5610102150 EV07-001-060-420-2DIAA 气动控制器 Rexroth

产品标题：5610102150 EV07-001-060-420-2DIAA 气动控制器 Rexroth 

型号：5610102150 EV07-001-060-420-2DIAA 气动控制器  

品牌：   Rexroth

质保：七天验收期，质保期一年
发货期：1-3个工作日

产品图片展示

产品详情资料
当PM810启动并配置时，通信接口自动
激活。
如果Advant Fieldbus 100接口的CDP配置因添加而更新，
更改或删除DSP时，会通知当前总线主机，并更新扫描表。全部的
然后，其他总线管理员将从当前总线主机接收更新的扫描表。
3.2.4.3移除PM810
如果Advant Controller 70站要从Advant Fieldbus 100移除，
必须删除总线上所有配置为或的DSP的站点中的所有配置的DSP
从受影响的车站。如果未删除DSP，则相应的CDP将保留在
扫描表，从而占用宝贵的带宽。作为发送CDP必须删除
CDP信号地址不能被任何其他用户使用
除非整辆车重新启动，否则停止。这也可能会生成错误，指示未命中CDP
传输
3.2.4.4 PM810中的Advant Fieldbus 100接口状态信息
PM810中Advant Fieldbus 100通信接口的状态信息为
即使在将应用程序下载到Advant Controller 70 CPU时，也可以通过读取
CPU的错误缓冲区或通过模块诊断。文档中描述了后者
相应的诊断工具。
PM810配置过程中发生的错误和正常过程中出现的错误
操作被插入CPU的错误缓冲区。以下列表包含这些内容的摘要
错误。更多信息请参见When the PM810 is started and configured, the communication interface is automatically
activated.
If the CDP configuration for the Advant Fieldbus 100 interface get updated due to adding,
changing or deleting a DSP, the current bus master is notified and will update the scan table. All
other bus administrators will then receive the updated scan table from the current bus master.
3.2.4.3 Removing a PM810
If an Advant Controller 70 station is to be permanently removed from Advant Fieldbus 100,
all configured DSPs must be deleted in all stations on the bus having DSPs configured to or
from the affected station. If the DSPs are not deleted, the corresponding CDPs will be kept in
the scan tables and thereby occupying valuable bandwidth. As a sending CDP must be deleted
from the station by which it is configured, the CDP signal address can not be used by any other
station unless the whole bus is restarted. This might also generate errors indicating missed CDP
transmission.
3.2.4.4 Advant Fieldbus 100 Interface Status Information in PM810
Status information about the Advant Fieldbus 100 communication interface in PM810 is
available, even during download of application to the Advant Controller 70 CPU, by reading the
error buffer of the CPU or via module diagnostics. The latter one is described in documentation
of corresponding diagnosis tool.
Error that occur during configuration of the PM810 and those that occur during normal
operation are inserted into CPU’s error buffer. The following list contains a summary of those
errors. For further information se

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌