CP345 STYLE S1 CP34 5-S1模块备件

产品标题：YOKOGAWA 处理器板模块 CP345 STYLE S1 CP345-S1

型号： CP345 STYLE S1 CP345-S1

质保：七天验收期，质保期一年

品牌：YOKOGAWA 

产品图片展示

产品详情资料

 
PanelView Plus终端USB端口的电路参数如中所示
表1.USB外围设备及其相关电缆应具有电路
具有表2中给出的限值的参数保持不易燃
与PanelView Plus终端USB端口一起使用时。如果电缆电容和
电感未知。ANSI/ISA-RP中的以下值：
12.06.01-2003可用于：
C电缆=197pF/m（60 pF/ft）
Lcable=0.7µH/m（0.20µH/英尺）
非易燃现场接线必须按照
国家电气规范（NEC）、ANSI/NFPA 70或其他
适用的地方规范。
未对相关非易燃现场接线装置进行评估
与其他相关的非易燃现场接线设备结合使用。
符号定义
主机USB端口的Voc开路电压。
主机USB端口的Isc大输出电流。
Vmax USB外围设备的大施加电压额定值。
Vmax应大于或等于表1中的Voc（Vmax Voc）。
Imax USB外围设备可承受的大电流。
Imax应大于或等于表1中的Isc（Imax Isc）。
Ci USB外围设备的大内部电容。
Ca USB外围设备及其相关电缆的大允许电容。这个
Ci之和
USB外围设备的C电缆和相关电缆的C电缆应小于
大于或等于Ca（Ci
+无可挑剔Ca）。
Li USB外围设备的大内部电感。
La USB外围设备及其相关电缆的大允许电感。这个
李和
USB外围设备和相关电缆的Lcable应小于
或等于La（Li
+生命La）。
32罗克韦尔自动化出版物2711P-UM001K-EN-P-2020年2月
二章安装
环境和围墙
有关更多机柜和认证信息，请参阅PanelView
Plus/PanelView Plus CE户外高亮度显示模块安装
说明书，出版物2711P-IN026。
室外安装
高亮度显示器
使用高亮度显示模块时，cat。2711P-RDT12H号，室外，
大化前挡板和显示器的现场寿命的考虑因素包括：
 选择合适的外壳。
 终端的方向。
紫外线和红外线辐射都会降低任何电子器件的场寿命
装置虽然端子边框中使用的材料提供了较长的场寿命
正确安装可延长使用寿命。
来自太阳的紫外线辐射导致所有塑料褪色或变黄
随着时间的推移，它会变脆。使用防眩光覆盖，cat。编号2711P-RGT12，将保护
终端的正面直接暴露于紫外线辐射，并大大
增加其场寿命。
注意：本设备用于污染等级为2的工业环境，
在II类过电压应用中（如IEC 60664-1所定义），在海拔高度
至2000米（6561英尺），无需降额。
这些端子用于可编程逻辑控制器。终端
交流供电的电源必须连接到隔离系统的次级
变压器直流2级供电的端子可由
与指定保险丝套件一起使用时，隔离直流电源。
该设备被视为1组A类工业设备，根据
IEC/CISPR 11.如果没有适当的预防措施，可能难以确保
电磁兼容性The circuit parameters of the PanelView Plus terminal USB port are given in
Table 1. The USB peripheral device and its associated cabling shall have circuit
parameters with the limits given in Table 2 for them to remain nonincendive
when used with the PanelView Plus terminal USB port. If cable capacitance and
inductance are not known the following values from ANSI/ISA-RP
12.06.01-2003 may be used:
Ccable = 197pF/m (60 pF/ft)
Lcable = 0.7 µH/m (0.20 µH/ft)
Nonincendive field wiring must be wired and separated in accordance with
501.10(B)(3) of the National Electrical Code (NEC) ANSI/NFPA 70 or other
local codes as applicable.
This associated nonincendive field wiring apparatus has not been evaluated for
use in combination with another associated nonincendive field wiring apparatus.
Symbol Definitions
Voc Open circuit voltage of the host USB port.
Isc Maximum output current of the host USB port.
Vmax Maximum applied voltage rating of the USB peripheral device.
Vmax shall be greater than or equal to Voc in Table 1. (Vmax  Voc ).
Imax Maximum current to which the USB peripheral device can be subjected.
Imax shall be greater than or equal to Isc in Table 1. (Imax  Isc).
Ci Maximum internal capacitance of the USB peripheral device.
Ca Maximum allowed capacitance of the USB peripheral device and its associated cable. The
sum of Ci
 of the USB peripheral device and Ccable of the associated cable shall be less
than or equal to Ca . (Ci
 + Ccable Ca).
Li Maximum internal inductance of the USB peripheral device.
La Maximum allowed inductance of the USB peripheral device and its associated cable. The
sum of Li
 of the USB peripheral device and Lcable of the associated cable shall be less than
or equal to La . (Li
 + Lcable La).
32 Rockwell Automation Publication 2711P-UM001K-EN-P - February 2020
Chapter 2 Installation
Environment and Enclosure
For more enclosure and certification information, refer to the PanelView
Plus/PanelView Plus CE Outdoor High-bright Display Modules Installation
Instructions, publication 2711P-IN026.
Outdoor Installation for
High-bright Displays
When using the high-bright display module, cat. no. 2711P-RDT12H, outdoors,
considerations in maximizing the field life of the front bezel and display are:
 selecting the proper enclosure.
 orientation of the terminal.
Both ultraviolet and infrared radiation can reduce the field life of any electronic
device. While the materials used in the terminal bezels provide long field life, that
life can be extended by proper installation.
Ultraviolet radiation from the sun causes all plastics to fade or yellow and become
brittle over time. Using an antiglare overlay, cat. no. 2711P-RGT12, will protect
the front of the terminal from direct exposure to UV radiation and greatly
increase its field life.
ATTENTION This equipment is intended for use in a Pollution Degree 2 industrial environment,
in overvoltage Category II applications (as defined in IEC 60664-1), at altitudes up
to 2000 m (6561 ft) without derating.
The terminals are intended for use with programmable logic controllers. Terminals
that are AC powered must be connected to the secondary of an isolating
transformer. Terminals that are DC Class 2 powered may be supplied from an
isolated DC source when used with the indicated fuse kit.
This equipment is considered Group 1, Class A industrial equipment according to
IEC/CISPR 11. Without appropriate precautions, there may be difficulties ensuring
electromagnetic compatibi

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌