DO814 3BUR001455R1 S800输入/输出数字输出模块 ABB

产品标题：DO814 3BUR001455R1 S800输入/输出数字输出模块 ABB

型号： DO814 3BUR001455R1 S800输入/输出数字输出模块 ABB

品牌：ABB  

质保：七天验收期，质保期一年
发货期：1-3个工作日

产品图片展示

产品详情资料

备件
电源部分的保护通过以下方式完成：
RC和缓冲电路。缓冲器电路由保险丝F71、F72和F73保护。交流电压
从保险丝后面进行测量。
保险丝数据：Ferraz 25 A/660 V；
6621型CP URD 22.58 Q/25
表5.7/1 2-Q转换器PG 7352板的设置（若为DCP）
变频器由ABB配备。
2-Q转换器
表5.7/2 4-Q转换器PG 7302板的设置
DCP变流器由ABB配备。
4-Q转换器
PG板作为备件：
-标准：所有插槽均未占用！
-确保正确的转换器类型相关设置
板类型PG 7352
电流互感器比1200:1 1500:1
额定电压[V]400/500 400/500
额定电流[A]950 1180 1750
基本负担[W]5 5 5
零电流检测R15[Ω] 22 22 22
额定电流定标R17[Ω] 3.3 3.3 3.3
额定电流定标R18[Ω] 47.5 10 3.3
额定电流定标R19[Ω] 三十三点二一零二二
单位编码R13[Ω] 1500
单元编码R14[Ω] 1500
额定电流[A][P517][A]950 1180 1750
额定电压[V][P518][V]500
大散热器温度[P519][°C]100 100 100
转换器类型[P520]4
象限数[P521]1 1 1 1
板类型PG 7302
电流互感器比1200:1 1500:1
额定电压[V]400/500 400/500
额定电流[A]875 1100 1650
基本负担[Ω] 555
零电流检测R15[Ω] 22 22 22
额定电流定标R17[Ω] 4.7 3.3 3.3
额定电流定标R18[Ω] 22.1 10 4.7
额定电流定标R19[Ω] 二十二点一一八一二
单位编码R13[Ω] 1500
单元编码R14[Ω] 1500
额定电流[P517][A]875 1100 1650
额定电压[P518][V]500
大散热器温度[P519][°C]100 100 100
转换器类型[P520]4
象限数[P521]4 4 4 4




5.8电源接口板PG 7303
电源接口板PG 7303用于：
具有索引D的DCP50x型转换器装置。有
只有一个版本在使用中。
用于875 A…1650 A的第7303页
400/500 V时的2-Q和4-Q转换器
必须注意以下各项的可交换性：
董事会。DCP转换器配备有：
不同的董事会。索引为A、B和
C在类型代码中，使用电源接口
电路板第7302页（4-Q）或第7352页（2-Q）和风扇
监控板PW 1001（板PG 7302可以
用作PG 7352的备件，但不
反之亦然！）。索引为D的类型使用幂
图5.8/1接口板PG 7303的布局。
接口板PG 7303（2-Q和4-Q）和风扇
监控板PW 1002.控制板
SDCS-CON-2必须配备软件21.232（或更高版本）或S15.208/15.610（或
更高）。
PG 7303板包括：
-点火脉冲电路和脉冲变压器
-电枢电流的测量
-交流和直流高欧姆电压测量
-额定电流、零电流检测的定标
以及HW类型编码
-接口至散热器温度   Spare part
The protection of the power part is done by using
RC and snubber circuits. The snubber circuit is protected by fuses F71, F72 and F73. The AC voltage
measurement is taken from behind the fuse.
Fuse data: Ferraz 25 A/660 V;
Type 6,621 CP URD 22.58 Q/25
 Table 5.7/1 Settings of the PG 7352 board for 2-Q converters, if a DCP
converter is equipped with it by ABB.
2-Q Converters
Table 5.7/2 Settings of the PG 7302 board for 4-Q converters, if a
DCP converter is equipped with it by ABB.
4-Q Converters
PG board as a spare part:
- Standard: all slots unoccupied!
- ensure the correct converter type related settings
Board type PG 7352
Current transformer ratio 1200:1 1500:1
Rated voltage [V] 400/500 400/500 400/500
Rated current [A] 950 1180 1750
Basic burden [W] 5 5 5
Zero current detection R15 [Ω] 22 22 22
Rated current scaling R17 [Ω] 3.3 3.3 3.3
Rated current scaling R18 [Ω] 47.5 10 3.3
Rated current scaling R19 [Ω] 33.2 10 22
Unit coding R13 [Ω] 1500
Unit coding R14 [Ω] 1500
Rated current [A] [P517] [A] 950 1180 1750
Rated voltage [V] [P518] [V] 500
Max. heatsink temp. [P519] [°C] 100 100 100
Converter type [P520] 4
Number of quadrants [P521] 1 1 1
Board type PG 7302
Current transformer ratio 1200:1 1500:1
Rated voltage [V] 400/500 400/500 400/500
Rated current [A] 875 1100 1650
Basic burden [Ω] 555
Zero current detection R15 [Ω] 22 22 22
Rated current scaling R17 [Ω] 4.7 3.3 3.3
Rated current scaling R18 [Ω] 22.1 10 4.7
Rated current scaling R19 [Ω] 22.1 18 12
Unit coding R13 [Ω] 1500
Unit coding R14 [Ω] 1500
Rated current [P517] [A] 875 1100 1650
Rated voltage [P518] [V] 500
Max. heatsink temp. [P519] [°C] 100 100 100
Converter type [P520] 4
Number of quadrants [P521] 4 4 4




5.8 Power interface board PG 7303
The power interface board PG 7303 is used for
converter units type DCP50x with index D. There is
only one version in use.
PG 7303 for 875 A...1650 A for
2-Q and 4-Q-converters at 400/500 V
Attention has to be paid to the exchangeability of
the boards. The DCP converters are equipped with
different boards. The types with the index A, B and
C within the type code use the power interface
board PG 7302 (4-Q) or PG 7352 (2-Q) and the fan
monitoring board PW 1001 (the board PG 7302 can
be used as a spare part for the PG 7352, but not
vice-versa!). The types with index D use the power
Fig. 5.8/1 Layout of the interface board PG 7303.
interface board PG 7303 (2-Q and 4-Q) and the fan
monitoring board PW 1002. The control board
SDCS-CON-2 has to be equipped either with software 21.232 (or higher) or with S15.208/15.610 (or
higher).
The PG 7303 boards consists of:
- firing pulse circuits and pulse transformers
- measurement of the armature current
- AC and DC high ohmic voltage measurement
- scaling for rated current, zero current detection
and HW type coding
- interface to heat sink temp

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌