欢迎访问瑞昌明盛自动化设备有限公司官网!
关于我们 | 联系我们

+86 15270269218

您的位置:首页>>产品中心 >> foxboro

SCHENCK 用于控制器中间振动控制 4000输入值模块 VB-430

型号: SCHENCK VB-430  分类: foxboro
  • SCHENCK VB-430
  • SCHENCK VB-430
  • SCHENCK VB-430
  • SCHENCK VB-430
  • SCHENCK VB-430


产品标题:SCHENCK 用于控制器中间振动控制 4000输入值模块 VB-430

型号: 用于控制器中间振动控制 4000输入值模块 VB-430

品牌: SCHENCK  

质保:七天验收期,质保期一年
发货期:1-3个工作日

 

 

产品图片展示
SCHENCK 用于控制器中间振动控制 4000输入值模块 VB-430

产品详情资料  
FBP接口350 V AC 2 sEthernet 350 V AC 3 sARCNET 350 V AC 4电源设备对于模块的供电,符合SELV或PELV规范的电源设备必须
习惯于安全超低压(SELV)和保护超低压(PELV)为了确保AC500/AC500 eCo超低压电路、24 V直流电源、通信接口、I/O电路和所有连接设备的电气安全,必须根据适用标准从符合SELV、PELV、2级、限压或限功率要求的电源供电。
警告!不正确的安装可能会因接触危险电压而导致死亡!
为避免人身伤害,安装过程中必须遵守并实施安全隔离、双重或加强绝缘以及一次和二次电路隔离仅对一次和二次电路安全电流分离的安全超低电压(SELV)使用电源转换器安全隔离意味着主变压器的一次电路必须通过双重或加强绝缘与二次电路隔离。超低电压保护(PELV)可防止触电。电源装置2022/01/31 3ADR010071,7,en_US 54.5电磁兼容性表2:使用范围参数值工业应用是国内应用否表3:静电放电抗扰度(ESD),根据IEC 61000-4-2,B区标准B参数值空气放电时的静电电压8 kV接触放电时的静电压4 kV,封闭式开关柜内6 kV 1
)带通信连接器的ESD为了防止操作故障
建议操作人员在接触通信连接器之前自行放电,或采取其他适当措施减少静电放电的影响。带端子座连接器的ESD操作期间不得触摸端子座和处理器模块或通信模块的连接器。这同样适用于包含所有模块的I/O总线。
1) 通过额外的具体措施(见具体文件),实现了对装运等级的高要求。表4:根据IEC 61000-4-3,B区,标准A参数值,辐射(CW辐射)影响的抗扰度试验场强10 V/m表5:根据IEC 6100-4-4,B区的快速瞬态干扰电压(突发)抗扰度,标准B参数值电源电压单位(DC)2 kV电源电压单位
模拟输入/输出1 kVCS31总线1 kV串行RS-485接口(COM)1 kV串联RS-232接口(COM,不适用于PM55x
和PM56x)1 kVARCNET 1 kVFBP interface 350 V AC 2 sEthernet 350 V AC 2 sARCNET 350 V AC 2 s4.4 Power supply unitsFor the supply of the modules, power supply units according to SELV or PELV specifications must be
used.Safety Extra Low Voltage (SELV) and Protective Extra Low Voltage (PELV)To ensure electrical safety of AC500/AC500-eCo extra low voltage circuits, 24 V DCsupply, communication interfaces, I/O circuits, and all connected devices must bepowered from sources meeting requirements of SELV, PELV, class 2, limited voltageor limited power according to applicable standards.
WARNING!Improper installation can lead to death by touching hazardous voltages!
To avoid personal injury, safe separation, double or reinforced insulation and separation of the primary and secondary circuit must be observed and implementedduringnstallation.– Only use power converters for safety extra-low voltages(SELV) with safe galvanicseparation of the primary and secondary circuit.– Safe separation means that the primary circuit of mainstransformers must beseparated from the secondary circuit by double or reinforced insulation. The protective extra-low voltage (PELV) offers protection against electric shock.Power supply units2022/01/31 3ADR010071, 7, en_US 54.5 Electromagnetic compatibilityTable 2: Range of useParameter ValueIndustrial applications YesDomestic applications NoTable 3: Immunity against electrostatic discharge (ESD),according to IEC 61000-4-2, zone B, criterion BParameter ValueElectrostatic voltage in case of air discharge 8 kVElectrostatic voltage in case of contact discharge 4 kV, in aclosed switchgear cabinet 6 kV 1
)ESD with communication connectors In order to prevent operating malfunctions, it is
recommended, that the operating personnel discharge themselves prior to touching communication connectors or perform other suitable measures to reduce effects ofelectrostatic discharges.ESD with connectors of terminal bases The connectors the Terminal Bases andprocessor modules or Communication Modulesmust not be touched during operation. The sameis valid for the I/O bus with all modules involved.
1) High requirement for shipping classes are achieved with additional specific measures (see specificdocumentation).Table 4: Immunity against the influence of radiated (CW radiated), according to IEC 61000-4-3, zoneB, criterion AParameter ValueTest field strength 10 V/mTable 5: Immunity against fast transient interferencevoltages (burst), according to IEC 61000-4-4,zone B, criterion BParameter ValueSupply voltage units (DC) 2 kVSupply voltage units (AC) 2 kVDigital inputs/outputs (24 V DC) 1 kVDigital inputs/outputs (120 V AC...240 V AC) 2 kV
Analog inputs/outputs 1 kVCS31 bus 1 kVSerial RS-485 interfaces (COM) 1 kVSerial RS-232 interfaces (COM, not for PM55x
and PM56x)1 kVARCNET 1 kV

主营产品简介
专注于DCSPLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件,控制器,触摸屏,伺服驱动器。

优势:供应进口原装正品,专业停产配件,

发货快,货期精准,

主营品牌包括 ABB贝利、GE/FUANCFOXBORO、英维思TRICONEX 、本特利BENTLYA-B罗克韦尔、艾默生EMERSON OVATIONMOTOROLAXYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTHKUKANIDEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOGPROSOFT等品牌

 

 



更多
查看更多 >>

推荐产品