51304511-200 NIM 用于输入调制解调器模块 Honeywell

产品标题：51304511-200 NIM 用于输入调制解调器模块 Honeywell

型号：51304511-200 NIM 用于输入调制解调器模块 

品牌：  Honeywell

质保：七天验收期，质保期一年
发货期：1-3个工作日

产品图片展示

产品详情资料

备件
电源部分的保护通过以下方式完成：
RC电路。缓冲器电路与并联连接
每个晶闸管之间带有保险丝。RCD元件由保险丝F 101至F 103保护。
交流电压测量从后面进行
3ADW000165R0201_Technical_Data_e_b
表5.2/1 2-Q转换器的SDCS-PIN-20xB板设置（如果ABB配备DCS转换器）
2-Q转换器
表5.2/2 4-Q变流器的SDCS-PIN-20xB板的设置（如果ABB配备DCS变流器）
4-Q转换器
用作备件的板：
-默认值：代表跳线Wxx/Rxx的所有电阻器均处于良好状态
-确保正确的转换器类型相关设置
板型引脚205B引脚206B
电流互感器比1000:1600:1 3000:1 1000:1 600:1
额定电压[V]500 600
额定电流[A]100 125 180 225 315 405 470 610 740 900 100 245 405
W10 2-Q/4-Q选择
W80 HW类型编码
W81 HW类型编码
W82 HW类型编码
R248 HW类型编码
R249 HW类型编码
R250 HW类型编码
R251硬件类型编码
R252硬件类型编码
R149 33Ω 零电流检测
R150 47.5Ω 零电流检测
R151100Ω 零电流检测
R160 1kΩ 额定电流定标
R161 1kΩ 额定电流定标
R162332Ω 额定电流定标
R163332Ω 额定电流定标
R164332Ω 额定电流定标
R165332Ω 额定电流定标
R166332Ω 额定电流定标
R167 47.5Ω 额定电流定标
R168 33.2Ω 额定电流定标
R169 33.2Ω 额定电流定标
R170 33.2Ω 额定电流定标
R171 33.2Ω 额定电流定标
R172 33.2Ω 额定电流定标
R173 33.2Ω 额定电流定标
R174 33.2Ω 额定电流定标
R175 33.2Ω 额定电流定标
R176 33.2Ω 额定电流定标
R177 10Ω 额定电流定标
R178 10Ω 额定电流定标
R17910Ω 额定电流定标
板型引脚205B引脚206B
1000:1 600:1 3000:1 1000:1 600:1
500 600
100 140 200 250 350 450 520 680 820 1000 110 270 450
W10 2-Q/4-Q选择
W80 HW类型编码
W81 HW类型编码
W82 HW类型编码
R248 HW类型编码
R249 HW类型编码
R250 HW类型编码
R251硬件类型编码
R252硬件类型编码
R149 33Ω 零电流检测
R150 47.5Ω 零电流检测
R151100Ω 零电流检测
R160 1kΩ 额定电流定标
R161 1kΩ 额定电流定标
R162332Ω 额定电流定标
R163332Ω 额定电流定标
R164332Ω 额定电流定标
R165332Ω 额定电流定标
R166332Ω 额定电流定标
R167 47.5Ω 额定电流定标
R168 33.2Ω 额定电流定标
R169 33.2Ω 额定电流定标
R170 33.2Ω 额定电流定标
R171 33.2Ω 额定电流定标
R172 33.2Ω 额定电流定标
R173 33.2Ω 额定电流定标
R174 33.2Ω 额定电流定标
R175 33.2Ω 额定电流定标
R176 33.2Ω 额定电流定标
R177 10Ω 额定电流定标
R178 10Ω 额定电流定标
R17910Ω 额定电流定标
额定电流[A]
额定电压[V]
电流互感器比
表示已拆下跳线
三、5-4
3ADW000165R0201_Technical_Data_e_b
图5.2/2带有SDCS-PIN-20x（PIN-20xA）和PIN-20xB板的典型电枢电路晶闸管转换器图
电枢电流测量电阻控制板
交流/直流电压测量电路
硬件编码
点火脉冲通道
仅在4-Q转换器的情况下
见表
对于R1xx
电源接口板SDCS-PIN-20x
R2xx见表
三、5-5
3ADW000165R0201_Technical_Data_e_b
5.3电流隔离-T90、A92
电流隔离是变频器的一个选项
电流范围2050…5150 A和额定电压
≤1000 V。对于额定电压为
1190 V和12脉冲串行>2x 500 V电流
隔离是一种标准设备。它用于代替高欧姆电阻电压测量，并具有完全隔离的优点
从电源部分到电子部分。
变压器T90和直流传感器A92
位于转换器模块外部。内部交流和直流电压测量通道
打开并连接至T90和A92
单位。
硬件和软件设置：
测量板上的电压编码
结构类型A5/A6/A7（C4）
变频器名称。电压[V]*Y=4（400V）
Y=5（500V）
Y=6（600V）Y=7（690V）Y=8（790V）Y=9（1000V）Y=1（1190V）
额定电源电压[V AC]220…500 270…600 300…690 350…790 450…1000 530…1190
转换标称值。伏特
设置（TINGS）块*
500 600 690 800 1000 1200
测量板SDCS-引脚51引脚51引脚
电阻器W1…W26
所有电阻均为0Ω
电流隔离
引脚51上的电阻Rx 27.4 kΩ 27.4公里Ω 27.4公里Ω 27.4公里Ω 27.4公里Ω 27.4公里Ω
DC-DC传感器A92 8680A1
开关位置RG*7（675 V）6（810 V）5（945 V）4（1080
五） 2（1350伏）1（1620伏）
*12脉冲、串行和顺序具有不同的选择Spare part
The protection of the power part is done by using
RC circuits. Snubber circuits are wired in parallel to
each thyristor with fuses in between. RCD elements are protected by the fuses F 101 to F 103.
The AC voltage measurement is taken from behind
3ADW000165R0201_Technical_Data_e_b
Table 5.2/1 Settings of the SDCS-PIN-20xB board for 2-Q converters if a DCS converter is equipped with it by ABB
2-Q Converters
Table 5.2/2 Settings of the SDCS-PIN-20xB board for 4-Q converters if a DCS converter is equipped with it by ABB
4-Q Converters
Board used as a spare part:
- default: all resistors, representing a jumper Wxx / Rxx are in condition
- ensure the correct converter type related settings
Board type PIN 205B PIN 206B
Current transformer ratio 1000:1 600:1 3000:1 1000:1 600:1
Rated voltage [V] 500 600
Rated current [A] 100 125 180 225 315 405 470 610 740 900 100 245 405
W10 2-Q/4-Q selection
W80 HW type coding
W81 HW type coding
W82 HW type coding
R248 HW type coding
R249 HW type coding
R250 HW type coding
R251 HW type coding
R252 HW type coding
R149 33 Ω zero current detection
R150 47.5 Ω zero current detection
R151 100 Ω zero current detection
R160 1k Ω rated current scaling
R161 1k Ω rated current scaling
R162 332 Ω rated current scaling
R163 332 Ω rated current scaling
R164 332 Ω rated current scaling
R165 332 Ω rated current scaling
R166 332 Ω rated current scaling
R167 47.5 Ω rated current scaling
R168 33.2 Ω rated current scaling
R169 33.2 Ω rated current scaling
R170 33.2 Ω rated current scaling
R171 33.2 Ω rated current scaling
R172 33.2 Ω rated current scaling
R173 33.2 Ω rated current scaling
R174 33.2 Ω rated current scaling
R175 33.2 Ω rated current scaling
R176 33.2 Ω rated current scaling
R177 10 Ω rated current scaling
R178 10 Ω rated current scaling
R179 10 Ω rated current scaling
Board type PIN 205B PIN 206B
1000:1 600:1 3000:1 1000:1 600:1
500 600
100 140 200 250 350 450 520 680 820 1000 110 270 450
W10 2-Q/4-Q selection
W80 HW type coding
W81 HW type coding
W82 HW type coding
R248 HW type coding
R249 HW type coding
R250 HW type coding
R251 HW type coding
R252 HW type coding
R149 33 Ω zero current detection
R150 47.5 Ω zero current detection
R151 100 Ω zero current detection
R160 1k Ω rated current scaling
R161 1k Ω rated current scaling
R162 332 Ω rated current scaling
R163 332 Ω rated current scaling
R164 332 Ω rated current scaling
R165 332 Ω rated current scaling
R166 332 Ω rated current scaling
R167 47.5 Ω rated current scaling
R168 33.2 Ω rated current scaling
R169 33.2 Ω rated current scaling
R170 33.2 Ω rated current scaling
R171 33.2 Ω rated current scaling
R172 33.2 Ω rated current scaling
R173 33.2 Ω rated current scaling
R174 33.2 Ω rated current scaling
R175 33.2 Ω rated current scaling
R176 33.2 Ω rated current scaling
R177 10 Ω rated current scaling
R178 10 Ω rated current scaling
R179 10 Ω rated current scaling
Rated current [A]
Rated voltage [V]
Current transformer ratio
indicates a removed jumper
III 5-4
3ADW000165R0201_Technical_Data_e_b
Fig. 5.2/2 Typical armature circuit thyristor converter diagram with SDCS-PIN-20x (PIN-20xA), PIN-20xB board

Control board Armature current measuring resistances
AC/DC voltage measuring circuits
HW-coding
Firing pulse channels
only in case of 4-Q converters
see table
for R1xx
POWER INTERFACE BOARD SDCS-PIN-20x
see table for R2xx
III 5-5
3ADW000165R0201_Technical_Data_e_b
5.3 Galvanic isolation - T90, A92
The Galvanic isolation is an option for converters in
the current range 2050...5150 A and rated voltages
≤1000 V. For converters with a rated voltage of
1190 V and 12-pulse serial > 2x 500 V the galvanic
isolation is a standard equipment. It is used to replace the high-ohmic resistance voltage measurement and gives the advantage of a total isolation
from power part to electronic part.
The transformer T90 and the DC transducer A92
are located outside the converter module. The internal AC and DC voltage measurement channels
are opened and connected to the T90 and A92
units.
Hard and software settings:
Voltage coding on measuring board
Construction type A5 / A6 / A7 (C4)
Conv. nom. voltage [V] * Y=4 (400V)
Y=5 (500V)
Y=6 (600V) Y=7 (690V) Y=8 (790V) Y=9 (1000V) Y=1 (1190V)
Rated mains voltage [V AC] 220…500 270…600 300…690 350…790 450…1000 530…1190
Value f. conv. nom. volt at
SET(TINGS) block *
500 600 690 800 1000 1200
Measuring board SDCS- PIN-51 PIN-51 PIN-51 PIN-51 PIN-51 PIN-51
Resistors W1…W26
all resistors are 0 Ω
Galvanic isolation
Resistors Rx on PIN51 27.4 kΩ 27.4 kΩ 27.4 kΩ 27.4 kΩ 27.4 kΩ 27.4 kΩ
DC-DC transducer A92 8680A1
Switch position RG * 7 (675 V) 6 (810 V) 5 (945 V) 4 (1080 
V) 2 (1350 V) 1 (1620 V)
* 12-pulse serial and sequential have a different selection between 

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌