EASYGEN-2500-5 8440-1884 安装于发电机组控制器 Woodward

产品标题：EASYGEN-2500-5 8440-1884 安装于发电机组控制器 Woodward

型号：EASYGEN-2500-5 8440-1884 安装于发电机组控制器  

品牌：   Woodward

质保：七天验收期，质保期一年
发货期：1-3个工作日

产品图片展示

产品详情资料
  Controller已将个设置为可操作。
有关设置和配置S800 I/O站的信息，请参阅S800 I/O用户指南。
3.2.5.3删除CI810
当要删除CI810和S800 I/O系统时，所有配置的CDP
必须删除。这可以通过重置IMPL标志或执行DDB命令来完成
至S800 I/O站DB元件。用另一个CI810替换通信接口
通信接口，见第5.4.2节，带错误指示的运行中。
要卸下S800 I/O站，请执行以下步骤：
•重置IMPL终端或对CI810数据库元素执行DDB命令。
•从CI810上卸下Advant Fieldbus 100。
图3-7.CI810的DB元素
Artisan Technology Group-质量仪器…保证|（888）88-SOURCE | www.artistg.com
Advant®Fieldbus 100用户指南
第3.3节数据集外围通信
3BSE 000 506R701 3-13公司
3.2.5.4 CI810状态信息
通信接口CI810的状态信息可用于DB元件
S800 I/O站。
CI810的状态由S800 I/O站DB元素中的DIAG终端给出。
DIAG端子上给出了以下状态信息：
ACT CI810正在运行。
IDF标识失败。
SE严重错误：站中出现严重错误。
HWE站硬件错误。CI810硬件出错。
SWE站软件错误。重新启动CI810可能会清除错误。
 nal by the Advant Controller.
For setting up and configuring the S800 I/O station refer to S800 I/O User’s Guide.
3.2.5.3 Removing a CI810
When the CI810 and the S800 I/O system is to be permanently removed, all configured CDP’s
must be deleted. This is done by either resetting the IMPL flag or performing a DDB command
to the S800 I/O station DB element. Replacing the communication interface with another CI810
communication interface, see Section 5.4.2, In Operation with Error Indications.
To remove the S800 I/O station, perform the following steps:
• Reset the IMPL terminal or perform a DDB command on the CI810 data base element.
• Remove the Advant Fieldbus 100 from the CI810.
Figure 3-7. DB Element for CI810
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advant® Fieldbus 100 User’s Guide
Section 3.3 DataSet Peripheral Communication
3BSE 000 506R701 3-13
3.2.5.4 CI810 Status Information
The status information of the communication interface, CI810, is available with the DB element
S800 I/O Station.
The status of the CI810 is given by the DIAG terminal in the S800 I/O Station DB element.
The following status information is given on the DIAG terminal:
ACT CI810 is operating.
IDF Identity failure.
SE Severe Error: Severe errors in the station.
HWE Station Hardware Error. An error in CI810 Hardware.
SWE Station Software Error. Restart of the CI810 should probably clear the error.
PHE Peripheral Hardware error. Hardware error or missing hardware.
PRE Process Errors. ‘Soft’ error condition, for example, I/O channel out of range.
CRA Cable Redundancy Available. Indicates that the CI810 is configured to
have redundant bus cables.
SNA Station Not Availa
  

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌