A1-116-180-501 用于控制主微处理器PCB主板 SIEMENS

产品标题：A1-116-180-501 用于控制主微处理器PCB主板 SIEMENS

型号：A1-116-180-501 用于控制主微处理器PCB主板 

品牌：  SIEMENS

质保：七天验收期，质保期一年
发货期：1-3个工作日

产品图片展示

产品详情资料
如果CI626因数据库更改而联机更改其配置，则CI626
更新自己的扫描表，然后请求成为总线主控。当总线控制扫描表时
分发给所有其他总线管理员。
3.2.3.3删除CI626
如果要删除通信接口，所有配置的DSP必须
在总线上所有配置了DSP的站点中删除，或从受影响的通信中删除
界面如果没有删除DSP，相应的CDP将保留在扫描表中
从而占用宝贵的带宽。作为发送，必须从电台中删除CDP
CDP信号地址不能被任何其他站使用，除非
整个总线重新启动。这也可能会产生错误，指示CDP传输丢失。
删除DSP后，可以删除通信接口CI626。如果
其他剩余通信接口之间的传输不应受到干扰
务必确保在LED指示灯亮起时，通信接口不会被拆除
“MASTER”（主控）已打开。这可以通过关闭受影响电台的电源或
LED“MASTER”熄灭后立即拆除总线电缆（这意味着
总线主功能的责任已移交给下一次通信
接口）。其余通信接口将自动继续共享总线
掌握他们之间的责任，忽略被移除的站点。
3.2.3.4 CI626状态信息
将应用程序下载到Advant时，可以获得有关CI626的状态信息
控制器110 CPU，通过读取CPU的错误缓冲区或通过模块诊断。后者
一个是在相应诊断工具的文档中描述的。
Advant Controller 110 CPU配置CI626期间发生的错误
正常操作期间发生的错误被插入CPU的错误缓冲区。以下列表
包含这些错误的摘要。If a CI626 gets its configuration changed on-line due to changes in the database the CI626
updates its own scan table and then asks to become bus master. When bus master the scan table
is distributed to all other bus administrators.
3.2.3.3 Removing a CI626
If the communication interface is to be permanently removed, all configured DSPs must be
deleted in all stations on the bus having DSPs configured to or from the affected communication
interface. If the DSPs are not deleted, the corresponding CDPs will be kept in the scan tables
and thereby occupying valuable bandwidth.As a sending CDP must be deleted from the station
by which it is configured, the CDP signal address can not be used by any other station unless the
whole bus is restarted. This might also generate errors indicating missed CDP transmission.
When the DSPs have been deleted, the communication interface CI626 can be removed. If the
transmission between the other still remaining communication interfaces shall not be disturbed
it is important to make sure that the communication interface is never removed while the LED
“MASTER” is on. This can be achieved by switching off the power of the affected station or
removing the bus cable immediately after the LED “MASTER” goes off (which means that the
responsibility for the bus master function has been passed over to the next communication
interface). The remaining communication interfaces will automatically continue to share the bus
master responsibilities between them and ignore the removed station.
3.2.3.4 CI626 Status Information
Status information about the CI626 is available during download of application to Advant
Controller 110 CPU, by reading the error buffer of CPU or via module diagnostics. The latter
one is described in documentation of corresponding diagnosis tool.
Error that occur during configuration of the CI626 by Advant Controller 110 CPU and those
that occur during normal operation are inserted into CPU’s error buffer. The following list
contains a summary of those errors. 

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌