80190-560-02-R 80190-560-02处理器模块控制数据输入输出 A-B

产品标题：80190-560-02-R 80190-560-02处理器模块控制数据输入输出 A-B

型号：80190-560-02-R 80190-560-02处理器模块控制数据输入输出 

品牌：  A-B

质保：七天验收期，质保期一年
发货期：1-3个工作日

产品图片展示

产品详情资料

辅助配电
电子电源板SDCS-POW-1
（参见单独章节）生成不同级别的
电压。其中一些是通过
CON-2电路板直接连接到电路板
其他人被操纵，然后被转移。
电子电源系统与
以两种方式监控电压水平。有一个
信号powerfail primary，用于监控输入
POW-1板和a的电源电压
信号powerfail辅助，用于监控低
电压电平。如果一个电压电平低于RS485串行通信信道
控制板有两个RS485通道。一
通道用于DCF 501B的励磁机控制/
502B、DCF 503A/504A或DCF 601/602（端子
X16:1…3）和二个用于控制面板（CDP）
端子X33或X34。端子X33和X34
内部并联连接。
DDCS信道集成
控制板SDCS-CON-2具有集成的
DDCS（数字驱动控制系统）通道
传输速率敢达4 Mbit/s。该信道（V260）可以：
用于带DCS 500B的现场总线模块
转换器或与DCS 600的12_PULE链路
转换器。提供了端子X16:4和5
模块电源（+24 V/≤150 mAthreshold产生跳闸信号。
除此之外，还有一个用于
5V电平。如果+5 V下降到跳闸电平以下，则
通过硬件导致主重置。所有I/O寄存器Auxiliary power distribution
The electronic power supply board SDCS-POW-1
(see separate chapter) generates different levels of
voltages. Some of them are transferred via the
CON-2 board directly to the boards, where they are
used, others are manipulated and then transferred.
The electronic power supply system with the different
voltage levels is monitored in two ways. There is a
signal powerfail primary, which monitors the input
power supply voltage of the POW-1 board and a
signal powerfail secondary, which monitors the low
voltage levels. If one voltage level drops below theRS485 serial communication channels
The control board has two RS485 channels. The first
channel is used for field exciter control of DCF 501B/
502B, DCF 503A/504A or DCF 601/602 (terminals
X16:1...3) and the second for the control panel (CDP)
at terminals X33 or X34. The terminals X33 and X34
are wired up in parallel internally.
DDCS Channel integrated
The control board SDCS-CON-2 has an integrated
DDCS (Digital Drive Control System) channel with a
transfer rate up to 4 Mbits/s. This channel (V260) can
be used for fieldbus modules with the DCS 500B
converters or for the 12_PULE LINK with DCS 600
converters. The terminals X16:4 and 5 are provided
for power supply of the modules (+24 V / ≤150 mAthreshold a trip signal is generated.
In addition to that there is a monitoring function for the
5 V level. If +5 V drops under the tripping level, it
causes a master reset by hardware. All I/O registers
are forced to 0 and the firing pulses are suppressed.
被强制为0，并且触发脉冲被抑制。

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌