ABB 用于CPU模块 Freelance 2000 P 37211-4-0338701 DCP 10

产品标题：ABB 用于CPU模块 Freelance 2000 P 37211-4-0338701 DCP 10

型号： 用于CPU模块 Freelance 2000 P 37211-4-0338701 DCP 10

品牌：ABB  

质保：七天验收期，质保期一年
发货期：1-3个工作日

产品图片展示

产品详情资料

电源接口板PG 63x0用于：
DCP50x型转换器单元。有两种不同
正在使用的版本。使用的类型有：
-400/500 V时90 A…150 A转换器的第6320页
-400/500 V时250 A…540 A转换器的第6330页
PG 63x0板包括：
-点火脉冲电路和脉冲变压器
-通过电流测量电枢电流
变压器
-晶闸管保护用缓冲电路
（由RC电路和MOV元件组成）
-交流和直流高欧姆电压测量
-通过PTC测量散热器温度
传感器
-额定电流、零电流检测的定标
以及HW类型编码
-过电压保护和电压保险丝
测量
图5.5/1接口板PG 63x0的布局。
备件
电源部分的保护通过以下方式完成：
RC电路和MOV元件。缓冲电路
直接与每个晶闸管并联
其间没有保险丝。除此之外，MOV
元件在相位和之间连接
由保险丝F271至F273保护。交流电压测量从保险丝后面进行。
熔丝数据：
巴斯曼KTK-R-6A（600V）
表5.5/1 2-Q转换器PG 63x0板的设置（如果为DCP）
变频器由ABB配备。
2-Q转换器
表5.5/2 4-Q转换器PG 63x0板的设置
DCP变流器由ABB配备。
4-Q转换器
PG板作为备件：
-标准：所有插槽均未占用！
-确保正确的转换器类型相关设置
电路板类型第6320页第6330页
电流互感器比率1500:1 1000:1 500:1
额定电压[V]400/500 400/500
额定电流[A]80 140 235 320 500
基本负担[W]150 100 100 100 100
零电流检测R15[Ω] 470 220 100 68 27
额定电流定标R17[Ω] 39.2 47.5 10 10 4.7
额定电流定标R18[Ω] - 47.5 22.1 10 4.7
额定电流定标R19[Ω] - 100 560 - 4.7
单位编码R13[Ω] 1500
单元编码R14[Ω] 1500
额定电流[P517][A]80 140 235 320 500
额定电压[P518][V]500
大散热器温度[P519][°C]88 67 73 74 75
转换器类型[P520]4
象限数[P521]11111
电路板类型第6320页第6330页
电流互感器比率1500:1 1000:1 500:1
额定电压[V]400/500 400/500
额定电流[A]90 150 250 350 540
基本负担[Ω] 150 100 100 100 100
零电流检测R15[Ω] 470 220 100 68 22
额定电流定标R17[Ω] 33.2 33.2 10 10 3.3
额定电流定标R18[Ω] - 39.2 33.2 10 3.3
额定电流定标R19[Ω] - 1000 39.2 47.5 12
单位编码R13[Ω] 1500
单元编码R14[Ω] 1500
额定电流[P517][A]90 150 250 350 540
额定电压[P518][V]500
大散热器温度[P519][°C]92 69 76 79 78
转换器类型[P520]4
象限数[P521]44444
5.6电源接口电阻板PU 6001
注意：整个电路板上的线路电位
图5.6/1 PU 6001板布局图
该板仅包含电阻器和电容器
增加缓冲电路的功率，即：
由金属支架连接。
PU 6001板与电源接口板PG 6330一起用于540 A的DCP装置。
5.7电源接口板PG 73x2
电源接口板PG 73x2用于：
DCP50x型转换器单元。有两种不同
正在使用的版本。使用的类型有：
-PG 7302适用于400/500 V的875 A…1650 A 4-Q转换器
-第7352页，适用于400/500 V的875 A…1650 A 2-Q转换器
图5.7/1接口板PG 73x2的布局。
PG 73x2板包括：
-点火脉冲电路和脉冲变压器
-电枢电流的测量
-交流和直流高欧姆电压测量
-额定电流、零电流检测的定标
以及HW类型编码
-散热器温度测量接口
（风扇电流监测）The power interface board PG 63x0 is used for
converter units type DCP50x. There are 2 different
versions in use. The used types are:
- PG 6320 for 90 A...150 A converters at 400/500 V
- PG 6330 for 250 A...540 A converters at 400/500 V
The PG 63x0 boards consists of:
- firing pulse circuits and pulse transformers
- measurement of the armature current via current
transformers
- snubber circuit for thyristors protection
(consists of RC circuits and MOV elements)
- AC and DC high ohmic voltage measurement
- heat sink temperature measurement via PTC
sensor
- scaling for rated current, zero current detection
and HW type coding
- fuses for overvoltage protection and voltage
measuring
Fig. 5.5/1 Layout of the interface board PG 63x0.
Spare part
The protection of the power part is done by using
RC circuits and MOV elements. Snubber circuits
are wired up in parallel to each thyristor directly
without fuses in between. In addition to that MOV
elements are wired up in between the phases and
protected by the fuses F271 to F 273. The AC voltage measurement is taken from behind the fuse.
Fuse data:
Bussmann KTK-R-6A (600V)
Table 5.5/1 Settings of the PG 63x0 board for 2-Q converters, if a DCP
converter is equipped with it by ABB.
2-Q Converters
Table 5.5/2 Settings of the PG 63x0 board for 4-Q converters, if a
DCP converter is equipped with it by ABB.
4-Q Converters
PG board as a spare part:
- Standard: all slots unoccupied!
- ensure the correct converter type related settings
Board type PG 6320 PG 6330
Current transformer ratio 1500:1 1000:1 500:1
Rated voltage [V] 400/500 400/500 400/500 400/500 400/500
Rated current [A] 80 140 235 320 500
Basic burden [W] 150 100 100 100 100
Zero current detection R15 [Ω] 470 220 100 68 27
Rated current scaling R17 [Ω] 39.2 47.5 10 10 4.7
Rated current scaling R18 [Ω] - 47.5 22.1 10 4.7
Rated current scaling R19 [Ω] - 100 560 - 4.7
Unit coding R13 [Ω] 1500
Unit coding R14 [Ω] 1500
Rated current [P517] [A] 80 140 235 320 500
Rated voltage [P518] [V] 500
Max. heatsink temp. [P519] [°C] 88 67 73 74 75
Converter type [P520] 4
Number of quadrants [P521] 11111
Board type PG 6320 PG 6330
Current transformer ratio 1500:1 1000:1 500:1
Rated voltage [V] 400/500 400/500 400/500 400/500 400/500
Rated current [A] 90 150 250 350 540
Basic burden [Ω] 150 100 100 100 100
Zero current detection R15 [Ω] 470 220 100 68 22
Rated current scaling R17 [Ω] 33.2 33.2 10 10 3.3
Rated current scaling R18 [Ω] - 39.2 33.2 10 3.3
Rated current scaling R19 [Ω] - 1000 39.2 47.5 12
Unit coding R13 [Ω] 1500
Unit coding R14 [Ω] 1500
Rated current [P517] [A] 90 150 250 350 540
Rated voltage [P518] [V] 500
Max. heatsink temp. [P519] [°C] 92 69 76 79 78
Converter type [P520] 4
Number of quadrants [P521] 44444
5.6 Power interface resistor board PU 6001
Attention: Line potential on the complete board
Fig. 5.6/1 Layout of the PU 6001 board
This board contains only resistors and capacitors to
increase the power of the snubber circuit and it is
connected by metal standoffs.
The PU 6001 board is used with the power interface board PG 6330 for DCP units at 540 A.
5.7 Power interface board PG 73x2
The power interface board PG 73x2 is used for
converter units type DCP50x. There are 2 different
versions in use. The used types are:
- PG 7302 for 875 A...1650 A 4-Q-converters at 400/500 V
- PG 7352 for 875 A...1650 A 2-Q-converters at 400/500 V
Fig. 5.7/1 Layout of the interface board PG 73x2.
The PG 73x2 boards consists of:
- firing pulse circuits and pulse transformers
- measurement of the armature current
- AC and DC high ohmic voltage measurement
- scaling for rated current, zero current detection
and HW type coding
- interface to heat sink temperature measurement
(fan current monitoring)  

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌