欢迎访问瑞昌明盛自动化设备有限公司官网!
关于我们 | 联系我们

+86 15270269218

您的位置:首页>>产品中心 >> foxboro

9487-47B1319210000 模块备件

型号: 9487-47B1319210000  分类: foxboro
  • 9487-47B1319210000
  • 9487-47B1319210000
  • 9487-47B1319210000
  • 9487-47B1319210000
  • 9487-47B1319210000


产品标题:9487-47B1319210000 控制器连接控制终端显示屏 XYCOM

产品参数:

型号:9487-47B1319210000 

原产地:美国

质保:七天验收期,质保期一年

品牌:  XYCOM

产品图片展示
9487-47B1319210000  模块备件
 

产品详情资料
C绝缘和is额定电压为300 V时80°C(0至176°F)(UL额定CL2型)。这个NKAS11电缆具有非PVC绝缘,额定温度为90°C
(0至194°F)和300 V(UL额定PLTC型)。
注:图A-4中的示例是版本为B的NTAI06终端装置硬件电流4至20 mA,外部或系统供电三线电阻式温度检测器电阻范围:0至500!RTD:10100120!中国53!(三线制)表A-2.NTAI06跳线配置输入类型跳线编号
J1-J32 J33-J48 J49-J64单端电压1-2 1-2 2-3差分电压1-21-21-2系统电源为4至20 mA 2-3 2-3,2-3外部供电4至20 mA 1-2 2-3 1-2三线电阻式温度检测器1-2 1-2注:图A-3中列出了每个输入通道使用的跳线和端子分配。表A-1.NTAI06输入类型(续)输入类型信号类表A-3.NTAI06输入类型说明输入类型输入描述单端电压此跳线配置将负(-)输入端子连接到I/O COM onNTAI06。IMASI13测量正(+)输入端子的电压相对于C端子。不需要连接到C端子。差分电压:此跳线配置将正(+)和负(-)输入直接连接到IMASI13差分输入。信道到信道和信道到系统信号对所有电压输入类型实现隔离,毫伏和热电偶。不需要连接到C端子
C insulation and israted for 80° C (0 to 176° F) at 300 V (UL rated type CL2). TheNKAS11 cable has non-PVC insulation and is rated for 90° C(0 to 194° F) at 300 V (UL rated type PLTC).NOTE: The example in Figure A-4 is an NTAI06 termination unit with revision Bhardware.Current 4 to 20 mA, external or system powered3-wire RTD Resistance range: 0 to 500 !
RTDs: 10, 100, 120 !
Chinese 53 ! (3-wire)Table A-2. NTAI06 Jumper ConfigurationsInput Type Jumper NumberJ1 - J32 J33 - J48 J49 - J64Single-ended voltage 1 - 2 1 - 2 2 - 3Differential voltage 1 - 2 1 - 2 1 - 2System powered 4 to 20 mA 2 - 3 2 - 3 2 - 3External powered 4 to 20mA 1 - 2 2 - 3 1 - 23-wire RTD 1 - 2 1 - 2 1 - 2NOTE: Jumpers used by each input channel are listed with the terminal assignments in Figure A-3.Table A-1. NTAI06 Input Types (continued)Input Type Signal TypeTable A-3. NTAI06 Input Type DescriptionsInput Type Input DescriptionSingle-endedvoltageThis jumperconfiguration connects the minus (-) input terminal to I/O COM onthe NTAI06. The IMASI13 measures the voltage at the plus(+) inputterminalwith respect to the C terminal. No connection to the C terminal is necessary.Differential voltage This jumper configuration connects the plus (+) and minus (-) inputs directly toIMASI13 differential input. Channel to channel and channel to system signalisolation is achieved for all voltage input types, including high level voltage,millivolts and thermocouples. No connection to the C terminal is necessary

主营产品简介
专注于DCSPLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件,控制器,触摸屏,伺服驱动器。

优势:供应进口原装正品,专业停产配件,

发货快,货期精准,

主营品牌包括 ABB贝利、GE/FUANCFOXBORO、英维思TRICONEX 、本特利BENTLYA-B罗克韦尔、艾默生EMERSON OVATIONMOTOROLAXYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTHKUKANIDEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOGPROSOFT等品牌

 

 

 



更多
查看更多 >>

推荐产品