IPC40.2G1A-512N-P8C-ND-NN-FW 伺服驱动计算机 Rexroth

产品标题：IPC40.2G1A-512N-P8C-ND-NN-FW 伺服驱动计算机 Rexroth

型号：IPC40.2G1A-512N-P8C-ND-NN-FW 伺服驱动计算机  

品牌:  Rexroth

质保：七天验收期，质保期一年
发货期：1-3个工作日

产品图片展示

产品详情资料   
更换缓冲电池
缓冲时使用锂电池。
缓冲电池的寿命（CPU不工作，模块无电压馈电）：
TA=25°C时1000天，
TA=60°C时200天
建议更换缓冲电池（CPU正在运行，模块有电压
喂养）迟在6年后。
更换H41q/H51q系统的外部电池：
1.无焊片电池：
CR-1/2 AA-CD，HIMA零件号440000019。
拆下蓄电池盖，将蓄电池从支架上松开，然后插入新蓄电池。检查极性！
2.带焊片的电池：CR-1/2 AA-CD，HIMA零件号440000016
将电池焊接出支架（先焊+极，然后焊-极）。焊接时，检查极性是否正确
首先焊接-极，然后焊接+极。
H41q系统的外部电池：母线板的背板
取决于如上所述的电池类型变化。
H51q系统的外部电池：电源监控模块F 7131
模块可以在通电状态下拉出。然后按说明更换电池
在上面检查极性！
中央模块：F 8650E/F 8650X、F 8651E/F 8651X、F 86 52E/F 8652X、，
F 8653E/F 8653X
电池：CR 2477N，HIMA零件号44 0000018
建议迟在6年后更换缓冲电池（CPU运行中，带电压馈电的模块），或在三个月内更换显示BATI。
有关更多信息，请参阅“如何插入和删除模块”一章
通道系统，这当然会导致设备停机，在冗余系统中
系统反应取决于构型。
协处理器模块F 8621A
此模块可作为选件安装在H41q/H51q系统的中央机架内
家庭在H41q系统中，协处理器模块通过底板上的电池进行缓冲，
在H51q系统中，这是通过F 7131电源监控模块上的电池实现的。A.
需要协处理器模块来保存控制通信的主程序
PES系统（从机）之间。Exchange of the Buffering Batteries
For buffering lithium batteries are used.
Lifetime of the buffer batteries (CPU not in operation, modules without voltage feeding):
1000 days at TA = 25 °C,
 200 days at TA = 60 °C
It is recommended to change the buffer batteries (CPU in operation, modules with voltage
feeding) at the latest after 6 years.
Changing of external batteries of the systems H41q/H51q:
1. Battery without soldering lug:
CR-1/2 AA-CD, HIMA part no. 440000019.
Remove battery cap, loose battery out of the holder and plug in new battery. Check the polarity!
2. Battery with soldering lug: CR-1/2 AA-CD, HIMA part no. 440000016
Solder battery out of holder (first + pole then - pole). At solder in check the correct polarity
and first solder the - pole then the + pole.
External batteries of the systems H41q: Backplane of the bus plate
Dependent on the battery type changing as described above.
External batteries of the systems H51q: Power supply monitoring module F 7131
The module can be pulled out in the energized state. Then change the battery as described
above. Check the polarity!
Central modules: F 8650E / F 8650X, F 8651E / F 8651X, F 8652E / F 8652X,
F 8653E / F 8653X
Battery: CR 2477N, HIMA part no. 44 0000018
It is recommended to change the buffer battery (CPU in operation, modules with voltage feeding) at the latest after 6 years, or with display BATI within three months.
Further informations you will find in chapter “How to Insert and to Remove Modules“. For single
channel systems this results of course in a shutdown of the plant, in redundant systems the
system reaction depends on the configuration.
Coprocessor module F 8621A
This module may be installed as an option within the central rack of the H41q/H51q system
family. At H41q system the coprocessor module is buffered via the batteries on the backplane,
at H51q system this is done by batteries on the F 7131 power supply monitoring module. A
coprocessor module is needed to hold the master program for controlling the communication
between PES systems (slaves).

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌