 ARCSARC3 ARC (3) 50L/50NL (3)
Control
Circuit-breaker control CBXCBR1 I <-> O CB I <-> O CB
Auto-reclosing DARREC1 O -> I 79
Condition Monitoring
Trip circuit supervision, instance 1 TCSSCBR1 TCS (1) TCM (1)
Trip circuit supervision, instance 2 TCSSCBR2 TCS (2) TCM (2)
Measurement
Disturbance recorder RDRE1 - -
Three-phase current measurement, instance 1 CMMXU1 3I 3I
Sequence current measurement CSMSQI1 I1, I2, I0 I1, I2, I0
Residual current measurement, instance 1 RESCMMXU1 Io In
Residual voltage measurement RESVMMXU1 Uo Vn | PP825 3BSE042240R1 触摸屏全供应PLC系统 | | | |
