ADPC-101 用于模拟信号到数字可编程转换器

产品标题： ADPC-101 用于模拟信号到数字可编程转换器 UNICONT

型号：ADPC-101 用于模拟信号到数字可编程转换器 UNICONT

品牌：

质保：七天验收期，质保期年
发货期：1-3个工作日

产品图片展示

产品详情资料

COMMREQ不正确
无效状态字
读取Exchange EGD
命令
当EGD读取交换命令引用超出范围的本地PLC引用时
Ethernet接口现在返回COMMREQ状态字9085H
不将任何数据写入本地PLC参考存储器。
SRTP中的值不正确
PDU消息错误
当SRTP服务器检测到内部SRTP正在处理SRTP目的地时
响应，它现在将正确的错误代码值插入到生成的SRTP错误PDU中
消息（即内部SRTP错误值现在小于40（=28H））。
处的网络脱机故障
非默认通电
AUP设置
Ethernet接口不再记录网络脱机异常（事件=20，条目2=
1） 当使用“lduplexXX”或“lspeedXX”AUP的非默认设置通电时
参数。
车站经理
“EGDCMD st”5月报告
采样时间不正确
“EGDCMD ST”报告的生产交换EGD样本到期时间
（=EGD统计）命令现在正确。
此版本的新功能
RX3i Ethernet Interface Module 3.00版提供了以下新功能和增强功能：
多支持32个SRTP通道：SRTP（客户端）通道提供从PLC到PLC或从
使用SRTP/TCP/IP协议通过以太网将PLC连接到主机应用程序SRTP服务器。
总共多达80个SRTP/TCP连接，包括多达48个SRTP服务器连接和多达32个客户端
频道。
PACSystems以太网接口支持与Series 90 Ethernet接口相同的通道命令集，并且
使用相同的命令块格式。请参阅PACSystems TCP/IP Ethernet Communications Manual，
GFK-2224C或更高版本）。请注意，通过名称指定远程PLC或主机应用程序SRTP服务器不是
PAC系统支持。通道命令包括：
建立读取通道（2003）。请求在本地PLC（客户端）和
远程PLC（服务器）以及从远程PLC读取并传输至本地PLC的数据。
建立写入通道（2004）。请求在本地PLC和远程PLC之间建立通道
PLC和来自本地PLC的数据
The Ethernet Interface no longer displays a blink code of “2-8” after rapid multiple power
cycles. Resetting the Ethernet Interface returns it to normal operation.
Don’t “Loopback” EGD The loopback IP address 127.0.0.1 may now be used to produce and consume EGD. Incorrect COMMREQ
Status Word for Invalid
Read Exchange EGD
command
When an EGD Read Exchange command references out-of-range local PLC reference
memory, the Ethernet Interface now returns COMMREQ status word 9085H and does
not write any data to local PLC reference memory.
Incorrect Value in SRTP
Error PDU Message
When the SRTP Server detects an internal SRTP processing the SRTP Destinations
response, it now inserts a correct error code value into the resulting SRTP Error PDU
message (i.e. the internal SRTP error value is now less than 40 (= 28H)).
Network Offline Fault at
Powerup With Non-default
AUP Settings
The Ethernet Interface no longer logs a network offline exception (Event = 20, Entry 2 =
1) when powered up with non-default settings for “lduplexXX” or “lspeedXX” AUP
parameters.
Station Manager
“EGDCMD st” May Report
Incorrect Sample Time
The EGD sample due time for Produced exchanges as reported by the “EGDCMD ST”
(= EGD Statistics) command is now correct.
New Features for this Release
Release 3.00 of the RX3i Ethernet Interface Module provides the following new features and enhancements:
Support for up to 32 SRTP Channels: SRTP (Client) Channels provides communication from PLC to PLC, or from
the PLC to a host application SRTP server, over an Ethernet Network using the SRTP/TCP/IP protocol.
Up to 80 SRTP/TCP connections total, consisting of up to 48 SRTP Server connections and up to 32 Client
Channels.
PACSystems Ethernet Interfaces support the same set of Channel commands as Series 90 Ethernet Interfaces, and
use identical Command Block formats. Please refer to the PACSystems TCP/IP Ethernet Communications Manual,
GFK-2224C or later) for details. Note that specifying a Remote PLC or Host Application SRTP Server by name is not
supported in PACSystems. The Channel Commands are:
Establish Read Channel (2003). Requests that a channel be established between the Local PLC (client) and a
Remote PLC (server) and that data be read from the Remote PLC and transferred to the Local PLC.
Establish Write Channel (2004). Requests that a channel be established between the Local PLC and a Remote
PLC and that data from the Local PLC be tra
 

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌