929688514 用于模块备用控制单元 PCB主板卡 LIEBHERR

产品标题： 929688514 用于模块备用控制单元 PCB主板卡 LIEBHERR

型号： 929688514 用于模块备用控制单元 PCB主板卡 LIEBHERR

品牌：

质保：七天验收期，质保期年
发货期：1-3个工作日

产品图片展示

产品详情资料

 ）
Modbus/TCP协议
支持
PACSystems Ethernet Interface固件3.00版支持Modbus/TCP
Series 90-30 LAN Interface Module（IC693CMM321）的服务器功能。然而，这
该版本不支持IC693CMM321的Modbus/TCP客户端通道功能。
程序员版本
要求
专业™ 必须使用Machine Edition Logic Developer PLC 5.0 Service Pack 3或更版本
对PLC CPU进行Modbus/TCP操作编程。
CIMPLICITY®工厂
版本版本
要求
CIMPLICITY Plant Edition 6.1 Service Pack 1a，带更新040204_s90tcp_6101或服务
包2或更版本必须用于与PAC系统的以太网通信™ 以太网
接口。
此版本解决的问题
主题描述
记录SNTP错误的时间
未配置
Ethernet接口不再在Ethernet异常日志中记录SNTP事件
（事件=29H，条目2=01H），即使配置了以太网时间同步
将SNTP改为None。
车站经理
“EGDCMD st”5月报告
数据不正确
“EGDCMD st”报告的EGD样本到期时间和EGD交换状态
命令现在是准确的。
避免ARP过快
缓存刷新
级用户参数“fflush”现在可以设置为低于5秒（降至1秒
秒）。
较旧的网络设备
和滋扰性故障
当Ethernet接口连接到某些
网络设备，如在500ms或更短时间内未完成速度协商的集线器。
“内部错误”异常
 PACSystems Ethernet Interface firmware supports the Modbus/TCP
Server capability of the Series 90-30 LAN Interface Module (IC693CMM321). However, this
release does not support the Modbus/TCP Client Channels capability of IC693CMM321.
Programmer Version
Requirements
Proficy™ Machine Edition Logic Developer PLC 5.0 Service Pack 3 or later must be used to
program the PLC CPU for Modbus/TCP operation.
CIMPLICITY® Plant
Edition Version
Requirements
CIMPLICITY Plant Edition 6.1 Service Pack 1a with Update 040204_s90tcp_6101or Service
Pack 2 or later must be used for Ethernet communications with PACSystems™ Ethernet
Interfaces.
Problems Resolved for this Release
Subject Description
SNTP Error Logged When
Not Configured
The Ethernet Interface no longer logs an SNTP event in the Ethernet exception log
(Event = 29H, Entry 2 = 01H) even though Ethernet time synchronization is configured
as None instead of SNTP.
Station Manager
“EGDCMD st” May Report
Incorrect Data
The EGD sample due time and EGD exchange state as reported by the “EGDCMD st”
command are now accurate.
Avoid Too-rapid ARP
Cache Flushing
The Advanced User Parameter “fflush” can now be set lower than 5 seconds (down to 1
second).
Older Network Devices
And Nuisance Faults
The Ethernet Interface no longer gives nuisance faults when connected to certain
network devices, such as hubs that do not complete speed negotiation in 500 ms or less.
“Internal Error” Exception
when Duplicate EGD
Producer IDS
An exception (Entry = 28, Entry 2= 24) will not appear in the exception log if another
EGD producer on the network is using the same Producer ID as the Ethernet interface.
EGD Tally Inconsistency The EGD consumption transfer tally “DataRx” no longer increments if the incoming EGD
message is discarded due to signature mismatch.
Blink Code “2-8” on
Ethernet Interface After
Multiple Rapid Power
Cycles
The Ethernet Interface no longer displays a blink code of “2-8” after rapid multiple power
cycles. Resetting the Ethernet Interface returns it to normal operation.
Don’t “Loopback” EGD The loopback IP address 127.0.0.1 may now be used to produce and consume EGD. 
 

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌