CAN001 电源网 ZTEIL 24V DC 用于控制电压控制 SCHENCK

产品标题：CAN001 电源网 ZTEIL 24V DC 用于控制电压控制 SCHENCK

型号： CAN001 电源网 ZTEIL 24V DC 用于控制电压控制 

品牌： SCHENCK

质保：七天验收期，质保期一年
发货期：1-3个工作日

产品图片展示

产品详情资料

SDCS-POW-1板专为DCS 500设计
转换器模块和安装在电子支架上。该板用于所有类型的
与电流或电压无关的模块
范围
SDCS-POW-1在回扫配置中基于切换模式工作。它为SDCS-CON-1和所有
其他电子板。输入电压可以是
通过开关SW1选择230 V AC或
至115 V AC。下图显示了选择AC输入电压的说明
并且用于选择编码器电源电压。
如果SDCS-CON-1带有SDCS-IOB-1板，或
SDCS-CON-2（不带I/O板IOB-3）一起
当脉冲编码器用于速度测量时，增量编码器电源电压必须
通过跳线X5、X4和X3选择。SDCS-POW-1板设计用于DCS 500
转换器模块和安装在电子支架上。该板用于所有类型的
与电流或电压无关的模块
范围
SDCS-POW-1在回扫配置中基于切换模式工作。它为SDCS-CON-1和所有
其他电子板。输入电压可以是
通过开关SW1选择230 V AC或
至115 V AC。下图显示了选择AC输入电压的说明
并且用于选择编码器电源电压。
如果SDCS-CON-1带有SDCS-IOB-1板，或
SDCS-CON-2（不带I/O板IOB-3）一起
当脉冲编码器用于速度测量时，增量编码器电源电压必须
由跳线X5、X4和X3选择。The SDCS-POW-1 board is designed for DCS 500
converter modules and is mounted on the electronic support. This board is used for all types of
modules independant from current or voltage
range.
The SDCS-POW-1 works on a switched mode basis in fly back configuration. It generates all necessary DC voltages for the SDCS-CON-1 and all
other electronic boards. The input voltage can be
selected via the switch SW1 either to 230 V AC or
to 115 V AC. The following figure shows the instructions for the selection of the AC input voltage
and for the selection of the encoder supply voltage.
If an SDCS-CON-1 with SDCS-IOB-1 board, or an
SDCS-CON-2 (without I/O board IOB-3) together
with a pulse encoder is used for speed measurement, the incremental encoder supply voltage must
be selected by jumpers X5, X4 and X3.The SDCS-POW-1 board is designed for DCS 500
converter modules and is mounted on the electronic support. This board is used for all types of
modules independant from current or voltage
range.
The SDCS-POW-1 works on a switched mode basis in fly back configuration. It generates all necessary DC voltages for the SDCS-CON-1 and all
other electronic boards. The input voltage can be
selected via the switch SW1 either to 230 V AC or
to 115 V AC. The following figure shows the instructions for the selection of the AC input voltage
and for the selection of the encoder supply voltage.
If an SDCS-CON-1 with SDCS-IOB-1 board, or an
SDCS-CON-2 (without I/O board IOB-3) together
with a pulse encoder is used for speed measurement, the incremental encoder supply voltage must
be selected by jumpers X5, X4 and X3.

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌