RC SYSTEMS 16, 32, 48, 64 通道报警控制器 CHANNEL GRAPHIC

产品标题：RC SYSTEMS 16, 32, 48, 64 通道报警控制器 CHANNEL GRAPHIC

型号：RC SYSTEMS 16, 32, 48, 64 通道报警控制器  

品牌  CHANNEL GRAPHIC

质保：七天验收期，质保期一年
发货期：1-3个工作日

产品图片展示

产品详情资料
本章的配置部分与Advant OCS with Master相关
软件（Advant Controller 410和Advant控制器450）。供参考
如何使用MOD 300为Advant OCS配置Advant Fieldbus 100
软件，请参阅Advant Controller 460用户指南。请注意表3-5
表3-9与使用MOD 300软件的Advant OCS有关。
工作站通过通信接口连接到Advant Fieldbus 100。有
不同类型站点的通信接口。通信接口
在网络中执行多个功能，例如管理过程数据和消息传输，
总线主功能和循环数据包（CDP）的配置。
通信接口从站点配置。工作站提供以下属性
安装通信接口，并将其投入运行并监督其性能。
该程序在第5章“维护和故障跟踪”中有详细描述。
3.1.1 CDP超时机制
为了监视CDP数据，使用了超时机制。CDP在总线上循环发送
对于每个CDP，每次接收到CDP时都会设置一个有效标志。如果CDP尚未
在后四个周期内接收到有效标志被重置。
注释
对于较旧版本的通信接口，重置CDP有效标志
五个周期后The configuration part of this chapter is related to Advant OCS with Master
Software (Advant Controller 410 and Advant Controller 450). For information
how to configure the Advant Fieldbus 100 for Advant OCS with MOD 300
Software, see the Advant Controller 460 User’s Guide. Please note that Table 3-5
and Table 3-9 is related to Advant OCS with MOD 300 Software.
A station is connected to the Advant Fieldbus 100 through a communication interface. There are
different communication interfaces for each type of station. The communication interface
performs several functions in the network, such as managing process data and message transfer,
the bus master function, and the configuration of cyclic data packages (CDPs).
The communication interface is configured from the station. The station provides attributes to
install the communication interface, and take it into operation and supervise its performance.
This procedure is described in detail in Chapter 5, Maintenance and Fault Tracing.
3.1.1 CDP time out mechanism
For monitoring CDP data, a time out mechanism is used. CDPs are sent cyclically on the bus
and for each CDP a valid flag is set each time the CDP is received. In case the CDP has not been
received during the last four cycles the valid flag is reset.
NOTE
For older versions of the communication interfaces the CDP valid flag is reset
after five cycle

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌