欢迎访问瑞昌明盛自动化设备有限公司官网!
关于我们 | 联系我们

+86 15270269218

您的位置:首页>>产品中心 >> foxboro

51401583-100 EPNI 用于模拟量输出接口模块 Honeywell

型号: Honeywell 51401583-100  分类: foxboro
  • Honeywell 51401583-100
  • Honeywell 51401583-100
  • Honeywell 51401583-100
  • Honeywell 51401583-100
  • Honeywell 51401583-100


产品标题:51401583-100 EPNI 用于模拟量输出接口模块 Honeywell

型号:51401583-100 EPNI 用于模拟量输出接口模块 

品牌:  Honeywell

质保:七天验收期,质保期一年
发货期:1-3个工作日

 

 

产品图片展示

51401583-100 EPNI 用于模拟量输出接口模块 Honeywell  

 

产品详情资料

存储器电路和备份
包括系统和参数值的程序存储在闪存PROM D33中。不同的程序可以直接下载到
舞会。应用程序功能和参数
值保存在闪存PROM D35中。
故障和报警消息-它们出现的时间和一些其他值,如操作时间
小时等存储在静态RAM电路中。
他们有一个1 F的备用电容器,可以持续
至少8小时,通常为几天。需要
为备用电容器充电约30分钟。
ASIC功能
ASIC=专用集成电路
大多数测量和控制功能用于:
DCS500在ASIC中完成:
-与控制面板通信(RS 485)
-与励磁机通信(RS 485)
-测量
-看门狗功能
-A/D和D/A转换控制
-晶闸管触发脉冲产生
看门狗功能
控制板有一个内部监视器。这个
看门狗控制控制板的运行
程序如果看门狗跳闸,它具有以下功能
影响:
-禁止写入FPROM。数字输出被强制为低。
-可编程模拟输出重置为
零,0V。
七段显示器
七段显示器位于控制装置上
显示驱动器的状态。
-晶闸管点火控制复位并禁用Memory circuits and the back-up
The program including system and parameter values is stored at Flash PROM D33. Different programs can be downloaded directly to these
PROMs. Application functionality and parameter
values are saved in the Flash PROM D35.
Fault and Alarm messages -the time of their appearance and some other values like the operating
hours and so on- are stored in static RAM circuits.
They have a back up capacitor of 1 F, which lasts
minimum 8 hours, typically several days. It takes
about 30 minutes to charge the backup capacitor.
ASIC function
ASIC = Application Specific Integrated Circuit
Most of the measurements and control functions for
the DCS500 are done in the ASIC:
- communication with control panel (RS 485)
- communication with field exciters (RS 485)
- measurement
- watchdog function
- A/D and D/A-conversion control
- thyristor firing pulse generation
Watchdog function
The control board has an internal watchdog. The
watchdog controls the running of the control board
program. If the watchdog trips, it has the following
effects:
- Writing to FPROM is disabled. Digital outputs are forced low.
- Programmable analogue outputs are reset to
zero, 0V.
Seven segment display
A seven segment display is located on the control
board and it shows the state of drive.
- Thyristor firing control is reset and disabled

主营产品简介
专注于DCSPLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件,控制器,触摸屏,伺服驱动器。

优势:供应进口原装正品,专业停产配件,

发货快,货期精准,

主营品牌包括 ABB贝利、GE/FUANCFOXBORO、英维思TRICONEX 、本特利BENTLYA-B罗克韦尔、艾默生EMERSON OVATIONMOTOROLAXYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTHKUKANIDEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOGPROSOFT等品牌

 

 



更多
查看更多 >>

推荐产品