欢迎访问瑞昌明盛自动化设备有限公司官网!
关于我们 | 联系我们

+86 15270269218

您的位置:首页>>产品中心 >> foxboro

CHA-50A-50-H-C1024-B 控制PLC减速机控制器

型号: CHA-50A-50-H-C1024-B  分类: foxboro
  • CHA-50A-50-H-C1024-B
  • CHA-50A-50-H-C1024-B
  • CHA-50A-50-H-C1024-B
  • CHA-50A-50-H-C1024-B
  • CHA-50A-50-H-C1024-B


产品标题:AN-X2-AB-DHRIO 技术网关以太网模块数据高速模块 ProSoft

型号:AN-X2-AB-DHRIO 技术网关以太网模块数据高速模块 
品牌: ProSoft

质保:七天验收期,质保期年

发货期:1-3个工作日

 

产品图片展示

CHA-50A-50-H-C1024-B 控制PLC减速机控制器

产品详情资料

hernet集线器(无中继器或光纤)长100米(328英尺)。有关更多信息,请参阅
参见以太网/IP媒体规划和安装手册,出版物ENET-IN001。
故障排除
如果终端工作不正常,请检查电源、状态指示灯和显示设置。
有关其他故障排除技术,请参阅以下用户手册:
•PanelView Plus终端用户手册,出版物2711P-UM001
•PanelView Plus 6终端用户手册,出版物2711P-UM006
检查电源是否充足
接收不到足够电力的终端可能会导致不可预测的行为。核实
规格表中的功率要求。
检查状态指示器
终端有两个状态指示器,用于隔离操作问题。
•通信指示灯(绿色)
•硬件故障的故障指示灯(红色)
当终端启动时,故障指示灯应熄灭,但有几次短暂闪烁,并且
通信指示灯亮。如果指示灯保持熄灭,则电源或逻辑模块出现故障。
检查电源线。如果电源不在范围内,更换电源。如果功率是
在范围内,更换逻辑模块。成功启动后,两个指示灯均关闭
由终端上运行的应用程序控制。hernet hub (without repeaters or fiber) is 100 m (328 ft). For additional information, refer
to the EtherNet/IP Media Planning and Installation Manual, publication ENET-IN001.
Troubleshooting
If the terminal is not operating correctly, check the power, status indicators, and display settings.
For additional troubleshooting techniques, see the following user manuals:
• PanelView Plus Terminals User Manual, publication 2711P-UM001
• PanelView Plus 6 Terminals User Manual, publication 2711P-UM006
Check for Adequate Power
A terminal that does not receive adequate power could cause unpredictable behavior. Verify the
power requirements in the Specifications table.
Check Status Indicators
The terminal has two status indicators to isolate operating problems.
• COMM indicator (green) for communication
• FAULT indicator (red) for hardware faults
When the terminal starts, the fault indicator should be off, except for a few brief flashes, and the
comm indicator on. If the indicators remain off, the power supply or logic module has failed.
Check the power cable. If the power is not within range, replace the power supply. If the power is
within range, replace the logic module. After a successful startup, both indicators are off and
controlled by the application running on the terminal.

主营产品简介
专注于DCSPLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件,控制器,触摸屏,伺服驱动器。

优势:供应进口原装正品,专业停产配件,

发货快,货期精准,

主营品牌包括 ABB贝利、GE/FUANCFOXBORO、英维思TRICONEX 、本特利BENTLYA-B罗克韦尔、艾默生EMERSON OVATIONMOTOROLAXYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTHKUKANIDEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOGPROSOFT等品牌

主营产品广泛应用于冶金、石油天然气、玻璃制造业、铝业、石油化工、煤矿、造纸印刷、纺织印染、机械、电子制造、汽车制造、烟草、塑胶机械、电力、水利、水处理/环保、市政工程、锅炉供暖、能源、输配电等等。

 

 



更多
查看更多 >>

推荐产品