ADPC-101 用于模拟信号到数字可编程转换器 UNICONT

产品标题：ADPC-101 用于模拟信号到数字可编程转换器 UNICONT

型号：ADPC-101 用于模拟信号到数字可编程转换器 

品牌：  UNICONT

质保：七天验收期，质保期一年
发货期：1-3个工作日

产品图片展示

产品详情资料
 更改而联机更改其配置，则CI626
更新自己的扫描表，然后请求成为总线主控。当总线控制扫描表时
分发给所有其他总线管理员。
3.2.3.3删除CI626
如果要删除通信接口，所有配置的DSP必须
在总线上所有配置了DSP的站点中删除，或从受影响的通信中删除
界面如果没有删除DSP，相应的CDP将保留在扫描表中
从而占用宝贵的带宽。作为发送，必须从电台中删除CDP
CDP信号地址不能被任何其他站使用，除非
整个总线重新启动。这也可能会产生错误，指示CDP传输丢失。
 r responsibilities.This is indicated on the front panel by turning on the “MASTER”
LED and the “CONFIG OK” LED, both yellow.
Figure 3-5. DB Element for CI626
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advant® Fieldbus 100 User’s Guide
Section 3.2.3 Communications Interface CI626
3BSE 000 506R701 3-9
If the CI626 communication interface detects the presence of a bus master on the AF 100,
it tries to get synchronized. When synchronized and if its internal configuration matches that of
the bus master, it turns on the “CONFIG OK” LED.
If a CI626 is commanded operational on a bus where other communication interfaces already
shares the bus master responsibilities, the CI626 sends a message to the current master to notify
its presence. The current bus master then sends the scan table to the CI626 while carrying out
the bus master responsibilities. When the scan table is received the “CONFIG OK” LED is
turned on. The CI626 adds its own CDPs to the scan table and then asks to become current bus
master. After receiving the bus mastership the new updated scan table is distributed to all other
bus administrators.
If a CI626 gets its configuration changed on-line due to changes in the database the CI626
updates its own scan table and then asks to become bus master. When bus master the scan table
is distributed to all other bus administrators.
3.2.3.3 Removing a CI626
If the communication interface is to be permanently removed, all configured DSPs must be
deleted in all stations on the bus having DSPs configured to or from the affected communication
i 

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌