AN700/4 A909001.02,018746.05 A900351.06控制器 SCHENCK

产品标题：AN700/4 A909001.02,018746.05 A900351.06控制器 SCHENCK

型号：AN700/4 A909001.02,018746.05 A900351.06控制器  

品牌：  SCHENCK

质保：七天验收期，质保期一年
发货期：1-3个工作日

产品图片展示

产品详情资料

电源接口板用于C1和C2型DCS转换器模块结构
正在使用不同的版本。使用的类型有：
-500 V时100 A…700 A转换的SDCS-PIN-205
-600 V时110 A…450 A转换的SDCS-PIN-206
-500 V时100 A…1000 A转换的SDCS-PIN-205B
-SDCS-PIN-206B，适用于600 V时110 A…450 A转换
电路板从SDCS-PIN-20x循环更新
➯ 引脚20xA➯ PIN-20xB根据技术
要求和新的C2转换器类型。这个
SDCS-PIN20xB可替代SDCS-PIN-20x
以及引脚20xA。
SDCS-PIN-20x板包括：
-带脉冲变压器的点火脉冲电路
-电枢电流的测量
-晶闸管保护用缓冲电路
（由晶闸管并联的RC电路组成
和刚果民盟网络）
-交流和直流高欧姆电压测量
-负载电阻的额定电流标度，零
电流检测和HW电压类型编码
-散热器温度测量接口
带PTC传感器
-过电压保护和电压保险丝
测量
图5.2/4 SDCS-PIN-20x、20xA、20xB板的布局。
-相同的电路板将用于三相磁场转换器，无需任何修改
供给
备件
电源部分的保护通过以下方式完成：
RC电路。缓冲电路与每个晶闸管并联连接，其间带有保险丝。RCD元件由保险丝F 101至F 103保护。
交流电压测量从后面进行
保险丝。
保险丝数据：巴斯曼KTK-R-6A（600V）
电源接口板SDCS-PIN205可以：
用作SDCS-PIN-21、22和
25.板SDCS-PIN-206可用作SDCS-PIN-23和24的替代品，但不能用作替代品！如果转换器为450 a/520 a/
500 V时为700 A或600 V时为450 A的转换器，必须考虑额外的动作（
SDCS-PIN-2x和
引脚20x由图5.2/3中编号为1、2和3的灰色阴影区域标记）。 The power interface board is used for DCS converter modules construction type C1 and C2. There
are different versions in use. The used types are:
- SDCS-PIN-205 for 100 A...700 A Conv. at 500 V
- SDCS-PIN-206 for 110 A...450 A Conv. at 600 V
- SDCS-PIN-205B for 100 A...1000 A Conv. at 500 V
- SDCS-PIN-206B for 110 A...450 A Conv. at 600 V
The boards are cyclic updated from SDCS-PIN-20x
➯ PIN-20xA ➯ PIN-20xB according to the technical
requirements and the new C2 converter types. The
SDCS-PIN20xB can replace the SDCS-PIN-20x
and PIN-20xA.
The SDCS-PIN-20x board consists of:
- firing pulse circuits with pulse transformers
- measurement of the armature current
- snubber circuit for thyristor protection
(consists of RC circuits in parallel of the thyristors
and RCD network)
- AC and DC high ohmic voltage measurement
- rated current scaling with burden resistors, zero
current detection and HW voltage type coding
- interface for heat sink temperature measurement
with a PTC sensor
- fuses for overvoltage protection and voltage
measuring
Fig. 5.2/4 Layout of the SDCS-PIN-20x, 20xA, 20xB board.
- the same board will be used without any modification at a converter used for three-phase field
supply
Spare part
The protection of the power part is done by using
RC circuits. Snubber circuits are wired up in parallel to each thyristor with fuses in between. RCD elements are protected by the fuses F 101 to F 103.
The AC voltage measurement is taken from behind
the fuse.
 Fuse data: Bussmann KTK-R-6A (600V)
The power interface board SDCS-PIN205 can be
used as a replacement of SDCS-PIN-21, 22 and
25. The board SDCS-PIN-206 can be used as a replacement of SDCS-PIN-23 and 24, but not viceversa! In case of a converter with 450 A / 520 A /
700 A at 500 V or a converter of 450 A at 600 V additional actions have to be taken into account (the
basic difference between the SDCS-PIN-2x and
PIN-20x is marked by the grey-shaded areas numbered 1,2 and 3 in fig. 5.2/3).

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌