




产品标题:Harmonic Drive 控制PLC减速机 CHM-40A-A-E16384-B-SP
型号: 控制PLC减速机 CHM-40A-A-E16384-B-SP
品牌:Harmonic Drive
质保:七天验收期,质保期一年
发货期:1-3个工作日
产品图片展示
产品详情资料
电源接口板用于C1型转换器模块。有两种不同的版本
正在使用中。所用类型为:500V电压下25 A、50 A和75 A转换器的SDCS-PIN-11-600 V电压下50 A变频器的SDCS PIN-12 SDCS-PIN-1x板包括:-点火脉冲电路和脉冲变压器-通过电流测量电枢电流
晶闸管保护用变压器缓冲电路(由RC电路和MOV元件组成)
图5.1/1 SDCS-PIN-1x板的布局交流和直流高欧姆电压测量-通过PTC测量散热器温度
传感器-额定电流定标,零电流检测
和HW类型编码-如果安装了SDCS-PIN-11连接板
在DCF50x-0025…0075/DCF60x-0025?0075中,电阻器R113、R116和R119不是
内置说明:如果此PCB用作DCF的备件,
然后电阻器R113/R116/R119(值=0 )
必须移除。
表5.1/1 SDCS-PIN-1x板的设置
DCS变频器由ABB配备
用作备件的板:
-默认值:所有跳线W10-W82均处于正常状态-确保正确的转换器类型相关设置板类型PIN 11 PIN 12电流互感器比率1500:1 1500:1 Max。额定电压[V]500 500 500 600额定电流[A]25 50 75 50W10 2Q=;4Q=←←←←W15零电流检测W17额定电流刻度W18额定电流刻度w80HW型编码W81 HW型编码器电源接口板用于DCS 500 C1和C2型转换器模块。使用的版本不同。所用类型为:-SDCS-PIN-21,用于100 A…350 A 500 V转换器-SDCS-PIN-22,用于450 A…520 A 500 V变频器➀- SDCS-PIN-23用于600 V 110 A…270 A转换器-SDCS-PIN-24用于600 V 450 A转换器➀- SDCS-PIN-25,用于500 V下的700 A转换器➀ 在这些板上,使用SDCS-PIR-21
电阻器R112、R114和R116在SDCS-PIN-23/24和所有其他带有0-电阻器的PIN板上安装MOV元件。SDCS-PIN-2x板包括:-带脉冲变压器的点火脉冲电路-电枢电流测量-晶闸管保护用缓冲电路包括RC电路和MOV元件)AC和DC高欧姆电压测量-额定电流标度,零电流检测
和HW电压类型编码
-散热器温度测量接口
图5.2/1 SDCS-PIN-2x板的布局。
带PTC传感器
-过电压保护和电压保险丝
测量
-如果SDCS-PIN-21/22连接板安装在DCF50x-0100…0520/DCF60x0100…10520中,则部件R112、R114
和R11 The power interface board is used for convertermodules model C1. There are 2 different versions
in use. The used types are:SDCS-PIN-11 for 25 A, 50 A and 75 A convertersat 500V- SDCS PIN-12 for 50 A converters at 600 VThe SDCS-PIN-1x boards consists of:- firing pulse circuits and pulse transformers- measurement of the armature current via current
transformers snubber circuit for thyristors protection(consists of RC circuits and MOV elements)
Fig. 5.1/1 Layout of the SDCS-PIN-1x board.- AC and DC high ohmic voltage measurement- heat sink temperature measurement via PTC
sensor- scaling for rated current, zero current detection
and HW type coding- If the SDCS-PIN-11 connection board is installed
in a DCF50x-0025...0075 / DCF60x-0025...0075,then the resistors R113, R116 and R119 are not
build-inNote:If this PCB is used as a spare part for a DCF.... ,
then the resistors R113/R116/R119 (value = 0 )
must be removed.
Table 5.1/1 Settings of the SDCS-PIN-1x board if a
DCS converter is equipped with it by ABB
Board used as a spare part:
- default: all jumpers W10-W82 arein condition- ensure the correct converter typerelated settingsBoard type PIN 11 PIN 12Current transformer ratio 1500:1 1500:1Max. rated voltage [V] 500 500 500 600Rated current [A] 25 50 75 50W10 2Q= ; 4Q= ←←←←W15 zero current detectionW17 rated current scalingW18 rated current scalingW80HW type codingW81 HW type coding power interface board is used for DCS 500converter modules models C1 and C2. There aredifferent versions in use. The used types are:- SDCS-PIN-21 for 100 A...350 A Converters at 500 V- SDCS-PIN-22 for 450 A...520 A Converters at 500 V ➀- SDCS-PIN-23 for 110 A...270 A Converters at 600 V- SDCS-PIN-24 for 450 A Converters at 600 V ➀- SDCS-PIN-25 for 700 A Converters at 500 V➀ at these boards the SDCS-PIR-21 is used
Resistors R112, R114 and R116 are fitted with MOVelements on the SDCS-PIN-23/24, and on all otherPIN-boards with 0- resistors.The SDCS-PIN-2x board consists of:- firing pulse circuits with pulse transformers- measurement of the armature current- snubber circuit for thyristors protectionconsists of RC circuits and MOV elements) AC and DC high ohmic voltage measurement- scaling for rated current, zero current detection
and HW voltage type coding
- interface for heat sink temperature measurement
Fig. 5.2/1 Layout of the SDCS-PIN-2x board.
with a PTC sensor
- fuses for overvoltage protection and voltage
measuring
- If the SDCS-PIN-21/22 connection board is installed in a DCF50x-0100...0520 / DCF60x0100...0520, then the components R112, R114
and R11
主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。
主营产品各种模块/卡件,控制器,触摸屏,伺服驱动器。
优势:供应进口原装正品,专业停产配件,
发货快,货期精准,
主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌
Copyright ©2019-2022 瑞昌明盛自动化设备有限公司 版权所有 赣ICP备2021006016号