欢迎访问瑞昌明盛自动化设备有限公司官网!
关于我们 | 联系我们

+86 15270269218

您的位置:首页>>产品中心 >> foxboro

CAB 800/4 K006660.04 MCP800/4 输入控制器 用于扩展 SCHENCK

型号: MCP-800  分类: foxboro
  • MCP-800
  • MCP-800
  • MCP-800
  • MCP-800
  • MCP-800


产品标题:CAB 800/4 K006660.04 MCP800/4 输入控制器 用于扩展 SCHENCK

型号:CAB 800/4 K006660.04 MCP800/4 输入控制器 用于扩展  

品牌:  SCHENCK

质保:七天验收期,质保期一年
发货期:1-3个工作日

 

 

产品图片展示

CAB 800/4 K006660.04 MCP800/4 输入控制器 用于扩展 SCHENCK  

 

产品详情资料

t董事会由以下人员组成:
7个隔离数字输入
2个模拟输入
1个用于PTC或PT 100电源的电流源
元素
该板通过一个10针平面进行电气连接
连接转换器模块电子设备的电缆。将连接至SDCS-CON-x板
从SDCS-IOE-1上的端子行X17到X17
必须安装在转换器模块外部。
由于EMC原因,电缆长度为2米。
机械结构
电路板安装在塑料外壳上,塑料外壳
它有脚元件(菲尼克斯接触系列UMK)。
支脚元件允许卡扣式装配到
标准DIN EN导轨(EN 50022、50035)。
尺寸包括塑料外壳。
图6.4/2 SDCS-IOE-1板的布局和跳线设置图。6.4/1 SDCS-IOE-1板和SDCS-CON-x板的连接
激活500Ω 输入终端之间
模拟输入的功能性温度传感器供应默认值DIN导轨的塑料外壳安装
图。6.4/3 SDCS-IOE-1板输入值信号定义的端子连接通过0…8 V软件^=“0”状态16…31 V ^=“1”状态标记两个电位隔离组。组和控制板之间的大工作电压为50 V滤波器时间常数
输入为2.2 mReso-输入/输出缩放功率,按模式[位]的公共标记值,硬件范围11+符号-10…0…+10 V,软件±40 V➀ ➁ ➂
11+符号-10…0…+10 V软件±40 V➀ ➁ ➂ ➃1.5毫安电流。PTC5 mA电流的来源。PT100的来源
包括控制板在内的精度为0.7%➀ 总平滑时间2 ms➁ -通过设置S1/S2,20…0…+20 mA➂ 4…20毫安➁ + 软件功能➃ -通过设置S3(CMR±10 V),1…0…-1 V;通过设置S32+S2(CMR±10 V),2…0…-2 mA
SDCS-CON-x软件
7个通信板
7.1通信板SDCS-COM-1
图7.1/2 SDCS-COM-1板的布局和跳线设置图。7.1/1 SDCS-COM-x与合作伙伴之间的连接
该板用于与所有DCS通信
500个转换器模块独立于其软件版本。它由3个不同的通信信道组成。所有RxD信道(接收器)均具有:
蓝色,所有TxD(发射机)信道均为灰色
颜色如果需要进行任何连接,请始终:
连接相同颜色的插头和插座
另外信道1是1.5 Mbits/s的HDLC信道
用于结合操作程序与PC通信。如果软件
由S21.xxx编码的版本正在使用,其他通道不能一起使用。X1D8 D11X1.1+24 VSDCS-COM-1用于Ch3供应的rnal电源:内部电源默认值导电支架RXD
TXDSDS-COM-xThe board consists of:
7 isolated digital inputs
2 analogue inputs
1 current source for the supply of PTC or PT 100
elements
The board is connected electrically via a 10 pin flat
cable to the converter module electronics. The connection will be done to the SDCS-CON-x board
from terminal row X17 to X17 on SDCS-IOE-1. It
has to be mounted outside of the converter module.
The cable length is 2 m because of EMC reasons.
Mechanical Construction
The board is mounted on a plastic housing which
has foot elements (Phoenix Contact series UMK).
The foot elements permit snap-in assembly to a
standard DIN EN rail (EN 50022, 50035).
The dimensions are including the plastic housing.
Fig. 6.4/2 Layout and jumper settings of the SDCS-IOE-1 boardFig. 6.4/1 Connection of the SDCS-IOE-1 board andthe SDCS-CON-x board. parking
activation of500 Ω betweeninput terminal
Functionallity of analogue inputs Temperature sensor supplydefault valuePlastic housingMounting for DIN-rail
Fig. 6.4/3 Terminal connection of the SDCS-IOE-1 boardInput value Signal definition Remarksby0...8 V Software ^= "0" status16...31 V ^= "1" statusTwo potential isolatedgroups. Max. operatingvoltage between thegroups and the controlboard is 50 VFilter time constant for all
inputs is 2.2 msReso- Input/output Scaling Power Common Remarksution values by mode[bit] Hardware range11 + sign -10...0...+10 V Software ±40 V ➀ ➁ ➂
11 + sign -10...0...+10 V Software ±40 V ➀ ➁ ➂ ➃1.5 mA Curr. source for PTC5 mA Curr. source for PT100
absolute accuracy including the controlboard is 0.7%➀ totalsmoothing time 2 ms➁ -20...0...+20 mA by setting S1/S2➂ 4...20 mA by ➁ + Software function➃ -1...0...-1 V by setting S3 (CMR ±10 V)-2...0...-2 mA by setting S3 + S2(CMR ±10 V)
  SDCS-CON-x Software
7 Communication boards
7.1 Communication board SDCS-COM-1
Fig. 7.1/2 Layout and jumper settings of the SDCS-COM-1 boardFig. 7.1/1 Connection between SDCS-COM-x and a partner
This board is used for communications to all DCS
500 converter modules independent from their software version. It consists of 3 different communication channels. All RxD channels (receiver) have
blue color, all TxD (transmitter) channels have grey
color. If any connections should be made always
connect the same color (plug and socket) with each
other.Channel 1 is a HDLC channel of 1.5 Mbits/s and is
used for the communication with a PC in conjunction with a operation program. If the software
version coded by S21.xxx is in use, the other channels cannot be used together.X1D8 D11X1.1 +24 VSDCS-COM-1 rnal supplySetting for supply of Ch3:Internal supplydefault valueconductive supportRxD
TxDSDCS-COM-x

 

主营产品简介
专注于DCSPLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件,控制器,触摸屏,伺服驱动器。

优势:供应进口原装正品,专业停产配件,

发货快,货期精准,

主营品牌包括 ABB贝利、GE/FUANCFOXBORO、英维思TRICONEX 、本特利BENTLYA-B罗克韦尔、艾默生EMERSON OVATIONMOTOROLAXYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTHKUKANIDEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOGPROSOFT等品牌

 

 



更多
查看更多 >>

推荐产品